Silverline LM Crunch clone
-
@50ft-trad said:
You could choose to think LM ripped you off, or you choose just to think you got a humongous bargain with the Silverline :)Good thing is that I got mine from MTO for 40-50 bucks, so it doesn't hurt. :D And I'm a LM fanboy so it wouldn't matter anyway to get ripped.
But...if I'm just comparing these two as a tools, forgetting all brand/pirate-stuff - I could pay 5-10 bucks more for genuine one but that's it. Oh, there is some problems with Silverline clone which I have spotted now but let's get back to them later - to keep this thread alive. :D
-
@Grant Lamontagne said:
Does anyone know where to pick these up for US customers besides ordering from Amazon.co.uk with their crazy shipping charge?
Do what I did- buy it from a Brit who didn't care for it! :D
Def
anyone want to sell me one? Or buy one then ship it my way? I really do want one of these.
-
My Silverline Crunch clone arrived today. Excellent value for money at GBP 8.48, but shipping charges added a fair bit extra to the landed price (GBP 13.87 for 3).
The locking pliers grip strongly and it doesn't feel at all flimsy. The tips of the plier jaws are very well aligned.
The 1/4 hex bit driver is a bit loose for some bits (some can be shaken out, others hang in there).
It has a positive lock for the tools when in the open position.
The philips driver needed a slight bit of re-profiling on the tip (cue diamond file).
The adjustment screw for the width of the locking jaws is a bit loose.
The cutting blades in the pliers won't cut paper.
Overall I'd rate it as functional but not highly refined, but much better than other tools that I've paid similar money for.
-
I've had a couple of weeks use out of this tool now. I'm past the point of taking it easy on it in case it breaks and have been using the grips quite heavily.
I ended up on a very cold ferry dock in Belfast today and the pic below shows it holding some small bolts for cutting. Sadly the file was fairly useless for cleaning off the burr on the bolt and I had to fall back on my a surge file for that, but ultimately it's about clamping and its doing an admirable job

Sent from my iPad using Tapatalk HD
-
Good stuff Nelson.
Oddly enough I was just using my Jack Pyke branded one to strip down a tap and replace the washer (faucet to our American friends). Not even close to a heavy job but it's one of the first times I've felt the need to use it. -
Here it is on eBay for U.S seekers, ships from England. $27 though don't think it's worth it to me. Maybe someone else though.
-
Mine arrived in the mail today safe and sound. I have to say that while I have yet to use it for anything, it feels somewhat nicer than the Crunch. I do have to qualify that though- I have only got one Crunch and it was used when I bought it and the Silverline model is brand new. Therefore it feels nicer than a tool that has a fair number of miles on it.
The inner tools seem a little less solid than the Crunch ones, but overall, for the price this one seems quite nice. From what I've seen so far, I'd take one of these for anywhere under $20 and consider myself happy. For $27.... maybe, maybe not. Let me get some use under it and I'll report back.
Its amazing how closely they have managed to copy the Crunch though. If Silverline (or whomever the manufacturer is) can crank these out at less than $10 a pop and achieve 80-90% of a Leatherman, why can't Leatherman produce these and sell them for under $40? Given how good this is for how little money, I would find myself cautioning people about wasting money on a Leatherman.
Def
-
@Grant Lamontagne said:
Mine arrived in the mail today safe and sound. I have to say that while I have yet to use it for anything, it feels somewhat nicer than the Crunch. I do have to qualify that though- I have only got one Crunch and it was used when I bought it and the Silverline model is brand new. Therefore it feels nicer than a tool that has a fair number of miles on it.The inner tools seem a little less solid than the Crunch ones, but overall, for the price this one seems quite nice. From what I've seen so far, I'd take one of these for anywhere under $20 and consider myself happy. For $27.... maybe, maybe not. Let me get some use under it and I'll report back.
Its amazing how closely they have managed to copy the Crunch though. If Silverline (or whomever the manufacturer is) can crank these out at less than $10 a pop and achieve 80-90% of a Leatherman, why can't Leatherman produce these and sell them for under $40? Given how good this is for how little money, **I would find myself cautioning people about wasting money on a Leatherman.**Def
LOL

Be hopes you're not expecting an invite to Tim's garden party this year Def!!....Tim -->

As for the silverline clone - I'll echo your thoughts, I've got three scattered about, all get used and all still working!!
Can't say fairer than that

