The Splash - LM Squirt Mod
-
This is one of the finest mods I've ever seen! I can see myself EDC'ing one of these easilly

-
Nicely executed. Now if your goal is to keep adding layers and making the tool wider, but also useful. I recommend a way to hold a couple of bits next. Since you have that driver part on the scale. :D
-
@Syph007 said:
Nicely executed. Now if your goal is to keep adding layers and making the tool wider, but also useful. I recommend a way to hold a couple of bits next. Since you have that driver part on the scale. :DYah, that was the new thing, stainless shell with some plastic inserts for bits. Another idea is to have the bit extender detachable.
-
Hrmmmm.
I put the hex driver scales on the Original Splash but then I had this extra set.
Sooo I made another Squirt with stainless scales.
Think of it as a splash minus the SE and warney/wire stripper blade.
Now I am thinking of putting a pocket clip on it...



I think from now on, I'll put a SAK next to this project so there is a sense of scale.

-
It´s quite cute... :)
-
Very 8)
-
Aww

-
I actually used the Splash a lot last weekend. Cutting duct tape, pulling staples, turning over exposed brad nails and cutting string.
The Skinth is helping!
-
That looks great Eric! I didn't really realize just how small it was until you put it up against the SAK. You really managed to stuff a lot of functionality into a pretty small package!!

-
@Metropolicity said:
Here we are folks, the much anticipated HEX DRIVER SCALES!I threw this together really quickly since I've already had a 14 hour day but I really wanted to get this off the ground to see if my crazy idea would actually work.
Lets talk with pictures..
Here we're are, after boring out the pivot holes to 1/8, boring out the screw head recesses and polishing the pivots (just a tad too big for the parts), the new squirt is born. The 1/2" long pivots allow for three layers to be made with out and splicing.

Now the business end the hex hole.

The concept is to have the pressure of the Plier backsprings for bit retention and your hand grip to really hold it in while torquing

Seems to fit...

And a side look..

Don't believe me? Check this out!

Like I mentioned before, your hand pressure will allow for the bit to be held in nice and tight.

Where this really shines is when I can use a short bit extender, I need to find myself a ratcheting bit extender.


There isn't a a really good way to finish the scales, unlike the flat surfaces of the regular scales. A side by side comparison shows the rough (but smooth to touch) scales and the sanded and polished scales I did a couple of days ago.




I'll take some more time soon and make a Splash MKII and add those scales. I'll likely revisit the scale 3D model, make the screw recesses larger and the pivot hole larger too for less finishing and more drop in.
I am in awe of this mod. Of all your amazing projects, the Splash is my favorite. I was not sure how the hex bit scales would fare given that bits are so short, but with an extender, especially a ratcheting one, truely astounding. Bravo, Sir.
If Leatherman, Gerber, SOG, Victorinox, or Multitasker don't head hunt you, you need to go into business creating MTs. You already have the best sheaths available (I finally have more money so I expect to be ordering a Skinth soon)
-
I whipped up a Skinth for it today. I used the same pattern for the Keyport Skinth I haven released yet and it came together quite nicely.


Room for a toothpick, signature pen and a pico pry bar.

I padded the bottom with a nitrile glove, because you never know when you need that extra bit of protection.

I have some of those laser pointer/led light combo keychains coming in the mail, it should fit in there just perfectly.
-
Your Skinths are awesome. I still need to get my order together once I figure out what all I need :D
-
hrmm...the scale file has been edited and the quote for sterling silver is $103, and stainless steel ones at $35 or so.
It's still less than the Leatherman Argentum Limited Squirt Series ($240 if you can find one).
http://toolguyd.com/leatherman-argentum-ornate-multitools/

Here are the new scales: http://www.shapeways.com/model/945279/squirt-scales-v5-scissor-uni.html?li=my-models&key=cff8256d9b79a4118fca9e0c31e66c04

What I wanted to achieve with the recessed areas is a nice definition between the textured finish of the 3D printing and the smooth sanded areas, it'll look more like a Charge TTi. It won't be anything functional, now that I've proven that it'll work. It's all about style now.
The sanded areas can get scratched pretty easily so the rough areas and minium polished 'frame' will be a nice addition.

I think I'll get a set of stainless and see if they fit better. I am getting closer and closer to the perfect Squirt and even closer to having the scales available to anyone who wants them.
-
With it's own little Skinth.... love it! :D
-
YAY! new edited scales were accepted by shapways. Hopefully there are no more problems and there will be a new set of sexy stainless mini TTi like scales by March 15th.
-
Well, that's a shame.
iMaterialize got back to me with a quote on 3d printed Ti scales...350 EUROS, not $'s people, EUROS!
That's $450 CANADIAN, even I am not THAT crazy. I could buy a life time supply of Squirts for mods with that kind of money.
The new Stainless scales will look so boss that I may forget about this idea all together.
--
Another idea is to get some plastic scales done and put a liner in...liner lock anyone? Sheet material would have to be waterjet or laser cut. Just when you thought it's the most I could do with a Squirt. This has me thinking!
-
@Metropolicity said:
Well, that's a shame.iMaterialize got back to me with a quote on 3d printed Ti scales...350 EUROS, not $'s people, EUROS!
That's $450 CANADIAN, even I am not THAT crazy. I could buy a life time supply of Squirts for mods with that kind of money.
The new Stainless scales will look so boss that I may forget about this idea all together.
--
Another idea is to get some plastic scales done and put a liner in...liner lock anyone? Sheet material would have to be waterjet or laser cut. Just when you thought it's the most I could do with a Squirt. This has me thinking!
I could hand cut and finish some Ti scales for alot less than that. :D What thickness to you make them from. I just hand cut some cadet scales from 1/16 inch (0.064") Ti.
-
@Syph007 said:
I could hand cut and finish some Ti scales for alot less than that. :D What thickness to you make them from. I just hand cut some cadet scales from 1/16 inch (0.064") Ti.The scales have integral bosses and other scallops on it. It's not the thicknes, it's the volume. Even so, the VOLUME is only 3.6 cubic CM's.
I'll stick with stainless for now...and hope one day they get beyond the bronze infusion process.
-
Meanwhile...at Metro's Q-Branch...The Hex Driver scales pose for some cover shots:





-
Lovely.I always think this tool is bigger than it is until the bit and bit holder puts it into scale.
My mind wants me to believe it´s about the size of a 84/91 mm, don´t know how, maybe because it´s so feature-packed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login