Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Wanted: Detailed Diagram of the 91mm Plus Scales

Scheduled Pinned Locked Moved Swiss Army Knights Forum
91 Posts 1 Posters 19.3k Views
  1. Home
  2. Tool Talk
  3. Swiss Army Knights Forum
  4. Wanted: Detailed Diagram of the 91mm Plus Scales
Wanted: Detailed Diagram of the 91mm Plus Scales
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Outback in Idaho Offline
    Outback in Idaho
    Posts: 5,432
    Outback in Idaho Offline
    Outback in Idaho
    wrote on last edited by Outback in Idaho
    #49 Quote Reply

      Added the strips, on the first set of scales that I am using for practice. Filed and sanded them down. Starting to realize I should replace my work desk some day... only had it since... mid 90's. :D

      Last I left with some rather hairy scales and a frame clamp. Those scales are still drying, and working with these to see how the wood works. Dremel really chews through it, yet by hand it takes a bit of work. Been using the Leatherman Rebar saw & file through most of this project.

      Here is a before and after photo of the scales.

      Didn't take photo on mouse-pad so won't have to clean out the artifacts again.

      This scale fit like a glove on my Climber, and used it to pose in the photos. Here's a view from the other side of the wood scale. The 3/32" of bare metal is no longer showing, and cannot see the glued strips either. :D

      Now from the other side. Only showing this scale, the next set of photo(s) may be the inlay if I try it. Waiting on the materials as I don't want to mess with that icky dye substance. It gums up my files and sand paper.

      Am concerned about one report of the tagua nut as vegetable ivory. Heard that it can deteriorate or pop out after a year. Don't want to keep in a wet environment either as it is biodegradable.

      Might be a few days before the next post as the plain tagua nuts have not arrived, nor the magnets. And the Tung oil was just ordered last night. The nut pieces left DUNELLEN, NJ on the 9th and claim they will be in Boise, ID today. If so, might tackle that ivory part next sooner.

      Anyone have a good and simple Spartan helmet inlay design to share? Would be the cat's whiskers for the scale. :D

      1 Reply Last reply
      • Outback in Idaho Offline
        Outback in Idaho
        Posts: 5,432
        Outback in Idaho Offline
        Outback in Idaho
        wrote on last edited by
        #50 Quote Reply

          Worked on a small Spartan like helm using the red dyed tagua nut, scraping out a hole, then... *** SNAP! *** Don't have the room or tools to work on something so small, and so brittle. Figured the nut would have been stiffer than it is.
          Glued it onto some backing to work with and broke another piece. Am taking it as an omen and not pursuing inlays with tagua nut any further. Maybe if I had some thin synthetic material to work with, or metal.

          So going to stick with just the wood scales.

          Attached was the idea was going with. The yellow was when had it glued to cardboard hoping to save it. It broke again since then and don't have the patience for it.

          DSC02173.JPG

          1 Reply Last reply
          • Outback in Idaho Offline
            Outback in Idaho
            Posts: 5,432
            Outback in Idaho Offline
            Outback in Idaho
            wrote on last edited by
            #51 Quote Reply

              Got creative again tonight with the first set of scales for the Spartan. No magnets or tung oil to finish it, so final sanding and preparation for another day. Must remember to put the pin channel in too.

              Used the Leatherman Charge TTi's file & Rebar Saw, and a 3/32" drill bit to gain some depth. Things are tight in there! Had to take it slow and easy.

              Showing the channels, done by hand.

              Tools laying in channels. Notched out the plastic ^ on the toothpick too. :D

              Tweezers side. Too much spring to slide them under the scales.

              Corkscrew side with tools slid in.

              Once I get more materials in will make an update. Since am working with wood I had ordered 1.5mm x 2.mm flat round magnets to hold the tools in better. May go ahead and start the 2nd set for the Climber one of these nights.

              Debating on how to seal the inner scale sides to allow me to apply epoxy to the bolts. If am going to use oil, would probably need to pick up some sort of sealant, right?

              1 Reply Last reply
              • PTRSAK Offline
                PTRSAK
                Posts: 4,776
                PTRSAK Offline
                PTRSAK
                wrote on last edited by
                #52 Quote Reply

                  try mixing up a little of your epoxy and thin it with some metho or rubbing alcohol, not too much, just enough to make it runny so you can paint it on.

