Which SAK is getting pocket time today?
-
Swisschamp pouch carried with a solitaire

-
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :) -
@Monrogue said:
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)Why not a Climber until you get a Yeoman? Then you at least have the can opener for philips screws. Works really well too. :)
Edit: Oh.. Hero member! 8)
-
@Monrogue said:
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)Have you tried anything like these off a belt or belt loop, cheaper than a 20.00 dollar clip.

-
@colt 1911 said:
Have you tried anything like these off a belt or belt loop, cheaper than a 20.00 dollar clip.
That's a really smooth solution, it's what I use whenever I carry a knife with more than two or three layers. As long as you make sure the lanyard is short enough to not allow the knife to hit the bottom of the pocket you hardly notice it hanging there. 8)
-
@Northern Geek said:
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)Have you tried anything like these off a belt or belt loop, cheaper than a 20.00 dollar clip.
That's a really smooth solution, it's what I use whenever I carry a knife with more than two three layers. As long as you make sure the lanyard is short enough to not allow the knife to hit the bottom of the pocket you hardly notice it haning there. 8)
Roger that !! I had to make a couple before i got the right size.
-
@Monrogue said:
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)I carry my Explorer with the clip daily and found that it is the best way to carry it. I would leave the Pioneer at home cause you dont need it when you have the Explorer or carry it when you dont want to carry the Explorer. :D

-
@Northern Geek said:
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)Why not a Climber until you get a Yeoman? Then you at least have the can opener for philips screws. Works really well too. :)
Edit: Oh.. Hero member! 8)
I had considered that, but I really like having the mag/phillips layer (magnifier in particular :D) and the Yeoman would be about as close to a perfect (for me) SAK as I could get. I already have a Compact, and the Explorer, so I am looking to eventually have them mated to make a Yeoman. I just have to have the spare cash. That would actually also yield a left over Climber ;)
I also would really like scissors added to my Alox Pioneer, but that is a pricey job. I could actually sacrifice the left over Explorer scissors to add to the Pioneer. So all together, that would give me a Yeoman, Spartan and an Urban Pioneer I think is what I've seen it called here. However, I need to save up some cash for all this work to be done, and that's not very easy for me right now. I just need to be patient :ahhh
And congrats on becoming a Hero member

-
Special Mechanic.
Gets a fair bit of carry time, this one :)

-
@Monrogue said:
I had considered that, but I really like having the mag/phillips layer (magnifier in particular :D) and the Yeoman would be about as close to a perfect (for me) SAK as I could get. I already have a Compact, and the Explorer, so I am looking to eventually have them mated to make a Yeoman. I just have to have the spare cash. That would actually also yield a left over Climber ;)I also would really like scissors added to my Alox Pioneer, but that is a pricey job. I could actually sacrifice the left over Explorer scissors to add to the Pioneer. So all together, that would give me a Yeoman, Spartan and an Urban Pioneer I think is what I've seen it called here. However, I need to save up some cash for all this work to be done, and that's not very easy for me right now. I just need to be patient :ahhh
And congrats on becoming a Hero member

Ah yeah, good points. Sounds like some good mods down the line when you get some spar cash at least. :D
And thanks. :)
-
Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)Have you tried anything like these off a belt or belt loop, cheaper than a 20.00 dollar clip.

I haven't tried that, and it looks like handy method. I would probably have to have a black one so as not to stand out considering I work at a bank and have to dress semi-nice ::) However, I may be able to find something to work with to make a loop like that, whereas I would have to buy a clip. Thanks for the suggestion

Pioneer and Explorer again
Will probably eventually switch the Explorer out for the Compact to reduce bulk, but I can't seem to put the Explorer away yet :D If I were to get a suspension clip for it, that would make me more likely to keep carrying it along with the Pioneer, but there is a fair amount of redundancy between them to justify the Explorer's bulk. The Compact is functionally the same, but misses the mag/phillips layer, which is why I reeeaaallllyy want a Yeoman :)I carry my Explorer with the clip daily and found that it is the best way to carry it. I would leave the Pioneer at home cause you dont need it when you have the Explorer or carry it when you dont want to carry the Explorer. :D

I would leave one at home, but I enjoy having two SAKs on me so I have multiple fiddling options :D
-
This guy.

-
Ooh my

-
Heating up the pocket for something new there? :D
-
Alox Farmer for me today - my new electrician has been in my hand all afternoon and evening clicking and snapping away as I open/close every tool, so no time for the pocket :D
-
Soldier+ 8)

-
Uuu, I like this! What did you use to colour it?
-
Red anodizing by Syph007, patinated by me

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
