Appreciation for the Explorer
-
The Explorer is one of my two favorite SAK's, the other one being the Swisschamp 8).


good pics
...Beautiful!

-
I'll check in before this dies. I'm new here but I've had a Vic SAK in my pocket for about 40 years. The Explorer has the perfect tool set for me. I prefer two blades to one and I like the "real" openers better than the combo tool. Unfortunately I find 4 layers a bit too thick most of the time. Hence, my carry knife since 1996 has been a Yeoman and before that a Scientist.
Someone back a page or two asked about which was better between the old gray/glass mag and new clear plastic version. My Yeoman has a small scratch and 3 or 4 little pits on the mag gleass after carry for good while. I can only imagine what a plastic one would look like by now. Slightly less magnification might make it more versatile but surely the plastic construction more short lived. Another product enhancement!
-
Great thread steve!! The explorer is probably my favorite SAK. I carry mine every day all day. I love the toolset and I find that my explorer plus covers most of my needs to the point that in dont really need my leatherman all the time. I have considered dropping the pliers based tool out of edc just to see if I'd miss it. I rarely need it at home and at work I have a whole toolbox at my fingertips.
Sent from my Galaxy S3 using crapatalk two point oh.
-
@stot said:
I'll check in before this dies. I'm new here but I've had a Vic SAK in my pocket for about 40 years. The Explorer has the perfect tool set for me. I prefer two blades to one and I like the "real" openers better than the combo tool. Unfortunately I find 4 layers a bit too thick most of the time. Hence, my carry knife since 1996 has been a Yeoman and before that a Scientist.Same story for me (except the 40 years part) in that the Explorer is nearly perfect for me, with the exception of the 4 layer thickness. I find it doable, but not ideal. I think 3 layers is my max, and a Yeoman would be perfect for me. I have the Compact as well, and the Yeoman is just adding the magnifier/phillips layer to it. I would like to have my Compact and Explorer modded to create a Yeoman as they are just about impossible to find nowadays.
-
Well, it isn't available in my country, but that doesn't mean I don't like it. I think what it misses from being perfect is a light, but thinking I can get that externally(although I would like having EVERYTHING I need in a single SAK(magnifier, LED, Phillips, openers/combo tool, scissors, pen optionally small blade) that is impossible, but Yeoman and Explorer get VERY close, alongside Cybertool Lite(cheaper one of the two SAKs that have both the LED and the magnifier, the other being swisschamp XAVT- Vic's largest SAK yet.)
-
After years of hoarding it unused, I pulled out of my arsenal today a Swissbianco Yeoman Plus wearing yellow scales. Completely shiny and virginous. I can't remember why I was not using it, so now its my new EDC. As much as like the Explorer, the Yeoman is 3 layers, combines the Explorer's can and bottle openers into the one multi purpose tool, and loses the small blade and awl. Its even more awesomer than the Explorer, though of course I can't be completely satisfied and would like to see an awl instead of the hook. But overall it provides the functionality of the Explorer Plus but at 3 layers. Why on earth Victorinox does not mass produce this flavor is beyond me.

