What did you use your Sak on today?
-
I adjusted the dishwasher so the door didn't rub the surround. Its been rubbing and squeaking for 8 weeks, and it took 2 minutes to fix with the phillips on my Explorer Plus.
-
Early this morning used the can opener screwdriver end to push & guide a coil spring back into the end of its handle of an older caliper. Also cleaned the caliper of old grease, followed by oiling the moving areas. The back L part of the can opener I pressed down and into crevices. Pulling it backwards removed some old grease around the knurled & threaded areas.
After taking a shower was time to trim the big toe nails. One nail side broke off in the process of pulling it out. :ahhh Wenger SI's awl helped me lift up the stubby nail trimming just enough to grab it with the Leatherman PST. Toes sure feel better. Always use the PST for nail trimming duty as they get into tight areas and have great gripping ridges.
-
Coincidentally, I trimmed my toenails today also, but I used my Climber Plus

-
Used the bottle opener on my Explorer to pop open a Sam Adams

Wrong thread


I don't think it qualified for the thread you are probably referencing as I only had a couple. Sam Adams is the type of beer I like to just take my time and enjoy the flavor

-
Used the bottle opener on my Explorer to pop open a Sam Adams

Wrong thread


I don't think it qualified for the thread you are probably referencing as I only had a couple. Sam Adams is the type of beer I like to just take my time and enjoy the flavor

I could go for a nice cold oil can (or two) of Foster's right about now.

-
@Xelkos said:
Used the bottle opener on my Explorer to pop open a Sam Adams

Wrong thread


I don't think it qualified for the thread you are probably referencing as I only had a couple. Sam Adams is the type of beer I like to just take my time and enjoy the flavor

I could go for a nice cold oil can (or two) of Foster's right about now.

I haven't had Foster's in ages. Those are some big cans o' beer

-
Used the pen on my Compact to cross items off the list while grocery shopping earlier.

-
Yesterday, I used my Super Tinker to open up a package that should up containing my new Juice C2 in red! :D
-
Used the large blade on my electrician to scrape and cut away some spray foam insulation. FYI never mix untrained family members and home repair. Lesson learned.
-
My wife used the scissors on the Compact, and I used the scissors on the Explorer to cut tags, plastic ties and tape from various baby clothing and items she received today at her baby shower. I love the Vic scissors.
-
Used the package hook to pull a single cord through two lanyard knots. Might have to do it again, as found some orange cord at Home Depot for a few dollars. Of course the knife was used to cut the cord lengths. And my Zippo for melting the ends. :D
Am sure AHB showed you his Zippo too.

-
Finding the corkscrew to help adjust and tighten that lanyard knot. Slip in under a segment, rotate it a turn, then pull. Works great! :D
Spartan was used on a simple friendship lanyard.
-
Used the blade to cut many pieces of duct tape to do a temporary waterproofing repair on the door of my better half's car where someone ran into her on a round-a-bout.

-
she's fine. we drive on the other side of the road here (left) so this is the passenger side.
-
Yikes! Is the passenger okay then? Sorry... forgot y'all drive like my aunt does over here.
-
Mouse wheel was misbehaving. Took it apart, and just realizing when typing this out that had forgotten having a Phillips driver on the S557.
Anyhow some hair & dust somehow got inside over the past 5+ years.
Cleaned that mess out and adjusted the wire clip the mouse nubs roll over on. So used the pliers for something real finally. Wished the pliers met with more precision, as the heel-end of the plier jaws make contact first. Could not use the pliers for pulling the hairy rat's nest out.Did use the awl to poke another hole in my belt. Took a lot of pressure and ended up breaking the leather on the other side. So used the Climber to clean the hole up, much better. Not sure what the purpose of a dull square nail does for an awl ... so took the Spyderco TASM out and used the square grooves to sharpen the four corner edges. Should work a lot better now.
-
Used the Pioneer's knife to cut a couple threads off my daughter's coat. The one thing I feel that's really missing from my Pioneer (and Alox models in general) is scissors. However, I'm finding that a knife blade does a lot of what I actually use SAK scissors for. The only thing I could see needing scissors for is cutting paper, and I will have my new Micra to handle that task (once it arrives). I have found the scissors to be one of the tools I use the most, but I really wonder just how much I need them, or if a knife blade is really all I need.
-
Tried out the 84mm combo tool on can opener duties whilst making chili yesterday. Opened seven cans pretty darn easily - was quite surprised!
I like the combo tool much better than the dual openers. Saves a layer, and works better than the dedicated bottle opener for beer opening (it's primary usage for me :D ). Only thing I miss is the phillips-ability of the can opener.
Kind of thinking about getting a Lumberjack. Are the 84mm saws useful at all, or too short to be of real use?
@Monrogue said:
Used the Pioneer's knife to cut a couple threads off my daughter's coat. The one thing I feel that's really missing from my Pioneer (and Alox models in general) is scissors. However, I'm finding that a knife blade does a lot of what I actually use SAK scissors for. The only thing I could see needing scissors for is cutting paper, and I will have my new Micra to handle that task (once it arrives). I have found the scissors to be one of the tools I use the most, but I really wonder just how much I need them, or if a knife blade is really all I need.I haven't been carrying a SAK with scissors or my Micra at all in the past few weeks.
I have to say, I don't really miss them at all. A properly sharpened blade does almost everything that scissors do.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login