                  1 Reply Last reply
                  • Outback in Idaho Offline
                    Outback in Idaho
                    Posts: 5,432
                    Outback in Idaho Offline
                    Outback in Idaho
                    wrote on last edited by
                    #53 Quote Reply

                      @PTRSAK said:
                      try mixing up a little of your epoxy and thin it with some metho or rubbing alcohol, not too much, just enough to make it runny so you can paint it on.

                      Awesome idea! Wouldn't of thought about that.

                      Someone posted some feedback on Dremel's facebook page. These look nice but think am going to pass on them for now. The information might help others.

                      Lee Valley - Carbide Burr Set, Set of 8
                      These eight small carbide burrs can be used on any steel, steel alloy, or non-ferrous metal.
                      Useful for detail work on hardwoods, tagua, bone, etc. 3/32" shanks. 1-3/4" long.

                      1 Reply Last reply
                      • Outback in Idaho Offline
                        Outback in Idaho
                        Posts: 5,432
                        Outback in Idaho Offline
                        Outback in Idaho
                        wrote on last edited by Outback in Idaho
                        #54 Quote Reply

                          The miniature neodymium magnets arrived!! The shipper sent 60 of the lil' buggers! :mail:
                          Along with some natural Tagua Nut. Think the vegetable ivory will be too pale for the Silk Oak wood am using though. May have to stash them for another time, or find a home for them. :D

                          Now the fun begins. Hopefully the 100% Tung Oil will arrive by the weekend.

                          Oh, after measuring the scales, seems the second set is at 4mm. That's going to be a close call to sneak a pen slot in since a pen is 2.5 mm thick. Will see. The grain is more attractive than my first set too.

                          For future reference:
                          Since the polarity is across the flat surface of a magnet, keep the width down to 2mm or less. 3mm wide means a 3mm deep hole into the scale material if you want a specific polarity.
                          To maneuver the magnet use the end of a straight pin or a fine finishing nail. File the head to a more flat surface if needed, as straight pins have a ^ type of head.

                          1 Reply Last reply
                          • Outback in Idaho Offline
                            Outback in Idaho
                            Posts: 5,432
                            Outback in Idaho Offline
                            Outback in Idaho
                            wrote on last edited by
                            #55 Quote Reply

                              Fist set of scales are about done past sealing and finishing, but I am not satisfied with them being so thin. Both scales are around 4.5mm to 5mm. The pen is really close to the surface, can feel the pressure when working that channel. Feeling the file is not a good sign. There should be more space there.
                              However the tweezers side is about good on space. But want to keep both scales the same width, yet don't want a fat knife either. What to do...

                              Other scales are 5mm thick on average, which are ready to be worked out. this means the top & bottom of one scale would be very light sanding if am going to make the clearance.
                              Another option would be is to kick the toothpick out and just go with tweezers on one scale, pen on the other scale. May go with that and see how it holds up.

                              Blank is 11mm thick. Have no mechanical means of reducing the width to 7mm.

                              What the issue was trying to save the wood by trying to get two sets of scales out it. Giving the saw blade width that cut things way too close. Ended up having to add side strips. Adding material to the sides was not hard, but it still entailed using glue.
                              Width on the other hand. 11mm, cut in half, 1mm thick saw blade, gave 5mm. Once on starts flattening and sanding that 5mm turned to near 4mm, and thus there's just not enough material to last years down the road. One bad fall would result in a cracked scale.

                              Corkscrew is 7.5mm wide. From the spacer to the outside it is 4.5mm. Shouldn't the scale should be at least 4.5mm to match, or 5mm?

                              Anyone have a 91mm Plus scale laying around, and could measure it's average thickness for me?

                              have found out the neodymium magnets can be files down with a diamond file. :D

                              1 Reply Last reply
                              • Outback in Idaho Offline
                                Outback in Idaho
                                Posts: 5,432
                                Outback in Idaho Offline
                                Outback in Idaho
                                wrote on last edited by
                                #56 Quote Reply

                                  Showing the current status of the first set of 91mm Plus 'Silk Oak' scales, average 4.5mm thickness.

                                  Top View

                                  Inside Overview

                                  Inside - Low Profile

                                  1 Reply Last reply
                                  • PTRSAK Offline
                                    PTRSAK
                                    Posts: 4,776
                                    PTRSAK Offline
                                    PTRSAK
                                    wrote on last edited by
                                    #57 Quote Reply

                                      Basic shape roughed in. Burled Yellow Box. (not oiled yet, just a bit of water on them to show the grain)
                                      These are for a sportsman/tourist/small-tinker, not decided which they are going on yet.

