Any love for Wenger?
-
Wenger SI without cross...
</post/694345>
-
@victor7000 said:
Wenger SI without cross...</post/694345>
Don't think I've ever seen one like that. Great find!

-
@victor7000 said:
Wenger SI without cross...What, when, how,...? :ahhh Is this new stock or a a factory mishap?
-
Seems to be a regular item. Perhaps Wenger run out of frontscales :)
On the box it is described as "Swiss Army 70 sans croix" and it has a number AF.1.070.001.000.01 and was made 07/2012


-
@victor7000 said:
Seems to be a regular item. Perhaps Wenger run out of frontscales :)On the box it is described as "Swiss Army 70 sans croix" and it has a number AF.1.070.001.000.01 and was made 07/2012
So an added .01 to the standard. More likely they aren't allowed to use the official shield anymore as they are no longer under the government contract, so they are using up their back scales.
BTW. was there any follow up on the story about the government suing Victorinox and Wenger for using the federate shield on their non army knives, bags, watches, ... ? I haven't been following the story for some time now.
-
Seems to be a regular item. Perhaps Wenger run out of frontscales :)
On the box it is described as "Swiss Army 70 sans croix" and it has a number AF.1.070.001.000.01 and was made 07/2012
So an added .01 to the standard. More likely they aren't allowed to use the official shield anymore as they are no longer under the government contract, so they are using up their back scales.
that would be my guess as well.
-
Any idea of what it is?
I don't have big knowledge on the 65mm models, but it seems almost an hybrid between a Macao and a Lithos.
Right now I'm calling this a Mac-ithos :DIts a 'Blue Marble' Macao, with lacquered handles.
(the photo is of my collection. :D)
Nice collection!
So it is possible to have a Macao with the ceramic nail file, like on mine example? -
@victor7000 said:
Seems to be a regular item. Perhaps Wenger run out of frontscales :)On the box it is described as "Swiss Army 70 sans croix" and it has a number AF.1.070.001.000.01 and was made 07/2012
Never saw this variation before!
-
Any idea of what it is?
I don't have big knowledge on the 65mm models, but it seems almost an hybrid between a Macao and a Lithos.
Right now I'm calling this a Mac-ithos :DIts a 'Blue Marble' Macao, with lacquered handles.
(the photo is of my collection. :D)
Nice collection!
So it is possible to have a Macao with the ceramic nail file, like on mine example?All my Macaos have the regular steel nail file. Forgot the Lithos had the ceramic files. Was so busy looking at the handle I didn't pay attention to the blades. Went through my other fancy Esquires and only the Lithos have them. Nice find!

-
Alox traveller with the locking blade, very nice.
-
@enki_ck said:
Wow, very nice find.
Never seen this one. If you find any more info or need something on it translated from Croatian, let me know. I'd be happy to help. 
Sorry, I forgot to answer.
Thank you for your offer to help! I did find all the informations in english, so it was not a problem.
Should I find more material that will need to be translated, I will let you know! ;)@ColoSwiss said:
All my Macaos have the regular steel nail file. Forgot the Lithos had the ceramic files. Was so busy looking at the handle I didn't pay attention to the blades. Went through my other fancy Esquires and only the Lithos have them. Nice find!
I'm wondering if it was a factory error, then

@papercut said:
Alox traveller with the locking blade, very nice.
-
Great Find! Has to be pretty unique!
Very Nice!
@victor7000 said:
"Swiss Army 70 sans croix" and it has a number AF.1.070.001.000.01 and was made 07/2012
Very interesting find. Maybe you can ask Wenger the story behind that one.
Looks like several people are turning up some really great Wenger models.
-
I think that the alox machine is delemont must be on fritz and they are using up old stock. That wod be the only reason to make it in that manner IMO. It might end up being very rare!
-
I've had my first three Wenger 85mm's for about a week now and have to say I'm underwhelmed. Two needed pins to be hammered tighter to prevent atrocious side to side play. The third had a scissors screw go from tight to literally falling out with just a few uses. I was able to put it back in, but I'll have to be vigilant about tightening that screw often. All three have weak springs relative to Victorinox. I think the step down in quality would be obvious to most knife users.
These three were all used models, probably more than ten years old, and, hence, may only be a reflection of 1990's or early 2000's Wenger quality. But I've bought quite a few used Victorinox knives of similar age and condition and have never had problems like these. My sample is admittedly small and non-scientific. But I'll shop for Wengers with caution in the future.
I would like to try an newer Evo model, however, as I've heard Wenger quality rose after the Victorinox acquisition.
-
It also depends how hard a life it's had before. If the previous owner has been working the tools hard and sprained the pins, it could account for at least some of the issues you're finding. Whilst many of my Wengers don't shout as loud on the snap on opening and closing, it's certainly not affected the functionality of them in use. Not sure what you mean by screwdriver screw though

-
Sorry, meant to say "scissors screw" and misspoke. And, yes, the current condition of these Wengers may well be a reflection of past use and abuse. But the same would be true of used Victorinox knives I've bought as well. It could be just chance that these Wengers were used harder. But it seems unlikely.
I don't wish to convey that I don't like the Wengers or regret my purchases, all of which were at pretty bargain prices. For the money paid, these Wengers are fun and functional. But their construction seems a bit delicate compared to similar Victorinox models. These will be users, so I'll see how well they hold up to hard use (but not abuse).
I also bought a 1990 SI a couple weeks ago (had a thread about restoring a snapped tip). I find the quality on it to be equal to the Victorinox alox models.
-
Ah, ok - I'd suggest taking the screw out and putting a bit of threadlock or something gummy on the thread before putting it back. Threads wear, and temperature changes for such small threads can make a difference too sometimes
Oh - and don't over tighten the screw either, there is meant to be some play on the Wengers for them to work properly. The underside of the scissor arm has a chamfer, and a corresponding chamfer on the top of the spring lever. This is to kind of push the arms apart, which in turn pushes the blades together ;) Nip the screw up too tight and it will have an adverse effect 
I'd say 85mm Wengers aren't quite as robust as 91mm Vics, but a bit more robust than 84mm Vics. In some ways they are a little more robust with having the locking drivers, but that might lead people to work them a bit too hard ... which might have happened to yours :)
I'd definitely give one of their newer models a try if you can to remove the "past abuse" issue. You'll still find the springs to be a little softer, but should eliminate all your other issues
-
Understood. I had already planned to pick up some Lock-Tite this weekend and give the Tradesman some attention. Lock-Tite is good stuff to have around anyway.
I was lucky I didn't lose the screw altogether. What a pain that would have been to replace .... probably easier and possibly cheaper just to buy another used knife.
-
@Mud Shrimp Moe said:
Understood. I had already planned to pick up some Lock-Tite this weekend and give the Tradesman some attention. Lock-Tite is good stuff to have around anyway.I was lucky I didn't lose the screw altogether. What a pain that would have been to replace .... probably easier and possibly cheaper just to buy another used knife.
Absolutely :ahhh Good luck with it all, and don't forget to post how you get on

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login