Appreciation for the Explorer
-
@Santos said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.
i agree. for what you'd end up paying for a real yeoman it just doesn't to make sense to use it as edc when you can buy a used explorer and a bantam. I feel terrible tearing apart a perfectly good compact just for the combo tool and suggest the using the bantams.
there really aren't that many tools needed to do these mods. the sticky threads on the top of the mod section do a great job explaining it.
-
We started out loving Explorers and now we're tearing them apart to make stuff out of them. I guess that's still loving em.
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

i agree. for what you'd end up paying for a real yeoman it just doesn't to make sense to use it as edc when you can buy a used explorer and a bantam. I feel terrible tearing apart a perfectly good compact just for the combo tool and suggest the using the bantams.
there really aren't that many tools needed to do these mods. the sticky threads on the top of the mod section do a great job explaining it.
Oh...I was under the impression that the Yeoman was basically a Compact with the mag/phillips layer added. I was hoping to just remove that layer from my Explorer and add it to my Compact. I'm probably severely over-simplifying it though

-
@Heinz Doofenshmirtz said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?My Yeoman was my first, and so far only, mod. I'm planning on making more though.

I didn't have any special equipment, and found I only needed a very minor investment in tools. I already had a bench vise with an anvil on it, so if you don't have something like that, I think it would be a good idea to get one, though you could probably do without it. I also bought a center punch for making divots in the ends of the pins to help with drilling them out, and a set of small pin punches for knocking out the pins once I had drilled the peen out of the bushing. I used a hand-drill, and I'm sure I could have gotten better results if I had a drill-press, but it wasn't necessary. I also bought a small jeweler's hammer to use for peening the new pins.
I took apart a Compact and an old Explorer to make my Yeoman. While I did end up mismatching the blade and the side plate when I put it back together (there's an annoying bit of side to side play in the blade as a result), it was a very enlightening and rewarding experience.
Definitely took me out of my comfort zone, and really forced me to think back and remember what I learned in a semester of machine shop in high school. But, I'm glad I did it, and am looking forward to making more mods in the future, once I can afford to buy appropriate donors. 
Good to hear all of this. I have an explorer and Bantam for possible modding uses.
I have been drooling over a Yeoman.
We are basically neighbors.
:DIn all seriousness i'm not ready to donate my Explorer to be torn down right now, but I am planning on buying another when I get the money and using the existing Explorer as Mod material. If your interested then we should talk.

-
@stot ^ lol, good point. I believe it is still showing them respect by giving them new lives. It's similar to art that deconstructs different art and reuses it in new ways.
airports and the internet have really changed the game in how these little guys can get around.
Monrogue, I would say we are really just taking about model semantics, don't be worried. I believe technically the yeoman to be an explorer with one less layer. Yes you get the same thing adding a phillips/mag layer to compact, except you'd have the hook with file that the compacts have. The original yeomans don't have that.
My point is save that awesome compact and use it for what it is (great 2 layer knife) and sacrifice a bantam, which you can find cheap.
yes the nail nick sits a little lower. again nothing that would make me personally want to use a compact over a bantam for it.
opinions may differ
-
@WiSAKfan said:
@stot ^ lol, good point. I believe it is still showing them respect by giving them new lives. It's similar to art that deconstructs different art and reuses it in new ways.airports and the internet have really changed the game in how these little guys can get around.
Monrogue, I would say we are really just taking about model semantics, don't be worried. I believe technically the yeoman to be an explorer with one less layer. Yes you get the same thing adding a phillips/mag layer to compact, except you'd have the hook with file that the compacts have. The original yeomans don't have that.
My point is save that awesome compact and use it for what it is (great 2 layer knife) and sacrifice a bantam, which you can find cheap.
yes the nail nick sits a little lower. again nothing that would make me personally want to use a compact over a bantam for it.
opinions may differ
Oh I see :) I like that hook with the file actually. I love the Compact as it's nearly perfect, but it lacks any sort of phillips screwdriver, and I love the mag glass as it's both fun and useful. If I could just get that mag/phillips layer on my Compact, I would quite possibly have my ideal SAK. One can dream
:D -
Here is what I normally carry instead of my Explorer. I love that it has the inline Philips and mag glass like the Explorer, but with Pliers and Awl. I'm thinking I am going to start carrying the Explorer for a while though.



