Rescue type tools
-
@micky d said:
Well between Def and Dunc, they'll probably had all the rescue tool on the market, so you might want to listen to there advice more than mine :D
Weren't they going to do a rescue tool shoot out?
:DOne day ;) Also have a look at a Spyderco Assist , what a beast
Its the middle one

Now listen
A slip joint makes a very poor rescue knife . In a situation your heart will be going like stink and adrenalin will be surging round your body ( at this piont you will decide whether to fight or flight ) and the chances of a slip joint folding on your fingers is very high . A blunt tip blade is a must , one hand opening is advisable BUT I can deploy the belt cutter on my RS VERY quick because its so familiar to me although gloves are a problem .Also keep it very sharp and resist the urge to use it for everyday things , that way its sharp when you need it . The Rescom is good but small . I think I would recommend something by Spyderco with a blunt tip and a bright coloured handle .Dunc
-
Ben I'll bring what I can to the meetup but I know longer have the Assist .
My Atlantic Salt is very good if a little ugly ;) The serrations are very aggressive and can snag, but seatbelt , webbing straps etc are no problem and it can hack through plastic and thick material.
What I will do is bring a load of rope to the meetup and you can have a play .Dunc
-
Thanks for the suggestions guys. That lifehammer looks pretty handy.
I really like the look of the Spyderco assist, but I very much doubt a copper would like the look of it. :-\ I know the chances of being stopped and searched are very slim, but I drive past 2 police stations on my way to work and I see at least 1 police car every day. At least you have a reasonable reason for carrying it, I doubt my occupation would count.
-
@Benner said:
Thanks for the suggestions guys. That lifehammer looks pretty handy.I really like the look of the Spyderco assist, but I very much doubt a copper would like the look of it. :-\ I know the chances of being stopped and searched are very slim, but I drive past 2 police stations on my way to work and I see at least 1 police car every day. At least you have a reasonable reason for carrying it, I doubt my occupation would count.
Didnt think of that , sorry :-[ Have you thought about getting a Swisstool RS ? Just depends on how much you use the file .
I have one of those lifehammers somewhere
Would you like it ? I'd have to find it first though .Dunc
-
Thanks for the suggestions guys. That lifehammer looks pretty handy.
I really like the look of the Spyderco assist, but I very much doubt a copper would like the look of it. :-\ I know the chances of being stopped and searched are very slim, but I drive past 2 police stations on my way to work and I see at least 1 police car every day. At least you have a reasonable reason for carrying it, I doubt my occupation would count.
Didnt think of that , sorry :-[ Have you thought about getting a Swisstool RS ? Just depends on how much you use the file .
I have one of those lifehammers somewhere
Would you like it ? I'd have to find it first though .Dunc
I have thought about getting an RS, but I love my files and my current Swisstool has everything I want and has some sentiment attached as it was given to me by someone on here. ;)
I actually quite like the look of this http://www.multitool.org/other-tools/folding-knives/benchmade-ert-1.html
-
Get one so I can have a look at the meet :D
Dunc
-
@dunc5 said:
Get one so I can have a look at the meet :DDunc
:D Cheers pal! You're meant to be recommending me a good one, not just one you don't have so you can take a look. ::) :D
Ideally, I'd like something like a spyderco Jr rescue or similar, but you know what the laws are like here. ::) Plus, I do like the idea of having a glass breaker.
-
I need to get one of those life hammer things...
I also need to get the shootout done, but I want to do it properly so I'm not rushing it!
Def
-
A glass breaker only works on toughened glass i.e the stuff that bursts into millions of little bits . Its no good on windscreens . I have been told that some side windows are now laminated ( like windscreens ) although cant confirm this .I dont claim to know anything about vehicle rescue but I do work in a glass factory ;).
Dunc
-
@dunc5 said:
A glass breaker only works on toughened glass i.e the stuff that bursts into millions of little bits . Its no good on windscreens . I have been told that some side windows are now laminated ( like windscreens ) although cant confirm this .I dont claim to know anything about vehicle rescue but I do work in a glass factory ;).Dunc
My car is pretty old so I doubt my side windows are laminated. :D
Just found these for those who may be interested...
http://www.youtube.com/watch?v=C-2tA_YTp_w
http://www.youtube.com/watch?v=SuHKP87f8l0
http://www.youtube.com/watch?v=Q50n4etp7ak -
Modern side windows are laminated so they don't explode all over the victim the way they used to. Breaking the glass still works though as the shattering makes it into a flexible sheet that you can then pull out. Of course, don't try that without gloves!
Def
-
That certainly looks impressive .Especially since he done it in the centre of the window . If you only have an impact tool on you ( lifehammer , multitool ) hit it right in the corner otherwise the glass will flex and absord the impact .
Dunc
-
I carry a life hammer in the car and seem to remember that the police supplies web site has a key ring sized spring loaded window breaker and seatbelt cutter but I can't get onto it to confirm
-
@jock1 said:
I carry a life hammer in the car and seem to remember that the police supplies web site has a key ring sized spring loaded window breaker and seatbelt cutter but I can't get onto it to confirmOne like this? http://www.multitool.org/miscellaneous-tools/keyring-tools/resqme.html
-
Maybe a ResQme or the benchmade are the way to go, I can't see why a copper would have a problem with you having either in your car (in the high street yes, as you'll look like a high tech car jacker :D)
Group by on ResQMe's ???
-
@micky d said:
Maybe a ResQme or the benchmade are the way to go, I can't see why a copper would have a problem with you having either in your car (in the high street yes, as you'll look like a high tech car jacker :D)Group by on ResQMe's ???
I'm thinking about maybe getting a couple of ResQMe's (so the wife can have one) and the benchmade as well.
-
How much would a ResQme tool work out at ???
-
Marc does them for $8.95 + P&P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

