Appreciation for the Explorer
-
@Heinz Doofenshmirtz said:
I'm fond of the Explorer myself. For my needs, my Yeoman is a more economical choice, but I understand the benefit of the full sized Explorer. The next two mods I'm planning on doing are both going to be based on Explorers in fact. One with a saw, to make a Woodsman, and another with pliers.I'm about to make a woodsman too! I have a junky explorer I got for cheap so I'm going to put the mag/philips layer in a huntsman I just got from Lowtech. The only thing I can't decide is whether I want stayglow or plus scales. This decision is tearing me apart! It isn't hard because of choosing between the glowing or the pen, I just can't decide between the colors!

-
@sawman said:
Is it just me or does anyone else find the Explorer to have the perfect balance of tools and just the right amount of layers for EDC? I think it's the perfect SAK.Right on. I own dozens of SAKs, and can't stop buying them. I ordered an Executive today. But my years of buying and hoarding and carrying on a daily basis have resulted in the Explorer Plus rising to the top. I try to downsize to 2 or 3 layers at 91mm, or down to 58mm, and those are great, but I always end up back with the Explorer Plus. The real kicker for me is the phillips that folds out 180 degrees like God intended. I have them in red, yellow and sapphire. But for me, they are the right convergence of size/weight vs. utility.


-
-
Explorers are awesome, but I really do miss the old style mag glass. I like the newer phillips driver better, but definitely prefer the older mag glass. An explorer with plus scales would cover most of my daily needs. I still EDC a cybertool 34 but honestly the pliers have not been used yet, but i keep thinking sometime I'll need them, so an explorer would suffice.
-
@Syph007 said:
Explorers are awesome, but I really do miss the old style mag glass. I like the newer phillips driver better, but definitely prefer the older mag glass. An explorer with plus scales would cover most of my daily needs. I still EDC a cybertool 34 but honestly the pliers have not been used yet, but i keep thinking sometime I'll need them, so an explorer would suffice.What makes you prefer the old mag glass and the new philips?
Isn't the new philips just shorter than the older one?
-
The Magnifying Glass was first introduced in 1973 and featured a glass lens with a Grey plastic housing. In 2007 the Magnifier was changed to a new model with a transparent plastic housing and a plastic lens. The 2007 magnifier has a slightly lower level of magnification, and a slightly wider area of view due to the slimmer housing and lower magnification.
-
Well yes, I know the difference.. just wondering what he preferred about the older one.
(as well as the newer philips) -
The steel on the new phillips is better. The old ones you can damage the lugs way easier. So I like the newer one for that reason, more durable. Longer would be nice, but I pick steel over length.
-
Nice set of tools, powernoodle. But why the nailclippers when you have the SAK scissors? And what do you do with the marker?
-
@Heinz Doofenshmirtz said:
I'm fond of the Explorer myself. For my needs, my Yeoman is a more economical choice, but I understand the benefit of the full sized Explorer. The next two mods I'm planning on doing are both going to be based on Explorers in fact. One with a saw, to make a Woodsman, and another with pliers.
I'm about to make a woodsman too! I have a junky explorer I got for cheap so I'm going to put the mag/philips layer in a huntsman I just got from Lowtech. The only thing I can't decide is whether I want stayglow or plus scales. This decision is tearing me apart! It isn't hard because of choosing between the glowing or the pen, I just can't decide between the colors!

I'd go with the plus scales myself. I've probably only used the pen that comes with them less than a handful of times, but it's still nice to have. But, I think the most important consideration is what your intended use is going to be. If you're going to make a Woodsman and then squirrel it away in a backpack or BOB, then I'd say the stay-glow is the better choice, because it'll help you find it when you really need it. On the other hand, if you're planning on doing it for EDC, then I'd say go with the plus scales. Personally, I'd make a Woodsman with stay-glow, and an Explorer +pliers (still not sure what I'd call it, been thinking "Machinist" would be a good name) for EDC use with plus scales. But, that's just me. YMMV of course.

-
The Explorer is one of my two favorite SAK's, the other one being the Swisschamp 8).


-
@Heinz Doofenshmirtz said:
I'm fond of the Explorer myself. For my needs, my Yeoman is a more economical choice, but I understand the benefit of the full sized Explorer. The next two mods I'm planning on doing are both going to be based on Explorers in fact. One with a saw, to make a Woodsman, and another with pliers.Are you keeping the scissors on the planned pliers mod or taking them off?
-
I love the Explorer but have a hard time with pocket carry as the four layers make it tough so I normally carry the Super Tinker instead. I wish I could get by that and maybe if I carried it more, I would get used to it. It has the tools I need as I really use the mag glass quite often.
Maybe I need a custom with the opener layer, blade and mag. glass/inline philips! That would get me to three layers!

-
-
@Northern Geek said:
Well yes, I know the difference.. just wondering what he preferred about the older one.
(as well as the newer philips)Didn't know that, thanks.

Now if we could just get them to make a longer one with that steel..

-
@Northern Geek said:
@Northern Geek said:
Well yes, I know the difference.. just wondering what he preferred about the older one.
(as well as the newer philips)Didn't know that, thanks.

Now if we could just get them to make a longer one with that steel..

Unfortunately I don't think that can happen. The new magnifying glass and light are larger so the philips had to get smaller to fit them.
-
i use the old style on my mods because i like the extra length and haven't had any problems with the steel being too soft.
I've used mine pretty heavy too, not disagreeing but I'd almost think the brass pin on that side would have problems before you could torq so hard to mess up the phillips steel...
-
-
Those are old Belgian World War I trenches, where they replaced the original sandbags with concrete ones. They are called "trenches of death" near the cities of Diksmuide and Ieper (famous World War I places).
You can read more about that (and some other World War I sites in Belgium) here.
-
@Heinz Doofenshmirtz said:
I'm fond of the Explorer myself. For my needs, my Yeoman is a more economical choice, but I understand the benefit of the full sized Explorer. The next two mods I'm planning on doing are both going to be based on Explorers in fact. One with a saw, to make a Woodsman, and another with pliers.
Are you keeping the scissors on the planned pliers mod or taking them off?
I'm planning on keeping the scissors in both mods I want to do. I'm actually planning on using a Swiss Champ for each, and paring them down to make the aforementioned mods.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login