Rusty MUT
-
Just tap water and left in my shop. Im sure if I didnt leave it wet it wouldnt have gone so fast, but i was trying to show how bad they rust on me.
I had a wave that was quite badly rusted, but that was because I left it in the sheath for a couple of months after using it in salsmurfer environment. I sprayed lubricant on a charge Tti which was the replacement for the wave before I EDC it couple of years ago, till now it has no rust problem. But I do spray it with stuff like RP7 or WD40 every now and then.
I was sure I typed " salsmurfer environment" 
what's salsmurfer ??? I typed salt water. 
-
@Styerman said:
I think if I needed a Multi for use around salt water , it would be a Clipdraw equipped Spirit , I'd just clip a Spyderco Salt in another pocket . I've never had a problem , did a lot of flyfishing around both fresh and salt . Freshwater rinsing is just part of the end of the day routine .Chris
Ahem... leatherman are you listening???? Spyderco has the H1 rust resistance salsmurfer blades. Why not a rust resistant multi tool? Call it the seabee or something.....
-
I think if I needed a Multi for use around salt water , it would be a Clipdraw equipped Spirit , I'd just clip a Spyderco Salt in another pocket . I've never had a problem , did a lot of flyfishing around both fresh and salt . Freshwater rinsing is just part of the end of the day routine .
Chris
Ahem... leatherman are you listening???? Spyderco has the H1 rust resistance salsmurfer blades. Why not a rust resistant multi tool?** Call it the seabee or something.....**
Or the spirit... :D
-
I spend most of the summer on the beach, so a couple of years ago I posted a thread asking if there were any special saltywater multitools for fishing and even carrying underwater.
Nothing came up.
There were some fishing tools but they were not made out to be any more rust resistant than normal tools.I carry a diving knife in the sea which is pretty salt resistant and used the Micra on the beach. I allways washed it after use, like I do with my diving knife.
It did rust and was pretty much stuck. I cleaned it after the summer and it is OK now.Also look at the CRKT MUK which is designed for boat/fishing use and the steel it is made from (from what I remember from a search I did) is rust resistant. Not a multitool but a multifunction knife.

-
And all them under the sea James Bond movies you see their knives all clean & shiny.

-
I love the MUK although at some point I'm going to have to vet a good sheath made. I'll probably see if Eric from On Scene will do a nice Kydex rig for it, at which point it may become my preferred kayak knife, possibly replacing my current favorite, the CRKT Neckolas.
Def
Sent from my Motorola Atrix digital multitool.
-
I got a leatherman wave around Christmas. The production date is 1112. And it had rust spots new out of the package. Leatherman offered me a "refurbished" tool. Are you serious refurbished?!? Mine is brand new!!! I do like it though. Since then I've ordered one in black oxide.
-
All my Leathermans rust like crazy, I carry a Skeletool CX and a custom D2 steel slipjoint at work, both in the same pocket. My slipjoint never has rust and it's not even considered stainless, the leatherman is covered in rust however. Thinking of getting a Victorinox Spirit for this very reason and ditching the Leatherman.
-
@FLYBYU said:
All my Leathermans rust like crazy, I carry a Skeletool CX and a custom D2 steel slipjoint at work, both in the same pocket. My slipjoint never has rust and it's not even considered stainless, the leatherman is covered in rust however. Thinking of getting a Victorinox Spirit for this very reason and ditching the Leatherman.That's interesting, ive been thinking of making SAK blades from D2, and wondered how stainless it would be, since its not 'stainless' per say.
Vic spirit x is the way to go if you want to take the Vic plunge. I have 5 now. :D
-
My queen in D2 does not rust as such, but the blade has dark stains on it from possibly cutting a lemon and some onions.
Definitely a lot better than 1095 or even O1 steel but not SS.
-
It’s the finish. That bead blasted finish seems to be a rust magnet. The old brushed finish worked better, I think.
I have an old Original Supertool and it has the brushed finish. It resides in the junk drawer and it’s been to heck and back over the years. I’ve used it for yard work where it got gobs of wet dirt in it from pulling saplings. It’s gotten auto grease & dirt, paint, glue, epoxy, drywall gunk, and caulk on it. I’ve used it to replace bathroom faucet seals and pull gunky things out of the drains. It’s been left in unheated/unisulated garages, tossed in the trunks of cars, and accidently left outside on the patio once. All of that and no rust.
But these new bead blasted LMs don’t seem up to the task.
-
The Wingman isn't bead blasted and mine looks AWFUL.
Def
Sent from my Motorola Atrix digital multitool.
-
No problem. It was speculated earlier that a cheaper steel was used in the Wingman and maybe that was why it rusted.
Def
Sent from my Motorola Atrix digital multitool.
-
Just to follow up on this a little bit, I snapped these photos of some new cars the other day at work to show how corrosive the environment is here. These cars have been sitting for about twelve hours when these photos were taken. Of course the rotors would have been clean when they were driven off the ship 12 hours earlier.
Def
Sent from my Motorola Atrix digital multitool.


-
Grant has the curse of the rust, not the most ideal curse for people who like multitools. :)
-
Or anything made of metal, really. This is why I don't believe Superman has ever been to Nova Scotia. You think Kryptonite is bad, he'd rust away in moments here!
def
-
@Grant Lamontagne said:
Or anything made of metal, really. This is why I don't believe Superman has ever been to Nova Scotia. You think Kryptonite is bad, he'd rust away in moments here!def
Believe it or not, car dealerships down at the Jersey shore suffer the same problem. At least watching cars rust is far better than watching the local drunken obnoxious sluts try to be the next Snookie :ahhh
-
Yeah, I believe it since geographically you aren't too far away from me.
If I had all those sluts looking to be the next Snookie I'd probably start holding try-outs. Once you get to a certain age there's no such thing as a "bad touch." :D
Def
Sent from my Motorola Atrix digital multitool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