                                      Got these and another pair out of one slab with enough to do several 58mms as well.
                                      Will cut some 91mm scales out of the other slab.

                                      1 Reply Last reply
                                      • Outback in Idaho Offline
                                        Outback in Idaho
                                        Posts: 5,432
                                        Outback in Idaho Offline
                                        Outback in Idaho
                                        wrote on last edited by
                                        #58 Quote Reply

                                          How thick are your scales?

                                          1 Reply Last reply
                                          • Outback in Idaho Offline
                                            Outback in Idaho
                                            Posts: 5,432
                                            Outback in Idaho Offline
                                            Outback in Idaho
                                            wrote on last edited by
                                            #59 Quote Reply

                                              Going to bed aggravated. The second set was too thin. Have another 11m blank that am going to stagger cut and somehow take down 4mm while working with it. So smurfin' let-down, broke the scales.

                                              The diagonal pen idea was working out but it also made the 4mm scale too weak. 1.5 mm is not enough room for structural integrity.

                                              RIP secondary set.

                                              DSC02205.JPG

                                              DSC02206.JPG

                                              1 Reply Last reply
                                              • Wootz Offline
                                                Wootz
                                                Posts: 473
                                                Wootz Offline
                                                Wootz
                                                wrote on last edited by
                                                #60 Quote Reply

                                                  Not sure if it is to any use right now, but I glue the scales on very rough shaped. Don't bother getting the outer shape exact at this point. Just the rivet holes need to be precise. I'm leaving 1 or 2 mm wood around the edges and plenty thick. Once the epoxy is set start shaping the scales from coarse to fine. I do leave the T&T out, making it an even simpler job.

                                                  1 Reply Last reply
                                                  • Outback in Idaho Offline
                                                    Outback in Idaho
                                                    Posts: 5,432
                                                    Outback in Idaho Offline
                                                    Outback in Idaho
                                                    wrote on last edited by
                                                    #61 Quote Reply

                                                      @Wootz said:
                                                      Not sure if it is to any use right now, but I glue the scales on very rough shaped. Don't bother getting the outer shape exact at this point. Just the rivet holes need to be precise. I'm leaving 1 or 2 mm wood around the edges and plenty thick. Once the epoxy is set start shaping the scales from coarse to fine. I do leave the T&T out, making it an even simpler job.

                                                      Your idea helped. Also one fellow at Home Depot suggested the idea I had in mind to use, was to cut what was needed first the size it down.

                                                      Had set the holes, whacked the raw scales in with a light-weight rubber mallet, shaped them from a raw 11mm blank. Added channels to fit the scale tools, got them within tolerance.
                                                      Looked around the tool, decided on 7mm thickness. Cut small sections with a coping saw, and a my Charge TTi's S30v blade for slicing the sections off from the end to the other. Shaped it down with a Dremel sand roller.
                                                      Mounted them on the Climber again, decided to take the middle down to 6mm, giving a small flat face on the side. Sanded down that down, filled some holes. Waiting for them to cure in before I proceed further.

                                                      Been using the small driver on a Squirt S4 as a chisel to cut square holes for the magnets. Then have to epoxy them in. Haven't put the pin in yet.

                                                      Was thinking of heating another pin and pressure burn a hole through into the wood. Not sure how this will work. Cutting a thin pin channel on the other scales was iffy. If there is the slightest gap between the scale & knife the pin just will <u>not</u> doesn't cooperate.
                                                      Could cut a deeper channel, then glue a toothpick or sliver of scrap wood over the back & sand it down. This reverse frame idea might work better. Least it looks good on paper. :D

                                                      DSC02207.JPG

                                                      DSC02208.JPG

                                                      1 Reply Last reply
                                                      • Outback in Idaho Offline
                                                        Outback in Idaho
                                                        Posts: 5,432
                                                        Outback in Idaho Offline
                                                        Outback in Idaho
                                                        wrote on last edited by
                                                        #62 Quote Reply

                                                          Something I was thinking about. Keep seeing these branches/trunks of wood with their bark still attached to furniture, cabinets, even house trim. The knots, limbs, and other imperfections are only cut off. They are shaped to remove rough edges, looking like either a clean slice with rounded corners or chopped segments.

                                                          People buy this rustic look. Why not get some limbs and make rustic wood knife handles too? Am sure someone's already down that to other fixed knives, but not seen a SAK handle like that yet. Would definitely make for a unique look - maybe for display or gift.

