What do we have on the way?
-
@50ft-trad said:
As I feared! Cheap lightweight junk made to look like the genuine article.
No proper metal drawer runners as photos, just wooden lats. Drawer bottoms are hardboard stapled in position. Utter scam!To be honest it would probably suffice for my needs though, if I can get enough of a discount/refund

Let the games begin

damn. >:( You do at least have a good argument that it's not what was advertised, with the pic obviously not being the same as the actual thing.
-
@50ft-trad said:
As I feared! Cheap lightweight junk made to look like the genuine article.
No proper metal drawer runners as photos, just wooden lats. Drawer bottoms are hardboard stapled in position. Utter scam!To be honest it would probably suffice for my needs though, if I can get enough of a discount/refund

Let the games begin

:P
...No need for complaining over these minor things.... :P
:D -
well I suppose it did *vaguely *resemble the pics in the listing ... ::)
@Gareth said:
damn. >:( You do at least have a good argument that it's not what was advertised, with the pic obviously not being the same as the actual thing.Well I've sent the seller a message telling them what I would have bid if they'd have advertised the ACTUAL goods ... and now we wait for their response

-
Thats a shame Mate, hope it works out OK!

-
@sparky415 said:
Thats a shame Mate, hope it works out OK!
+1 sounds like you have a good case for a reduction Al

-
@50ft-trad said:
As I feared! Cheap lightweight junk made to look like the genuine article.
No proper metal drawer runners as photos, just wooden lats. Drawer bottoms are hardboard stapled in position. Utter scam!Hence me takin' the Piss back there AL

It looked smurf in the picture if you don't mind my brutal honesty??
I've considered these Machinists cabinets for a while too, as you say Gerstner looks good but limiting in my view. I recently bought a set of vintage plans off ebay to build your own machinists cabinet - looks simple enough, that way you could oversize the drawer depth for greater practicality.
Fancy a copy??
-
Oh, I knew it was a gamble (I'm not THAT daft), but a risk I was prepared to take. I was also aware I would struggle to even buy all the materials/parts to build the "sales spec" with the price I've paid. What I've got is probably plenty good enough for what I'd need (though possibly need a bit of reinforcing on the deeper drawers if I use it for heavier stuff) but I'm still going to chase a discount as the item was not as described.
If I can get a few quid knocked off, it'll stay and I'll be happy with it. It's not going in a workshop environment anyway, it's going in the house for storage of stuff I want free access to. Like I said earlier it'll have all by drafting equipment and engineering tools in, along with art and photography bits - all of which is used on and around my A0 drafting machine. It will look good alongside my desk, and should be adequate for my needs - but it'll look better knowing I got some money back on the deal ::)
Thanks for the offer of the plans but I'll pass on that
I don't have the time or space to do the build, and as I say this will do the job nicely once the money side has been addressed ;) Besides, if I was wanting to build myself, I'd probably jump on the drawing board first and design it myself too :D -
@wndrstrck said:
Happy Birthday to Me :DPulled the pin on the Fallkniven Gentleman's Pocket knife!
Sweet! The only pocket knife you can chop down a tree with?

-
Got the vintage pruner from PTRSAK in the mail today.
-
@50ft-trad said:
As I feared! Cheap lightweight junk made to look like the genuine article.
No proper metal drawer runners as photos, just wooden lats. Drawer bottoms are hardboard stapled in position. Utter scam!I get really PO'd when the item I receive is different to the photo that is supposed to be of the item. I rely on the photo/s as much more informative and truthful than the description in many cases, but if the photo is of something different that method of evaluation doesn't work.
I have received a "Taylor-china" Schrade Tough Piece-of-s(murf) when the photo was clearly of the proper US made Schrade Tough Tool. The seller claimed it was an error in the photo from their supplier - yeah, right !
-
Every time I have received dubious or counterfeit, fake, clone type items that were clearly advertised as something else, I demand a full refund and declare that I am not spending my hard earned money to ship back their junk. So far I have not had a problem recovering my funds or had a seller press me to ship back the piece of smurf. I then report the seller to Ebay and whatever company they are trying to rip off :D
-
@wndrstrck said:
Every time I have received dubious or counterfeit, fake, clone type items that were clearly advertised as something else, I demand a full refund and declare that I am not spending my hard earned money to ship back their junk. So far I have not had a problem recovering my funds or had a seller press me to ship back the piece of smurf. I then report the seller to Ebay and whatever company they are trying to rip off :DIt was a genuine Schrade, just not the made-in-US version. The seller offered a full refund, but expected me to pay for freight. I decide I couldn't be bothered with all the hassle and kept it for my collection to show just how far the quality can fall (a long way !) for what was a good tool until the bean-counters got control. I bought a proper US version to contrast the differences.
-
Just scored a Wenger Shredder for dirt cheap. ;D
Sent from my SGH-I727R using Tapatalk 2
-
@50ft-trad said:
Well I've sent the seller a message telling them what I would have bid if they'd have advertised the ACTUAL goods ... and now we wait for their response
Acceptance and apology for misleading ad, partial refund, and an assurance they would review and update their advert for future
It was agreed that some of the wording was applicable to their steel products not the wooden chests, and the pic with ball bearing slides was an older model (but apparently they kept jamming up so they changed the design). All in all an amicable settlement and I now feel I got a fair deal on the goods received, so I can start getting this loaded up tonight :) -
Good to hear you've come to a happy solution Al.

-
Cheers mate
Off on a slight tangent for general info ...It appears that the Gerstner ones (the most popular brand by far of these items) are two tier in quality and price. Gertner USA is around 3x the price of a Gerstner International (their sub-contracted overseas line), and this one I have is pretty much a Gerstner International chest with a different badge that just doesn't charge extra for the branding. From what I can tell, if I'd gone for a Gerstner International set up I'd have got exactly what I did from the other guys, but I'd have been charged up to £1000-1200 for the privalege (roughly 4-5x what this actually cost me)
... so when you look at it that way, I've done bloody brilliant :P Though if I'd have paid £1k for this, I'd be hammering on their door with a JCB I reckon >:D If the USA made ones are £3.5k - £4k though ... :ahhh :ahhh :ahhh ... thats some serious coinage, and no wonder people would look at making their own :o :o
-
Well done

-
Breezy12 is very kindly building me a ReCharge TTXi - Charge TTi with ALX Toolset and Rebar head.
I'm positively drooling with anticipation!
-
Nitecore T5s.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login