-
If you put scissors on that Soldier instead of the pliers, then that would be the perfect one for me!

-
@captain spaulding said:
Here is what I normally carry instead of my Explorer. I love that it has the inline Philips and mag glass like the Explorer, but with Pliers and Awl. I'm thinking I am going to start carrying the Explorer for a while though.


Is that Alox SAK modded? That's a pretty neat combo of tools. My ideal Alox would be the knife/awl layer-scissors layer-mag glass layer with both openers fit side by side at the other end.
-
I wouldn't call it a Soldier, but I do agree scissors would be great. I honestly love the size of it as is though.
-
I am considering a Climber Plus 1 layer model for EDC as a lighter pocketable alternative to my XLT and more capable in an urban setting that what I now have. I am puzzled about the 4th layer and currently I am inclined to a Mountaineer. Explorer's Philips can be substituted by the Can Opener's driver or the File's tip for smaller screws. The lens is useful but not every day need. The File's tip removes staples and can be magnetized I guess for tiny screws fishing. The file does manicure (the old type is preferred here) and together with the saw are useful for work on plastic (all around in the town) and also for metal and even wood. But I didn't make up my mind yet.
Are there any other suggestions for the "best" 4th layer option? I guess the 3rd layer is scissors (and hook) for a great majority of us, that's what Mods usually do anyway. -
@captain spaulding said:
@Heinz Doofenshmirtz said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?My Yeoman was my first, and so far only, mod. I'm planning on making more though.

I didn't have any special equipment, and found I only needed a very minor investment in tools. I already had a bench vise with an anvil on it, so if you don't have something like that, I think it would be a good idea to get one, though you could probably do without it. I also bought a center punch for making divots in the ends of the pins to help with drilling them out, and a set of small pin punches for knocking out the pins once I had drilled the peen out of the bushing. I used a hand-drill, and I'm sure I could have gotten better results if I had a drill-press, but it wasn't necessary. I also bought a small jeweler's hammer to use for peening the new pins.
I took apart a Compact and an old Explorer to make my Yeoman. While I did end up mismatching the blade and the side plate when I put it back together (there's an annoying bit of side to side play in the blade as a result), it was a very enlightening and rewarding experience.
Definitely took me out of my comfort zone, and really forced me to think back and remember what I learned in a semester of machine shop in high school. But, I'm glad I did it, and am looking forward to making more mods in the future, once I can afford to buy appropriate donors. 
Good to hear all of this. I have an explorer and Bantam for possible modding uses.
I have been drooling over a Yeoman.
We are basically neighbors.
:DIn all seriousness i'm not ready to donate my Explorer to be torn down right now, but I am planning on buying another when I get the money and using the existing Explorer as Mod material. If your interested then we should talk.

Just let me know! :) As a rough guesstimate, I'd say it'd take an afternoon to do it all from the beginning; taking apart the donors, setting new pins, doing the assembly, and pinning it all back together and putting scales on. I'm sure someone more accomplished than I at modding could do it in a fraction of the time, but now that I've already done one, I've got a pretty good idea of how to streamline the process.
-
Perfect 4-layer you say? A Spartan Lite plus scissors and a magnifier instead of the phillips(a LED addict I am).
-
@captain spaulding said:
Is that Alox SAK modded? That's a pretty neat combo of tools. My ideal Alox would be the knife/awl layer-scissors layer-mag glass layer with both openers fit side by side at the other end.
Yes it is a Mod by Steve. It is honestly in the top 3 of my favorite SAK's I own.

Cool
I really want to have an alox mod done, but it isn't a cheap job, so it's gotta wait for now :( -
In keeping with the spirit of appreciating the Explorer, I put it to some use yesterday. We were putting up a new curtain rod in our bedroom. I used the awl to start the screw holes for each bracket. The brackets were screwed in with a power drill screwdriver bit, but given the angle of approach due to the bracket design, that would only get them so far. Out comes the Explorer's phillips to finish the job :) I will say that the backspring phillips wouldn't have worked on this task, so that's another +1 for the inline phillips.
That's the great thing about the Explorer. It has just about anything you would need on a daily basis for a variety of tasks.

-
I'm going to post this one again, just because I like it.


-
Very nice that one..

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
