What do we have on the way?
-
I've been looking into a space heater for the back yard in the winter. I sit back there a lot smoking cigars.
-
@stealth007s said:
I've been looking into a space heater for the back yard in the winter. I sit back there a lot smoking cigars.Here is the link to the heaters, they are the exact same ones sold by Grainger.
http://www.zorotools.com/g/Portable Infrared Propane Heaters/00060422/In fact when you order them from Zorotools they get shipped to you from Grainger with the Grainger part number on the box! The same exact heater as Grainger but over $ 50 cheaper and free shipping!
I got the 32,000 BTU unit but depending on how close you want to sit to the heater and the number of people you might consider the 16,000 BTU unit because it uses gas at 1/2 the rate.
These heater were sold under the Dayton brand for years. 2 of my brothers have had this exact heater for over 20 years (Dayton) and they still work great. The heaters are made in the USA by Detroit Radiant Products and they are a great heater.
Lighting Cigars would be a 3rd function for this heater...it's getting more versatile all the time.
Bruce
-
I'm still not sure how the bottle opener would work

-
@stealth007s said:
I'm still not sure how the bottle opener would work
It mounts to the tank with 1"x1" angle iron that leaves a nice piece available to open the bottle with a little tap on the top. If I can get someone to take a picture I will demonstrate the bottle opener. Of course I have found a lot of ways to open a bottle of brew!
Bruce
-
"When you're holding a bottle of beer... everything looks like a bottle opener."
-
One of these (juice pro)

One of these(super tool300)

And two of these (Victorinox Swiss tool rs)

-
I finally got a call from the person I am getting my BuckTools from. He said they should ship 2/15.
I can hardly wait as it has been to long. Pictures when they arrive. -
@baja820 said:
One of these (juice pro)

One of these(super tool300)

And two of these (Victorinox Swiss tool rs)

Nice ones
The Swisstool RS is actually the version I had really considered getting before deciding to go with the Spirit. I had read too many reviews stating it was really too heavy for pocket carry, and that's how I prefer to carry them. However, since switching my full size MT carry to my back pocket with my wallet, that extra couple ounces may not be as relevent anymore
....exactly how much does the RS weigh? -
@Monrogue said:
Nice ones
The Swisstool RS is actually the version I has really considered getting before deciding to go with the Spirit. I had read too many reviews stating it was really too heavy for pocket carry, and that's how I prefer to carry them. However, since switching my full size MT carry to my back pocket with my wallet, that extra couple ounces may not be as relevent anymore
....exactly how much does the RS weigh?According to an online store that I was looking at anyway, 320 grams ;) (which is about 11 ounces)
-
The RS hasn't arrived at my house just yet but I usually carry a small multi tool like a juice or wave in my front pocket and a full size tool on my belt so I'm sure it won't be too much of a problem.
I'll let you know how it feels compared to a surge or ST300 or sog power lock.
-
@baja820 said:
The RS hasn't arrived at my house just yet but I usually carry a small multi tool like a juice or wave in my front pocket and a full size tool on my belt so I'm sure it won't be too much of a problem.I'll let you know how it feels compared to a surge or ST300 or sog power lock.
Yeah, I used to carry my Charge AL (the heaviest MT I own at 8.6oz.) in my front pocket, but it was a bit too much. That became even more of an issue once I got into SAKs, so now I don't prefer much more than a SAK for bulk/weight. The Rebar is doable though, but it's slim and only 6.7oz. I just worry that the RS would be too large and heavy for even back pocket carry. However, I love the looks of it, and would like to get one eventually, but only if I can carry it that way.
I look forward to your update/comparison
. Thanks 
-
Baja- they should go out today
Monrogue- while i front pocket carry many tools as I'm often outdoors and therefore wearing carhartts, and the only tool I've ever found slightly big was the autotool, but only slightly, i think my thoughts could help you out. Back to the point. The swisstool, while heavy, is an excellent pocket carry candidate, as it's really slim. Slimmer than most, if not all, 4.5" tools i own. It's about the same thickness as the original super tool. Thinner than a wave or charge, it's only slightly thicker than a leatherman kick, if you include the thickness of the screws, the swisstool is actually thinner! On top if that, it's also wide, slightly wider than a st300, which helps keep it from spinning. It's really very good. Just my $.02
-
@SAKnight said:
Baja- they should go out todayMonrogue- while i front pocket carry many tools as I'm often outdoors and therefore wearing carhartts, and the only tool I've ever found slightly big was the autotool, but only slightly, i think my thoughts could help you out. Back to the point. The swisstool, while heavy, is an excellent pocket carry candidate, as it's really slim. Slimmer than most, if not all, 4.5" tools i own. It's about the same thickness as the original super tool. Thinner than a wave or charge, it's only slightly thicker than a leatherman kick, if you include the thickness of the screws, the swisstool is actually thinner! On top if that, it's also wide, slightly wider than a st300, which helps keep it from spinning. It's really very good. Just my $.02
Thanks for the info, it was very helpful
I wasn't aware that it was as slim as you say. I had heard it was bulky, and perhaps I misinterpreted that to mean it was too thick for some. Is is similar to the Spirit in shape, only a bit longer and thicker? Maybe you don't have a Spirit to compare as you never mentioned one above? I have the Spirit and it's great with its slim profile, and your description of the Swisstool sounds similar to that, only a little larger in dimensions obviously. -
I have my first Charge on the way. Alx here we come.

-
Just received a Farmer from Chip


-
A pair of Alox donors. The scales from the red Settler will probably get the guts of a Farmer and some brass liners slotted between them, Instant "old red cross farmer". If I can't afford the real thing, repro will do.
The Greenie is a Solo and I can see that spring driving scissors in something.
Shame the logo looks like a giant roll of TP... A green Urban Pioneer would be nice. -
:D
First thing I thought was also TP. But I could live with that. ;)
-
Would it make you feel any better to know that it's Cascades paper?
Sent from my SGH-I727R using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login