Help with Leatherman TTi
-
Thanks!
I'm in UK and it was ordered from Ebay. It was suppose to be despatch from UK but the guy said they ran out of stock and had to get it from US.
-
I'm in UK and it was ordered from Ebay. It was suppose to be despatch from UK but the guy said they ran out of stock and had to get it from US.
Great another Brit :), I find it a bit unlikely that they ran out in the UK ::), I'd have words with the seller, as it's clearly not new :(
-
Another Uk member. :) Welcome buddy!
It does look a little used, but like Roadie said, the stiffness sounds normal.
-
yes and you shouldn't have to pay a higher price (new) for a used one (whatever it was)

I'd ask for a new one or some cash back.and welcome to the forum!
-
Welcome the forum man.
My Charge AL and ALX were very stiff to open when I first got them. I used the movie/TV break in method. Watch a movie or TV and and open and close the pliers over and over again. It will break in faster and loosen it up alittle. -
While there's nothing wrong with it, I would still contact the seller and bring their attention to it. A reputable seller should look after you, and even if they don't, you at least have a good tool.
Best of luck, and let us know how it works out for you.
Def
-
Did you pay via paypal? If so, file a claim immediately (regardless of other communication with the seller, which you should pursue since it is possible they will give you a full or partial refund) since having the paypal claim in the background adds pressure to the seller to resolve the case in a satisfactory way.
File the claim under the 'not as described' since if in the auction it was listed as 'new' than you have been cheated, paypal may ask for evidence, you have some very nice close up phootos which clearly show it is not new. You can also write in the claim that although he claimed to be a UK seller, and that his 'stock ran out' (what a load of crap), he was in fact a US seller, so you had to wait an extra long (unexpected at the time of purchase) time for the item to arrive, and were lucky not to have to pay customs charges on top (or were you unlucky enough?)
In future, if you wish to buy a multitool, and want to get it cheaper than you would in the UK, think about asking one of the members of this forum to buy it for you and ship it to you (I had a great experience thanks to Jsews buying a cabela's 3D camouflage and black charge TTI and shipping it to me, I am also a Brit), and there are also a couple of retailers who I am sure Defender will tell you about if he hasn't already who offer very reasonable prices and also shipping charges to the UK.
Just end by saying that it is unfortunate you have had this experience, but it is always a danger with a website such as Ebay, maybe 90% of the time it will work out fine, but there will be times you will be burnt, and unlike with a shop, it can be quite a hassle to get things sorted.
Best of luck.
-
Well, its a tool. Its meant to be used and beat up. If you plan on EDC than it will eventually get beat up! I would say keep the tool because now its used you will not be afraid to use it. As you would a new tool! Just my two cents worth!
-
Yeah, consider yourself lucky you didn't get a Pulse with "some signs of wearing" like I did.... ::)
/topic/2985
Banner advertisers are perhaps your best bet- they all ship internationally, which should be a given on a forum owned by a bloody foreigner like me! You can visit them here:
Felinevet
www.felinevet.sosakonline.comHand-Tools.com
www.hand-tools.comGerber-Tools.com
www.gerber-tools.comDef
-
Hi Weqr, and welcome!
Am I correct in that it appears most of the scratching you have is on the titanium scales? That is odd. Are there any signs of wear on the knife blade,
plier serrations, wire cutter, or screwdriver tips?? (all the places a used tool would normally show wear)Perhaps yours may have been a display sample that got scuffed around but never really "used"? ???
-
Hi there and welcome to the forum weqr!
After several times of opening and closing your TTi the area near the pliers pivot and on the pivot (pin) itself will get superficial scratches as a result of the rubbing action between those areas and the inside of the handles. So, that particular scratches are acceptable to me.
All the other scratches, specially the ones at the tip of the blade are indications that the tool is not new and not acceptable.
Eddie
-
While I agree you should bring it up with the seller I wouldn't go down the road of filing claims and such before speaking with them. If it was an honest mistake I would be rather upset that a buyer didn't even contact me before doing such actions. If they don't make it right then of course it's only right to bust out the big guns. Be sure and keep us posted on what happens.
-
@Leatherman123 said:
Well, its a tool. Its meant to be used and beat up. If you plan on EDC than it will eventually get beat up! I would say keep the tool because now its used you will not be afraid to use it. As you would a new tool! Just my two cents worth!As everyone knows I prefer used tools, but if I had paid for a new one I wouldn't just settle for a used one arriving. I would at least expect some cash back.
-
Thanks for all your replies.
Defender, thats a bad deal you had there. So what happened in the end?
I suppose you could say I was lucky.
Tbh, like Leatherman123 said, its gonna be used anyway and it was bought for myself - not a present so I'm not that fussed. I have contacted the seller and this is what he replied:
all the handles have this "rough" finish for better grip. these tools are direct from leatherman. i do not sell used tools. look at my feedbacks. i do not have time to go buy used tools and sell them as new on ebay. if you are not happy with the tool, return it and i will refund your money less the shipping charge and ebay fees.
He seems reasonable. But as I said, I'm not that fussed (only scratches) and wanted to confirm with you guys that new TTi's are not like that out of the factory. As someone had suggested, it was probably an ex display model. All the tools look new and not used except the knife tip. So I have decided I'm going to keep it but will email him again with the pictures just to show him what he sent me. I'm a little disappointed, nothing more. But that'll teach me a lesson! :D
Btw, what does 'EDC' on this forum mean?
-
EDC= Every Day Carry. :)
-
Well regardless of it condition, you'll love the Charge :)
-
I just also noticed something else.
This was the ad on Ebay:• Charge TTi Multi Tool
• Leather Sheath
• 8 Double-End Bits
• Removable Pocket Clip
• Quick Release Lanyard RingPresentation Gift Tin Case
I got exactly what was shown in this pic. You can see that there are 6 double-end bits in the holder. But there's supposed to be 8 as advertised. What about the one in the TTi, is that to be included or not? Also the holder has holes for 10 bits in total. So whats going on??

-
Well my first Charge was a bit of a modded one, and the second one came in a clam shell :-, but I only got 6 bit's (plus the ones in the tool) with mine :)
-
I would say that they are counting all the bits and therefore the ones "loaded" into the tool as well. So that is right.
-
Defender, thats a bad deal you had there. So what happened in the end?
I left the guy bad feedback, and ended up with a crappy tool. I could have lodged a complaint through eBay and Paypal etc, but it just wasn't worth the effort.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login