Show off your Sak mod's!
-
Nice mod! The only thing I might have done differently is replace that philips opposite of the mag glass because there is a bit driver already. Then again I'm not sure what I would replace the philips with, maybe get a wenger universal wrench in there somehow.
-
8 Hours with a jewelry saw. I must of went through 30 blades. I don't have a sander or grinder. I used files and sandpaper. That was too much work.





-
Cyber Yeoman.

-
-
Yep, and with ones made of 0.025 brass that sliver is barely 1/2 a mm wide.

-
I used 18GA or 1mm for 3 and 20Ga or .8mm for the other three. Now I want a brass lined Swisschamp. That isn't happening any time soon.
-
Making 7 liners for my old toolchest took forever by hand. At least I have the bandsaw now
-
I was thinking of one of these then CNCing it for about $800.
http://www.grizzly.com/products/Drill-Mill-with-Stand/G0704 -
this one's mine

-
Alright, after some waiting on donor knives I could finally upgrade my keychain Rambler with an USB layer. And since timing allowed it, replaced the silver scales with black ones from Denmark. Close to perfect I'd say. :D

At first, I wanted to use the keyring part of the USB release. However, I carry this SAK on my bulky keychain. After the test assembly I hooked it on and noticed that the weight of my keychain alone was enough to flip the USB lock open. That's why I grinded it off and used the standard spring keychain attachment. Works a lot better now.
-
Looks awesome. The red and black are so nice. I was thinking of doing the same and grinding off that plastic keyring.
-
My second. Love this little guy.

-
Bonkers :D
Love this current mini/monster tool thing you have all got going on!

-
Thought i'd have a go at making some wooden scales for a sak i was making!!! It's harder than i thought! made a couple of mistakes, but i'll know next time!!
-
@Grumpy:
What you now need is some sanding paper. Don't worry to carve the liners a bit. That's a way to get the perfect fit. ;)My Special Mechanic now has a victorinox shield inlay, too. My second try was much more accurate. :-)
Is it finished now? Who knows, maybe some bone inlay on the back will follow.


-
That's nice
How do you do the inlay?? -
Another view:

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login