Two Olde English multitools
-
I think the Crown Corker is the same company that made the British SOE/US-OSS escape knife of WW2 fame. The "first"multitool

-
@BIG-TARGET said:
I think the Crown Corker is the same company that made the British SOE/US-OSS escape knife of WW2 fame......That's an interesting theory BT. The OSS Escape Knives were made by Joseph Rodgers and George Ibberson, both old time cutlery companies from Sheffield England.

-
Like the british Sten gun. Manufacture in the basment of many british homes at the price of a Happy meal. And not much serious machining involved

-
@BIG-TARGET said:
I think the Crown Corker is the same company that made the British SOE/US-OSS escape knife of WW2 fame.Its possible but it doesn't say made in Sheffield, so it could easily be made some where else in this fine island...
-
One of the 1/4" hex bits that came with he Versatool is kinda unusual:
It has a little wheel of hardened metal (carbide? diamond?) for etching or cutting glass. I tried it on a bottle just now and it scrapes away glass just fine. Doesn't cut through obviously, but does etch a shallow crease.
Uh.....so what would something like this really be used for?

-
I think cutting glass. Score the glass, then "break" it on the line with another tool..like this!

-
@Corrugated said:
I think cutting glass. Score the glass, then "break" it on the line with another tool..like this!
I've seen pictures before but never tried it. Does it actually work that well?
-
Or ceramic tiles.
-
Hmmm, don't we have a prominant member here who works in a glass factory?
;) -
I think cutting glass. Score the glass, then "break" it on the line with another tool..like this!

I've seen pictures before but never tried it. Does it actually work that well?
Works very well. Wet the line you are going to cut with kerosene, start at one edge with moderate pressure. If you are doing it right you will hear a nice sizzle noise of the cutter rather than a chipping sound. After the line is scored, tap on the underside of the glass along the line with a hard object like the ball end of the cutter illustrated and you will see the cut go through and the glass will fall apart. You can freehand any shape except inside corners. Circles can be cut with a special cutter or guide. Old glass is harder to cut than new glass.
-
@kent ct said:
Works very well. Wet the line you are going to cut with kerosene, start at one edge with moderate pressure. If you are doing it right you will hear a nice sizzle noise of the cutter rather than a chipping sound. After the line is scored, tap on the underside of the glass along the line with a hard object like the ball end of the cutter illustrated and you will see the cut go through and the glass will fall apart. You can freehand any shape except inside corners. Circles can be cut with a special cutter or guide. Old glass is harder to cut than new glass.Thanks Kent. Believe it or not I've never done any glass cutting. Think I'll go find a stray piece and try out your advice with the old Versatool. Its probably not going to work as delicately as a purpose-built glass cutting tool, but it should give me the general idea. :)
-
@lonediver said:
Hi Bob ,Nice chatting with you today , the above is kind of neat . I will have to rummage around a bit , I have some variation of a/the versa tool . I sent you an email to one of your addresses , check and see if I got the right one .
Got the message Doug, and replied. Looking forward to hearing about the Versatool variation also! :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login