                                                          1 Reply Last reply
                                                          • Wootz Offline
                                                            Wootz
                                                            Posts: 473
                                                            Wootz Offline
                                                            Wootz
                                                            wrote on last edited by
                                                            #63 Quote Reply

                                                              You want a comfortable grip, no limbs sticking out for me.

                                                              1 Reply Last reply
                                                              • Outback in Idaho Offline
                                                                Outback in Idaho
                                                                Posts: 5,432
                                                                Outback in Idaho Offline
                                                                Outback in Idaho
                                                                wrote on last edited by
                                                                #64 Quote Reply

                                                                  @Wootz said:
                                                                  You want a comfortable grip, no limbs sticking out for me.

                                                                  Oh, I agree. Get a load of these bed posts. /shakes head

                                                                  Cut a pin groove, flipped a blade over on the spine, skived that out slowly. Wished could somehow secure the pin to staying in the groove I cut for it. Put a magnet, north facing towards the pin, and have it setting up in the clamp.
                                                                  Have a magnet in the tweezers, and another at the head of the pen channel. They are tiny lil' rascals and are only powerful at close proximity. So they have to be touching or close to hold any metal in the grooves.

                                                                  Was crazy, the first scales I made are at 4mm and are waiting for the tung oil to arrive. The third set is at 6mm, and gluing magnets in and touching up some areas.

                                                                  Not sure what else to use to seal the wood. Tried mixing the gel epoxy, but that stuff doesn't come out of the tubes evenly. Was no individual epoxy tubes available. All were the double-chambered one-piece syringes. One comes out easy and too much, the other sits there then comes out at once - in small amount. Cut it with nail polish remover (acetone). It is still drying.
                                                                  Our area seriously lack a hobby & craft shop.

                                                                  Picked up this Locktite Gel epoxy for what it bonds to. 6 minute setup though. :whistle:

                                                                  1 Reply Last reply
                                                                  • Outback in Idaho Offline
                                                                    Outback in Idaho
                                                                    Posts: 5,432
                                                                    Outback in Idaho Offline
                                                                    Outback in Idaho
                                                                    wrote on last edited by
                                                                    #65 Quote Reply

                                                                      Hate mixing epoxy. Rarely do I actually get the right mixture to where it sets up like it should. Have a sealant layer on the 3rd set of scales. Had to redo the sealant mixture on the 1st set as the epoxy was still tacky after 8 hours.

                                                                      Note: Looks like it is setting up. :whew:

                                                                      The 1st set is ready for the tung oil, and the 2nd will be ready if this sealant mixture sets up.

                                                                      Black spots are the teeny neodymium magnets. May have to add a secondary south-touching magnet for the pin groove since was unable to burn a straight groove through the wood, and that testing is showing the pin wants to launch upwards. If there's a slight gap between the scale and the knife, that will cause issues. Better to get it right the first time.

                                                                      3rd set of scales is 6mm.

                                                                      DSC02211.JPG

                                                                      DSC02212.JPG

                                                                      1 Reply Last reply
                                                                      • Outback in Idaho Offline
                                                                        Outback in Idaho
                                                                        Posts: 5,432
                                                                        Outback in Idaho Offline
                                                                        Outback in Idaho
                                                                        wrote on last edited by Outback in Idaho
                                                                        #66 Quote Reply

                                                                          Now I haven't used tung oil in ages. :think:

                                                                          Guess the Tung oil application is going to take days, or a week. :ahhh

                                                                          Woodworking : How to Apply Tung Oil to Wood

                                                                          1 Reply Last reply
                                                                          • Outback in Idaho Offline
                                                                            Outback in Idaho
                                                                            Posts: 5,432
                                                                            Outback in Idaho Offline
                                                                            Outback in Idaho
                                                                            wrote on last edited by
                                                                            #67 Quote Reply

                                                                              Read an interesting article on oil finishes, and how various finished came about, were blended, other forms that came into play, and label trickery. Oil Finishes: Their History and Use

                                                                              It is a very good read. :2tu:

                                                                              1 Reply Last reply
                                                                              • Wootz Offline
                                                                                Wootz
                                                                                Posts: 473
                                                                                Wootz Offline
                                                                                Wootz
                                                                                wrote on last edited by Wootz
                                                                                #68 Quote Reply

                                                                                  There's much to discover on this board, grasshopper. :D

                                                                                  </topic/42415

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Swiss Army Knights Forum
                                                                                  4. Wanted: Detailed Diagram of the 91mm Plus Scales
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0