Ruiss LM Juice XE6 Lookalike - Overview
-
Nice overview
I have the same one and I'd pretty much echo your findings.Do your scissors not quite go all the way down? That's the problem with getting to the saw's nail nick on mine. It's as though it needs a little gringing off the scissors arm for it to go "home" properly. Awl is blunt, scissors don't stow properly, can opener is not very sharp, flat drivers bite you .... they really put some effort into copying the Leatherman offerings didn't they ::)
As you say the two biggest tell tale signs are the file, which I would assume is little more than a textured slab or steel, and I wouldn't risk tackling anything much harder than finger nails with it - but of course the biggest giveaway that this is a cheapo tool - a really piss poor Phillips.
The XE6 is certainly the superior tool, and that's even with my frustration over the Juice line ... HOWEVER ... I would say the clone is probably the better value for money!!! Yes the tool isn't up to the same standard in a number of ways, but at such a tiny fraction of the price for something which on the whole is quite usable, I think I'll be hanging onto mine, even though I traded the XE6 away

-
@50ft-trad said:
Nice overview
I have the same one and I'd pretty much echo your findings.Do your scissors not quite go all the way down? That's the problem with getting to the saw's nail nick on mine. It's as though it needs a little gringing off the scissors arm for it to go "home" properly. Awl is blunt, scissors don't stow properly, can opener is not very sharp, flat drivers bite you .... they really put some effort into copying the Leatherman offerings didn't they ::)
As you say the two biggest tell tale signs are the file, which I would assume is little more than a textured slab or steel, and I wouldn't risk tackling anything much harder than finger nails with it - but of course the biggest giveaway that this is a cheapo tool - a really piss poor Phillips.
The XE6 is certainly the superior tool, and that's even with my frustration over the Juice line ... HOWEVER ... I would say the clone is probably the better value for money!!! Yes the tool isn't up to the same standard in a number of ways, but at such a tiny fraction of the price for something which on the whole is quite usable, I think I'll be hanging onto mine, even though I traded the XE6 away

Hmmm, The scissors on mine stow quite happily but when you snip with 'em the return spring doesn't open 'em up entirely, if you know what I mean.
Sounds like there's a bit of inconsistency at the factory.
Edit: Aha, I see what you mean now, my scissors snap closed nicely but still obscure the nail nick of the saw...I reckon the Leatheman is at least twice as good as this BUT this is 8 times cheaper - I'll stick with the LM for EDC though due to the size and weight difference (I agree with Landrew, the whole point of the Juice range was a pocket sized tool. Although this isn't so huge.)
Your description of the file is perfect!
-
-
Interesting. Design of a Juice, but done one the scale of a full-size Leatherman. This thing weighs as much (actually a little more) than a Wave.
Sounds reasonably nice for under $20.
Thank you for the review.

-
@50ft-trad said:
Nice overview
I have the same one and I'd pretty much echo your findings.Do your scissors not quite go all the way down? That's the problem with getting to the saw's nail nick on mine. It's as though it needs a little gringing off the scissors arm for it to go "home" properly. Awl is blunt, scissors don't stow properly, can opener is not very sharp, flat drivers bite you .... they really put some effort into copying the Leatherman offerings didn't they ::)
As you say the two biggest tell tale signs are the file, which I would assume is little more than a textured slab or steel, and I wouldn't risk tackling anything much harder than finger nails with it - but of course the biggest giveaway that this is a cheapo tool - a really piss poor Phillips.
The XE6 is certainly the superior tool, and that's even with my frustration over the Juice line ... HOWEVER ... I would say the clone is probably the better value for money!!! Yes the tool isn't up to the same standard in a number of ways, but at such a tiny fraction of the price for something which on the whole is quite usable, I think I'll be hanging onto mine, even though I traded the XE6 away

Hmmm, The scissors on mine stow quite happily but when you snip with 'em the return spring doesn't open 'em up entirely, if you know what I mean.
Sounds like there's a bit of inconsistency at the factory.
Edit: Aha, I see what you mean now, my scissors snap closed nicely but still obscure the nail nick of the saw...I reckon the Leatheman is at least twice as good as this BUT this is 8 times cheaper - I'll stick with the LM for EDC though due to the size and weight difference (I agree with Landrew, the whole point of the Juice range was a pocket sized tool. Although this isn't so huge.)
Your description of the file is perfect!
... and if I look at the very tip of my scissors, they seem a little high. I think it's the scissor arm that's stopping them go lower as I can't see any other obstruction but there's a very definite and solid stop that you can actually hear. I might just trim it down a little to see if it makes a difference
I'll check out the scissors spring on mine tonight to see how it's behaving
-
Very interesting.
thanks for this. I see them occasionally on ebay in different configurations. They at least make a black scaled "Juice"
Never realized the size and weight difference though. -
Nice write-up mate.
I will say that as I find the Xe6 a bit thick and heavy for pocket carry I very much doubt I will be getting one of these. 
-
-
Nice write-up mate.
I will say that as I find the Xe6 a bit thick and heavy for pocket carry I very much doubt I will be getting one of these. 
if they made a S2 copy, I'd get a WHOLE bunch of them and stash them in places around my house, car, shop, scooter...ANYWHERE!
agreed.

-
I would agree ... if they'd revisit the Phillips situation

@EddieEnzyme ... sorry pal, my scissor spring works just fine

-
@50ft-trad said:
I would agree ... if they'd revisit the Phillips situation
@EddieEnzyme ... sorry pal, my scissor spring works just fine

I must just have a sticky one!
I noticed there's another model for $12 posted (!!) with one less layer - kind of CS4 sized but with a different tool load - seems to have a file, plain edged blade, serrated blade and a couple of non-LM tools (bottle opener/driver and a can opener)
Of course I ordered one, it'd be rude not to....

-
@50ft-trad said:
I would agree ... if they'd revisit the Phillips situation

@EddieEnzyme ... sorry pal, my scissor spring works just fine

I must just have a sticky one!
I noticed there's another model for $12 posted (!!) with one less layer - kind of CS4 sized but with a different tool load - seems to have a file, plain edged blade, serrated blade and a couple of non-LM tools (bottle opener/driver and a can opener)
Of course I ordered one, it'd be rude not to....

Where are you finding these jewels from the East?
-
@50ft-trad said:
I would agree ... if they'd revisit the Phillips situation

@EddieEnzyme ... sorry pal, my scissor spring works just fine

I must just have a sticky one!
I noticed there's another model for $12 posted (!!) with one less layer - kind of CS4 sized but with a different tool load - seems to have a file, plain edged blade, serrated blade and a couple of non-LM tools (bottle opener/driver and a can opener)
Of course I ordered one, it'd be rude not to....

Where are you finding these jewels from the East?
Right here -
http://www.aliexpress.com/wholesale?SearchText=multi+tool&catId=0&manual=y

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login