Center drilling
-
@HankSolon - I'd say it could. Make the hole the size of the screw and tap it. It'd be worth a shot for sure.
-
Nice little guide
Another tip before attempting driling is to mount the workpiece in the chuck as per the guide, but lower the end down onto an abrasive surface to square up the end of the pin. If attempting to drill deep holes like this, especially if size specific (such as drilling at the tapping size for making pivot barrels without risking truncating the threads with a slightly oversize bore) its very important the entry face is square to the drilling axis. This can be more critical if you're having to "join bore" or match the bore up via drilling from both sides to avoid a mismatch, which would then likely snatch and cause either the pin or drill to spin. So my suggestion would be to cycle through the pins and face them all up on both ends before setting up the static drill 
-
Brilliant!
-
I just thought of a use case I can test this with. Im making a very wide 5 layer alox mod today and normally I do that pin splice trick. Now I have Ti rod the right size, what if I cut that to the right length and drill and tap each end so I dont have to splice. I like that idea.
-
Dr. Syph to the OR...Dr. Syph to the OR...

-
Awesome!
Now could someone please try to to drill into a 2.2mm rod using a 1mm drill bit (for M1.4 threading)?
I currently don't have access to a drill press. :ahhh -
I'd love to help but the machines I have access to are a bit too big and don't drill holes less than 2.5" (63mm) diameter :P Heaviest job I was involved in was several years back which was about Dia 14" (355mm) hole from solid x 6500mm long. That's over 5 tonnes of metal removed in one pass and around 48 hours to go from one end to the other :ahhh In fact the smallest I've ever been involved in was Dia 3.5mm x 200mm deep, but that was about 15 years ago

-
What on Earth is your industry?

-
Heavy engineering :) Generally I get roped into the wierd, problematic and smelly aspects that other people can't figure out. It's partly why I'm wierd, problematic and smelly, and people can't figure me out :P
-
@50ft-trad said:
Heavy engineering :) Generally I get roped into the wierd, problematic and smelly aspects that other people can't figure out. It's partly why I'm wierd, problematic and smelly, and people can't figure me out :PSounds fun to me!
-
Another idea that helps, ;) , is to use a old drill chuck mounted to the vice. Keeps things squared up :)
-
Aw crap! Another reason to buy a drill press.
;) -
@oreogaborio said:
Aw crap! Another reason to buy a drill press.
;)You should be able to buy them for just over $100. Mine is a bench top one, not a floor stand, that I got on sale for $80. Its still going strong.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login