Show off your Sak mod's!
-
I'm new here so - hello everyone :) Greetings from Cracow, Poland!
I have a small problem with my SAK mod... I saw mods from Syph007, and I realy enjoy two openers in one layer with phillips... But, when i tried it, the spring from layer with philips and magnifying glass was to thin for 2 openers. How you solved that problem, 'couse I cannot find it...
And I forgive me my boldness, but I want to share with you my first mod:
Victorinox Ultimate
Assembled from Cybertool 34 and Swisschamp.
I know that philips is doubled, but i couldn't find the way to put two openers in one layer with magnifying glass.I hope you like it.
vol
-
Pretty nice looking mod there, vol7.
-
@Syph007 said:
A different sort of cellidor mod today. A user wanted a two layer mechanic with awl in place of phillips. I used the inner liner as an outer liner for the front side so the pliers rivet did not hit the scale. The awl needed a very tiny washer made for it as well, but it all worked out just fine.


is the washer needed for the proper snap? I've tried putting an awl there like that with no washer and the snap on the blade wasn't right...
-
-
Like your ultimate mod

-
First Alox mod. Explorer+Electrician+Pioneer Solo+Pioneer Harvester+handmade liners=Alox Explorer. (and a pile of leftovers)




-
@vol7 said:
I'm new here so - hello everyone :) Greetings from Cracow, Poland!I have a small problem with my SAK mod... I saw mods from Syph007, and I realy enjoy two openers in one layer with phillips... But, when i tried it, the spring from layer with philips and magnifying glass was to thin for 2 openers. How you solved that problem, 'couse I cannot find it...
Hi welcome! That mod I do with the openers uses two opener springs, that way each opener is sprung independantly, and the phillips needs washers on each side to sit tightly. I have not tried it on a 91mm SAK though, but it should work too, some reshaping might be needed for the springs.
-
-
This one will be pulled apart again and re-done as there is a couple of things I'm not happy with. The scissors don't have much snap so I may have to give that Solo spring a little bit of extra bend. Also need to re-profile the ramp on that spring so the scissors don't catch as they close.
But it was always done as a learning exercise and I have learned from it, so "job done". -
looks great PTRSAK
-
A compact voyager or maybe voyager compact? :D





-
What? You didn't make that in alox? For shame!
:PVery nice mod, as always. I've been running through this thread trying to get some inspiration for my first mod; I've all but ditched the Explorer w/ pliers and a combo tool idea (the combo and mag glass don't appeal much to me). I'm thinking perhaps an alox Executive now.
-
-
@vol7 said:
I'm new here so - hello everyone :) Greetings from Cracow, Poland!I have a small problem with my SAK mod... I saw mods from Syph007, and I realy enjoy two openers in one layer with phillips... But, when i tried it, the spring from layer with philips and magnifying glass was to thin for 2 openers. How you solved that problem, 'couse I cannot find it...
And I forgive me my boldness, but I want to share with you my first mod:
Victorinox Ultimate
..
Assembled from Cybertool 34 and Swisschamp.
I know that philips is doubled, but i couldn't find the way to put two openers in one layer with magnifying glass.I hope you like it.
vol
I do like it

And welcome to the forum.

-
Yep... that one was one of my favorites too! I will make one for my collection at some point!
You used a blade layer spring for the phillips layer, didn't you?
Yep, but now Id probably grind one of my custom springs down to use, so I didnt have to 'use up' another alox sak for the spring. I suppose a solo spring would be fine too if the other end was ground to the right shape.
-
Haha, I hear you. Using blade springs is like throwing knives out of the window. :D
-
Thanks for nice welcome!
I wonder, if I can switch small blade in 91mm SAK for a 93mm reamer (is that a right term for that thing where the small blade is in 91mm SAK?). Then customize 2 springs (syph007 you did something like that, didn't you?) from 93mm to fit in 91mm and put there 2 openners and magnifying glass...Does anyone have some spare parts:
- 2 springs from alox's openers layer
- magnifying glass (that grey, from witch you can take out the lens)
- alox "reamer"
vol
-
I did some painting today. :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


. Stax's, right?