Help with Leatherman TTi
-
Thanks for all your replies.
Defender, thats a bad deal you had there. So what happened in the end?
I suppose you could say I was lucky.
Tbh, like Leatherman123 said, its gonna be used anyway and it was bought for myself - not a present so I'm not that fussed. I have contacted the seller and this is what he replied:
all the handles have this "rough" finish for better grip. these tools are direct from leatherman. i do not sell used tools. look at my feedbacks. i do not have time to go buy used tools and sell them as new on ebay. if you are not happy with the tool, return it and i will refund your money less the shipping charge and ebay fees.
He seems reasonable. But as I said, I'm not that fussed (only scratches) and wanted to confirm with you guys that new TTi's are not like that out of the factory. As someone had suggested, it was probably an ex display model. All the tools look new and not used except the knife tip. So I have decided I'm going to keep it but will email him again with the pictures just to show him what he sent me. I'm a little disappointed, nothing more. But that'll teach me a lesson! :D
Btw, what does 'EDC' on this forum mean?
-
EDC= Every Day Carry. :)
-
Well regardless of it condition, you'll love the Charge :)
-
I just also noticed something else.
This was the ad on Ebay:• Charge TTi Multi Tool
• Leather Sheath
• 8 Double-End Bits
• Removable Pocket Clip
• Quick Release Lanyard RingPresentation Gift Tin Case
I got exactly what was shown in this pic. You can see that there are 6 double-end bits in the holder. But there's supposed to be 8 as advertised. What about the one in the TTi, is that to be included or not? Also the holder has holes for 10 bits in total. So whats going on??

-
Well my first Charge was a bit of a modded one, and the second one came in a clam shell :-, but I only got 6 bit's (plus the ones in the tool) with mine :)
-
I would say that they are counting all the bits and therefore the ones "loaded" into the tool as well. So that is right.
-
Defender, thats a bad deal you had there. So what happened in the end?
I left the guy bad feedback, and ended up with a crappy tool. I could have lodged a complaint through eBay and Paypal etc, but it just wasn't worth the effort.
Def
-
I have just received a reply back from the seller after emailing him the pics. This was his reply:
the scratches you have shown me are on the "titanium" part of the tool. i am looking at a few other titanium tools and they all have the same finish. they don't have the shiny finish as the stainless steel portion of the tool. i admit i don't inspect each tool before i sent them otherwise they will have my finger prints on them and people complain they have been handled. i guarantee i get these straight from the leatherman factory and they are brand new when they get to me. check my feedbacks, none of them accuse me of selling used tools. if some tools have more scratches than others, it is due to their normal manufacturing processes.
What you think? You guys are all wrong.....?! :)
-
Me thinks not. It may have not actually been used, but it has certainly been played with - the scratches on the blade show this.
-
Its a tricky one really. I dont think the seller is a liar, the tool could well be new (more like an ex display though). I've had a quite a few different tools from LM and the finishes on the metal are all different. I'm looking at a new Charge and it has slight little 'scratches' on if you point it at the light at the right angle (not as many as your tool shows) but scratches and blemishes on LM tools do not mean they have been used. I wouldn't worry about it buddy, you've highlighted it with the seller who has emailed you back, I would just enjoy using the LM Charge now, those little scratches shouldnt worry you at all. :)
-
@prime77 said:
Welcome the forum man.
My Charge AL and ALX were very stiff to open when I first got them. I used the movie/TV break in method. Watch a movie or TV and and open and close the pliers over and over again. It will break in faster and loosen it up alittle.I have been doing the above and on the serrated knife handle, it became more stiff with like a 'grating' movement. Looking at the pivot joint, there's alot of metal bits that must of come from it. The other pivot don't have this. This normal?

-
A couple of the hex bits in the first pic look a bit damaged aswell or is that just light and shadows?
Ive had my TTi for a year now and its used every day, every time I think its starting to look battered I just give it a clean and an oiling and it looks as good as the day I got it, far and away my favorite bit of kit, you wont regret the purchase anyway.
-
@weqr said:
I just also noticed something else.
This was the ad on Ebay:• Charge TTi Multi Tool
• Leather Sheath
• 8 Double-End Bits
• Removable Pocket Clip
• Quick Release Lanyard RingPresentation Gift Tin Case
I got exactly what was shown in this pic. You can see that there are 6 double-end bits in the holder. But there's supposed to be 8 as advertised. What about the one in the TTi, is that to be included or not? Also the holder has holes for 10 bits in total. So whats going on??

Mine has also 6 bits in the holder.
Eddie
-
Welcome the forum man.
My Charge AL and ALX were very stiff to open when I first got them. I used the movie/TV break in method. Watch a movie or TV and and open and close the pliers over and over again. It will break in faster and loosen it up alittle.I have been doing the above and on the serrated knife handle, it became more stiff with like a 'grating' movement. Looking at the pivot joint, there's alot of metal bits that must of come from it. The other pivot don't have this. This normal?
Uh.....no. Blow those shavings out of there, or use a toothbrush to clean them out. Then put a drop of sewing machine oil on that area (not WD40)
Then work the pivots some more and check if it is still shaving metal.
-
@J-sews said:
Uh.....no. Blow those shavings out of there, or use a toothbrush to clean them out. Then put a drop of sewing machine oil on that area (not WD40)Then work the pivots some more and check if it is still shaving metal.
Lol, did as you suggested, but more shavings were still been made. So obviously 2 surfaces are not wearing smoothly. Checked closely and suspected it was these 2 areas. The gooves in the green area were quite deep.

So I got out the old Dremel and tried my best to take out the grooves and a bit more. Was bit difficult as the area was small. Gave it a good clean and the action is now like it should be! :)
Here's the culprit with the jagged edge.
Hmm......maybe this TTi slipped passed LM's quality control??
-
It's really a factory defect.
-
Your really not having much luck are you mate :(, but good job on the clean up though :), should work like a dream now.
If you want to compare it to another Charge, I'll be bringing mine to the big UK meet in July...
/topic/3140
-
I just checked my TTi. Weqr, here are two pictures of my TTi taken at slightly different angles.
Eddie


-
It should be tight when you first get it,but it will loosen up over time,a lot of the marks are tool marks from machining, If my tools don't have scraps and scars on them,I probably don't need them.
-
Mine look like Eddies; untouched mostly but with a little shine at the point where it's almost fully open.
Nice job on the polishing weqr. Too bad you can't bevel that rough edge on the handle slightly. :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login