-
@Grant Lamontagne said:
Mine arrived in the mail today safe and sound. I have to say that while I have yet to use it for anything, it feels somewhat nicer than the Crunch. I do have to qualify that though- I have only got one Crunch and it was used when I bought it and the Silverline model is brand new. Therefore it feels nicer than a tool that has a fair number of miles on it.The inner tools seem a little less solid than the Crunch ones, but overall, for the price this one seems quite nice. From what I've seen so far, I'd take one of these for anywhere under $20 and consider myself happy. For $27.... maybe, maybe not. Let me get some use under it and I'll report back.
Its amazing how closely they have managed to copy the Crunch though. If Silverline (or whomever the manufacturer is) can crank these out at less than $10 a pop and achieve 80-90% of a Leatherman, why can't Leatherman produce these and sell them for under $40? Given how good this is for how little money, I would find myself cautioning people about wasting money on a Leatherman.
Def
Well,
To give a counter position: When you pay full fare for a Leatherman, you also are purchasing their warranty process. Seeing how I've sent back a Charge ALX twice and received good as new (and possibly brand new) tools, I would say that their price is a bargain.
I'm not a fan of the Crunch in general. Mainly because the tools aside from the locking pliers are really a compromise. I have to carry another MT to go with it. If I'm going to do that, I'd just as soon carry a small Vise-Grip with a MT and get the speed/convenience of the it.
BUT if I DID EDC a Crunch, I am sure I'd have broken it a few times by now. ::)
-
True, however, there is one thing that kind of offsets the warranty service, and that is the price. Depending on where you got it from you could get three to five Silverline tools.
I'm not suggesting people should buy this instead if a Leatherman as the Leatherman price includes the design process, which Silverline obviously isn't funding, but I do have to say that this is about as good as a copy can get. I'm really impressed with it.
Def
Sent from my Motorola Atrix digital multitool.
-
I'd seen the Silverline on Amazon for a couple of years and the price was what stopped me buying it, as a £10 multitool is almost guaranteed to be garbage. I only bought it eventually out of curiosity as I'd never handled a charge.
I think this thread has since boosted their image, its probanly the best of the cheap tools on here and as a gripping tool for the price it is excellent, but the Philips driver and File are just ballast.
-
Glad it got there safe Grant
My problem with it, was that is was a really excellent copy of a rather average and frustrating tool. The copy is excellent, especially considering the price. I just don't like the Crunch :-\ I much prefer the Schrades -
The PST clone was my first MT, I got it from Woolworths for about £3 including a sheath.
It sort of worked... it was very uncomfortable to use the pliers, the screwdrivers were on the wrong side of the pivot so when you lent on them they folded rather than pushing themselves in to the back stop and the steel that the blade was made out of was a joke. I had a basic tungsten carbide sharpener at the time and when you tried to sharpen it, you got little curls of steel coming off the blade like when you're planing wood.
However, it prompted me to buy a LM Kick and later a Wave so it's all good.
-
That's the divisor, isn't it? For some folks cheapo tools are a way to find out that having an array of tools with them is a good thing and they eventually trade up. For others the disappointment of starting with a cheap tool sours them on all multitools and they just don't feel the need to move ahead.
For others, cheap tools are just that- a cheap tool. The Silverline Crunch is perfect for those types- it's a handy, well made tool that probably won't let them down, at least not for the things it's meant for. As Al pointed out, it's a great copy of a very limited tool, but it is still a good tool in it's own right.
Def
-
Well, the original Crunch is indeed better than the Silverline, but certainly not 12 times better! :ahhh
Def
-
That's pretty much the maths I ended up with too. It's not very often the cheapo is better value than the big name brand, but I think this one definitely ticks that box
-
Houston, we have a problem. Silverlines cutters are not doing their job - there is too much flex and cutters will spread away from each other. Check out your - do I just have all bad apples or is it common problem?

-
@mtool78 said:
Houston, we have a problem. Silverlines cutters are not doing their job - there is too much flex and cutters will spread away from each other. Check out your - do I just have all bad apples or is it common problem?
You're right. Just tried them and they cut 2.5mm electrical wire fine, but they spread when I tried to cut a coat hangar wire and didn't cut it at all.
As a comparison the wingman didn't cut the coat hangar within my hands pain threshold and the charge, PPP and Diesel snipped it like it was nothing.



I mentioned before the file isn't up to much, the rest of the tools are good at the price, but to me this was always just a cheap foldable vise grip which it does admirably... still worth a tenner?
Sent from my iPad using Tapatalk HD
-
Yep - it's still a good too. I'm afraid there is not much to do with this problem, tightening does'nt help. It's a shame because material of pliers seems to be pretty good, I have really used a force to see if it will break but it really holds up well. I think that the file aint much worse than what the genuine Crunch has - it's just too short and pattern ain't too agressive.
1 of my 3 Silverlines has also a problem with the lock of tools - it doesnt hold. Other two are just fine, I guess the corner of that locking clip is just too rounded. Anyway, this tool is my edc at the moment, I used to carry Crunch but I want to see how will this clone make on long run.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login