-
@powernoodle said:
Why on earth Victorinox does not mass produce this flavor is beyond me.Because then people would only buy a yeoman, instead of an explorer and a compact! :D
-
Thats 100% true, Syph.
-
Syph is correct and it aggravates me that I can't have a Yeoman without having someone make it for me. The Compact is near perfect for me, as is the Explorer, so naturally the Yeoman would be my ideal SAK. It's just frustrating that I can't simply buy one.
-
@Monrogue said:
Syph is correct and it aggravates me that I can't have a Yeoman without having someone make it for me. The Compact is near perfect for me, as is the Explorer, so naturally the Yeoman would be my ideal SAK. It's just frustrating that I can't simply buy one.I watched two Yeomans sell on EBay in the last month, so they're around. It would be more fun to make one. I tore down a tinker and used the phillips to make an apprentice.(Baby steps) Next I'll remove some bent scissors from an Explorer to make my Passenger. This might be as good a carry knife as the Yeoman. I plan to carry one for a while and see how much I miss the scissors. If all that goes well I'll turn my Compact into a Scientist. I carried one years ago and liked it. I picked up a couple of new Scientists 10 or so years ago but they seem to be so valuable on Ebay now I think I make one for my own use. It wouldn't be as much fun if you could just go down to the store and buy one?
-
Syph is correct and it aggravates me that I can't have a Yeoman without having someone make it for me. The Compact is near perfect for me, as is the Explorer, so naturally the Yeoman would be my ideal SAK. It's just frustrating that I can't simply buy one.
I watched two Yeomans sell on EBay in the last month, so they're around. It would be more fun to make one. I tore down a tinker and used the phillips to make an apprentice.(Baby steps) Next I'll remove some bent scissors from an Explorer to make my Passenger. This might be as good a carry knife as the Yeoman. I plan to carry one for a while and see how much I miss the scissors. If all that goes well I'll turn my Compact into a Scientist. I carried one years ago and liked it. I picked up a couple of new Scientists 10 or so years ago but they seem to be so valuable on Ebay now I think I make one for my own use. It wouldn't be as much fun if you could just go down to the store and buy one?
I watch ebay as often as I can, but I have never seen one. Any time I've used "Yeoman" as my search, I don't get any actual Yeomans. I know the search and anticipation, etc. is fun, but I don't have enough time or money to spend searching/getting one. I also can't mod either, which is something I would love to get into eventually, when I can afford the necessary equipment, and find space for it. If I could mod, then I could make one myself from my Compact and Explorer. If I was brave, I would attempt to take them apart, but I don't want to risk ruining them in the process, and it doesn't help that I really wouldn't know what I was doing ::)
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?"When the only tool you have is a hammer, every problem starts to look like a nail" :D
You really do not need much tools or space to get started. Check out the Mod Squad for everything you need to know.
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?**"When the only tool you have is a hammer, every problem starts to look like a nail" ** :D
You really do not need much tools or space to get started. Check out the Mod Squad for everything you need to know.
Love that line
Thanks for the suggestion 
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?My Yeoman was my first, and so far only, mod. I'm planning on making more though.

I didn't have any special equipment, and found I only needed a very minor investment in tools. I already had a bench vise with an anvil on it, so if you don't have something like that, I think it would be a good idea to get one, though you could probably do without it. I also bought a center punch for making divots in the ends of the pins to help with drilling them out, and a set of small pin punches for knocking out the pins once I had drilled the peen out of the bushing. I used a hand-drill, and I'm sure I could have gotten better results if I had a drill-press, but it wasn't necessary. I also bought a small jeweler's hammer to use for peening the new pins.
I took apart a Compact and an old Explorer to make my Yeoman. While I did end up mismatching the blade and the side plate when I put it back together (there's an annoying bit of side to side play in the blade as a result), it was a very enlightening and rewarding experience.
Definitely took me out of my comfort zone, and really forced me to think back and remember what I learned in a semester of machine shop in high school. But, I'm glad I did it, and am looking forward to making more mods in the future, once I can afford to buy appropriate donors. 
-
@Santos said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.
i agree. for what you'd end up paying for a real yeoman it just doesn't to make sense to use it as edc when you can buy a used explorer and a bantam. I feel terrible tearing apart a perfectly good compact just for the combo tool and suggest the using the bantams.
there really aren't that many tools needed to do these mods. the sticky threads on the top of the mod section do a great job explaining it.
-
We started out loving Explorers and now we're tearing them apart to make stuff out of them. I guess that's still loving em.
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

i agree. for what you'd end up paying for a real yeoman it just doesn't to make sense to use it as edc when you can buy a used explorer and a bantam. I feel terrible tearing apart a perfectly good compact just for the combo tool and suggest the using the bantams.
there really aren't that many tools needed to do these mods. the sticky threads on the top of the mod section do a great job explaining it.
Oh...I was under the impression that the Yeoman was basically a Compact with the mag/phillips layer added. I was hoping to just remove that layer from my Explorer and add it to my Compact. I'm probably severely over-simplifying it though

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login