Juice pro refurb
-
Those rivets are stainless steel if I'm not mistaken. A drill press is the best thing, unless you have a way to hold the drill real steady. Although I know a trick to help if you really want to use the drill. Since the rivets are rounded and slightly above the the surface of the scales. You can slowly grind a flat area with the grinder. That way the drill bit don't wander around. Also you will probably need several drill bits as stainless is a real pain the smurf to drill.
-
Yep they are stainless. I did almost what you suggested. Ground a flat spot, then attacked with a center drill in my press. They were much harder to get apart than the SAK rivets.
-
Thanks for the help guys

-
I could do a lot of damage using my drill press :ahhh another option is very gently grinding the top of the rivet off with a dremel if you have one
Then you can punch the rivet out with a drift (you can make a drift of the right size by grinding off a nail)Just another option

-
They do seem to be one of the trickier multis to get open!
Looking forward to seeing what you do though

-
No turning back now....



-
Disassembly is the easy part. :D Now put it back together.
;)Good luck with the project and keep us updated.

-
Ya my S2 is still apart. Someday I swear I'll finish that mod. Those smurfing springs are such a pain to reassemble.
-
Hey syph, what size pivots do I need to put it back together?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

