Hints and Tips thread.
-
Wire stripping. Open the driver and main blade.

Insert wire into notch and close driver.

Close main blade

Rotate Sak around wire a few times
While holding Sak pull out the wire.

-
Nice. What if the distance between the wire stripper and blade is 1km (approximately)? We need a Swischamp methodology too.
But for slim SAKs that's very nice indeed. -
That's brilliant - I had never figured that out at all!

-
Very clever.

Thanks for the info. -
Not sure why any newer knife would use a bail. It seems like a completely outdated idea.
Retro is the new, new thing.
And IMO the main reason the put a keyring on now is because it's cheaper to make.
Besides, a bail is much more comfortable in your pocket.
i would say more comfortable in hand too.
-
Split ring open an hold

-
The can opener is pretty handy for removing staples as well.
-
Bit driver

Orange Peeler

Corkscrew Pen

Package Hook Pen

Mini-Driver Compass

Knife Compass - Can Opener magnetized with north polarity, bottle popper magnetized with south polarity, suspend via a thread or cord. It works, believe it or not.

-
This improvised use too is covered in The Swiss Army Knife Owner's Manual:
"Test this out before you leave home and make sure which end of your knife points North. Engrave a simple arrow on the scale, or an N on a tool of the North end. How to magnetize a whole knife? Readers?"
The above SAK crossbow photo by the way is from the same book - "Not an owner's manual originating with the manufacturer." Note the glove for safe firing. -
One can adapt a 6mm Hex bit adaptor for use with the Philips screwdriver. It works for both the old (blue) and new (red) types of drivers. You just fill the tube with some elastic material, rubber or foam, and then stick the driver inside. Now you can use any 6mm bit.
I'm still researching for a way to use X-Akto blades, preferably with a thin SAK (Cadet, Spartan, Climber etc).

-
I was wondering if the old combo tool I got here is actually worn down at the tip of they really changed the design over the years. ::)

-
Two different designs.
-
@kkokkolis said:
One can adapt a 6mm Hex bit adaptor for use with the Philips screwdriver. It works for both the old (blue) and new (red) types of drivers. You just fill the tube with some elastic material, rubber or foam, and then stick the driver inside. Now you can use any 6mm bit.
I'm still researching for a way to use X-Akto blades, preferably with a thin SAK (Cadet, Spartan, Climber etc).wonder if the leatherman adapter would work. Have you had any problem with the foam or other material breaking up ? great idea

-
No, not yet. I took the foam from a cheap plastic pen. The rest of the foam is used as a container for 3 cybertool's bits. I have a slight play and I'll keep my eyes open for a more dense material but it works as it is. In fact the XLT doesn't need this adaptor (I have 7 double bits already) but it would be highly functional for a Swisschamp or a smaller SAK with inline Philips.
I wonder too about that Leatherman adaptor. A full Bitset costs 35€ here and it would be easy to buy it if I could justify using it somehow with a SAK. -
@kkokkolis said:
No, not yet. I took the foam from a cheap plastic pen. The rest of the foam is used as a container for 3 cybertool's bits. I have a slight play and I'll keep my eyes open for a more dense material but it works as it is. In fact the XLT doesn't need this adaptor (I have 7 double bits already) but it would be highly functional for a Swisschamp or a smaller SAK with inline Philips.
I wonder too about that Leatherman adaptor. A full Bitset costs 35€ here and it would be easy to buy it if I could justify using it somehow with a SAK.I will try it when I get home and let you know.
-
Thanks.
-
@kkokkolis said:
Thanks.Well no go on the bit adapter, or any of the Gerbers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


