What did you use your Sak on today?
-
My wife asked for scissors this morning, so I handed her the Explorer to use. Not sure what she needed them for though as I was busy at the time.
-
I fixed the fax (and faxed). I used Posidrive 1 with my XLTs Cybertool after I found my Spartan's can opener's driver incapable to unscrew some screws. The space was cramped for the short plain Philips and I couldn't rotate the huge XLT inside, but the long Cybertool stem was perfect for the job. A screw fell inside a tight space and I fished it with my magnetised fish scaler. Then I bragged about my XLT to my colleagues, once more!
I magnetised the fishscaler on Saturday with a powerfull pair of magnets I use as a counterweight for my 12" Dobsonian telescope. I got the idea from the SAK Handbook by Mr Young. I couldn't imagine I was going to use it so soon!
I also put 2 long needles (one sharp, one fat) under the Saw and Fishscaler space. I aslo magnetised them to stay in place. I intend to use them as needles (regular and sacking), as cleaning aids for the SAK itself and as a "marlinspike" (I allready used one to untie a stuborn knot).
One can put a regular needle under the hook also. I decided that the long and thin needle will do for me, but you can do it for SAKs without Saw and/or Fishscaler tools. -
I used my kitchen Victorinox Waiter to cut a plastic bottle of milk, because the seal was broken in half before i manage to open the lid.
-
Used the blade of my Compact to open the clamshell pack for a tube of Abreva. Came down with a cold sore yesterday, and I'd rather not endure the two weeks it'll take to completely go away. :ahhh
-
I used the scissors on my Deluxe Tinker to open a package that contained a Spirit.
-
Completely disassembled and reassembled the door lock of the outer aluminium and glass door of our treatment unit. I used the Cybertool with Philips and straight drivers, the normal Philips driver and pliers (a normal plier wouldn't fit, only a needle nose or a SAKs pliers) with some prying.
I also used the Minichamp's hook for clamshell boxes but that is routine now and I wan't mention it again. -
I use my Midnite Manager to screw a door knob back to place.
-
Now I see where the big cats hang out at. :D
Yesterday:
Opened a can of stir fry veggies for dinner. Debated on the can openers to use, but decided to use the Charge TTi's as was missing the American version of can openers. The can must of been some cheap smurfin' metal as the Leatherman can opener left spurs of metal all around the outer edge. So as I was rotating the can I ended up being pierced with three pieces of metal.Found two, pulled them out with the tweezers from my Climber. The third was too small to see, so needed a magnifying class to find the bugger. Got it out. Never underestimate a great pair of Swiss tweezers.
Got to play with an official Vic pin, and the pen too. They came in the mail.
Am finding myself grabbing my Climber more and more. Next time a can needs opened am grabbing the Climber for its Swiss'pawed can opener.
Today:
Aunt brings over a couple of bags of apples & oranges to share with us. BIG delicious smelling oranges, and they were like super cold too. As am carrying them in I swiped one.
Thanks to the Vic SAK tool springs I barely have any thumb nails left to use. Rather than cut the orange up and make a bigger mess, decided to instead peel its cold hard skin .... with .... the Bottle Popper!

That odd looking orange peeler on some former SAK gave me that idea - initially. And... it works great!
Now if I can get my thumb nails to grow back and become stronger, thicker, better... :D -
I had to plug a leaky car tire today with one of those rubber plug kits. The culprit was a small nail in the tire tread. I was racing against the daylight and having real difficulty enlarging the hole to insert the plug using the included round file (those steel belts are tough), but the awl on my Vic Pioneer was a huge help and I finally got the tire plugged.

-
I use my Wenger Watchmaker SAK to change a battery to a watch.
Perfect work without any scratches to the back bezel. -
Used the blade on my Executive to open the mailing envelope my new Evo 88 came in today. :D
-
Used my Super Tinker to open up two new packages today. One package contained two new Wenger SI's and one contained two new Soldiers, one copper and one orange!

-
Used my Climber to open a package from Lowtech of Germany. Which contained some much needed watch parts, and used Spartan. :D
And used the Spartan's small blade to help scrape some of the red substance off of a tough tagua nut piece. Not sure how to get that red material off. Trying white vinegar but doesn't seem to be working.
-
I used the Cybertool for the first time on the D- Subminiature connector of a video projector. It works as a charm and both ways! A screw was stuck on the male cable and it's male threaded part fits inside the Cybertool's stem. So I unscrewed it and screwed it back in place where there wasn't much space left for fingers. Although we had such a tool for 10 years now it is the first time I used it as such and not struggle foolishly with my big and clumsy hands.
-
My OHO Forester helped with some cooking the other day, sliced up some tomatoes real nice and prepped some breakfast the morning after.
Haven't had the need for any of them yet today though.
-
Using the Climber's main blade I cut up some fresh yellow onions, peeled and sliced some small potatoes, and opened a can of Glory Olde Fashioned Blackeyed Peas. Fried the taters and onions with some light canola oil, and heated up the blackeyed peas. Grabbed some bread, and walla! Dinner is served.
Stared at my transparent blue scales and wondering if my wood scale project is going to be overly complicated.
Also wondered why there was never a multitool with an angle/inclination meter on them. Even the clear scales could have a simple metal needle hanging inside from a pivot point, with the common degree markings on the scale.
Victorinox Swiss Developers aren't that imaginative I guess.
-
I used the main blade on my Alox Pioneer Rancher to cut up some turkey Spam for our lunch sandwiches. Turkey Spam is yummy :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login