The Raspberry Pi
-
I thought this device deserved it's own thread, so I figured I'd start one.
The discussion started in this thread:
</post/699760>Right... So...
You have this cute little computer. What kind of inexpensive peripherals are available to make it a 'real' computer?
Also, the link to the Raspberry Pi site.
http://www.raspberrypi.org/ -
i'd like to start this derailing by talking about my media center PC...
j/k

looked at picking up a RPi (Type B Single Board Computer 512MB) wasn't sure if I need anything else to get started?
-
SD cards are getting kind of ridiculously cheap, and running a build of Linux doesn't take up much RAM or processing power.
I looked at a few video options, and it seems a small 7" screen goes at under $100 these days. That's still a little pricey for what's essentially a toy. Still looking for cheap I/O options, but i don't think the system would be assembled much under $150, and that puts it in the same price range as a Kindle Fire, which IS a complete system.
Grant mentioned these as something like an alternative to the OLPC, an inexpensive and widely available computer to put in the hands of everyone.
There's also a rumored (maybe exists now?) $35 tablet from India.
EDIT: Seems it DOES exist, but checking on-line shows me that it's around $120 to get one to the U.S. -
I just realized that... I have a few old 1/2gb SD cards which have been retired from my DSLR, which has a 32gb card in it now. Also seems the powersupply for my nexus 7 meets the 5v 2a requirement, and has a usb socket for a microusb to usb cable to plug into...
maybe I should get one of their enclosures too...
-
I'm using one for a geocache. Runs off solar, hosts a website and tied to a USB powered wifi hotspot. Cacher turns it on, logs their find on the hosted page which is saved to the sd card :)
The guts:

The cache:

-
I have one that I'm setting up for my home / office phone system using RasPBX. It is going to pay for itself in a matter of months as it is replacing an old tower that is consuming electricity like it was free.
I had an old powered USB hub and a spare 16GB SD card. Ordered an enclosure with a set of heatsinks for less than $10, and a 1m USB cable for $3, off of fleabay. Borrowed a monitor from the car DVD player and a spare keyboard for the initial setup. It is now running "headless" with a web interface for all management. It has been running since early January without making any noise and no discernible heat. That is amazing.
I'm now thinking of where else I could use these neat little machines. Out in my un-heated workshop? As a home automation / security system controller? In the kitchen?
Sent from my iPad2
-
I've been a bit of a cop out with mine, it's just hung off the back of my TV. The TV is powering it, and with RaspBMC it functions as quite a nice little HTPC. Control via my phone or laptop.
-
I haven't done anything with mine yet. I was so pissed off with RS when it arrived. I put my name down pre-order and they kept sending "Coming soon" emails for about three months, then FINALLY sent me an "Invitation" to buy one and a password to get into the online store... I ordered one AND paid my money to RS Components and THEN it was another couple of months while they sent me "Your order is nearly at the top of the list" emails.
FINALLY I got an email saying "Your order has shipped"...I happened to mention this to a work colleague and he said "Oh yeah, they are cool... I bought one a couple of weeks ago."
WTF?.. Where from??
Oh, you just order them from RS Components, they sent it "Next Day"
I STILL hadn't received mine at this stage. and when it did eventually turn up it was the 256MB version and the guy from work had got a 512MB.RS Components? More like BS components. I was so gutted that I threw it in the junk drawer in the kitchen and haven't looked at it since.
</rant> -
@PTRSAK said:
I haven't done anything with mine yet. I was so pissed off with RS when it arrived. I put my name down pre-order and they kept sending "Coming soon" emails for about three months, then FINALLY sent me an "Invitation" to buy one and a password to get into the online store... I ordered one AND paid my money to RS Components and THEN it was another couple of months while they sent me "Your order is nearly at the top of the list" emails.
FINALLY I got an email saying "Your order has shipped"...I happened to mention this to a work colleague and he said "Oh yeah, they are cool... I bought one a couple of weeks ago."
WTF?.. Where from??
Oh, you just order them from RS Components, they sent it "Next Day"
I STILL hadn't received mine at this stage. and when it did eventually turn up it was the 256MB version and the guy from work had got a 512MB.RS Components? More like BS components. I was so gutted that I threw it in the junk drawer in the kitchen and haven't looked at it since.
</rant>I placed my order in July/August and got it at Christmas, from RS.
I never once recieved an email from them.
-
That doesn't sound terribly promising.
There's no excuse for poor customer service these days.
Def
Sent from a digital multitool
-
when I looked the other day there was a 1 week lead on the 256mb one, and 2 weeks on the 512mb... plus shipping to europe... guessing I'm looking at least a month from order to deliver...
-
I am waiting for my Rev B board to arrive. When it does arrive I'll be adding a few gyros, GPS and ultrasonic sensors and plugging it into this:

The RP will be running Picopter. And because of its non-realtime-ness (unless using PirateOS, which has its own issues), and because I will gladly accept any excuse to build myself more toys I'm building another slightly larger quadcopter that will run off an arduino board.
Fortunately, the more expensive sensors are interchangeable.
In case anyone is interested - the frame is an SK450 which you can pick up for very little money, Turnigy ESCs, Propdrive 28 motors, and in the picture the flight controller is a standard KK2.0 board. You can build one of these for about AU$200, including a cheapo 6ch transmitter such as the Turnigy 9x. Props cost a few bucks for a pack of four and it'll easily lift a camera such as a GoPro.
Kitting it out with GPS and a more advanced flight controller you can make it follow waypoints and return home automatically. Throw even more money at it and you can have a first person view system where you wear goggles and it feels as if you're actually in the cockpit.
As it stands, it flies beautifully, and will hopefully be even better with a more advanced RP or Arduino acting as the flight controller
-
That is an awesome rig!
Def
Sent from a digital multitool
-
oh, another poor bloke with SAKs and R/C gear eating up the money...
I have a couple of quads, three or four planks (fixed wing models) and currently 5 Heli's Trex250 FBL, Trex450, Trex 500PRO, Trex 500 FBL and Trex600.
Who needs a high maintenance woman when you fly R/C Helicopters? -
@PTRSAK said:
oh, another poor bloke with SAKs and R/C gear eating up the money...Correction - soon to be poor if I continue to do this! :)
And I thought my divorce was costly. At least I am enjoying this, and I can stop anytime. No, really. Honest. Any time!
I have a couple of quads, three or four planks (fixed wing models) and currently 5 Heli's Trex250 FBL, Trex450, Trex 500PRO, Trex 500 FBL and Trex600.
Not done any fixed wing stuff, but I have played with a Twister 400 fixed pitch helicopter. It was... challenging, but great fun. The quads appeal because I can actually make them myself from any old bits I've got lying around and fix most crash damage with a bit of duct tape and cable ties. And they're relatively easy to fly.
That said, I'd love to have a go with a few planks. Had a whale of a time a few weeks ago watching people blatting around with big scale EDF models at the local RC flying club.
Who needs a high maintenance woman when you fly R/C Helicopters?
I have one of those too. You'd think I'd have learned my lesson after the ex, but at least this one is more understanding, and independently financed, so that's a bit of pressure off!
-
I love the idea of the quads. My boss has a Parrot AR Drone that he has told me I'm welcome to use any time, but it seems a bit pricey a toy to take a chance on breaking. :ahhh
Def
-
@Grant Lamontagne said:
I love the idea of the quads. My boss has a Parrot AR Drone that he has told me I'm welcome to use any time, but it seems a bit pricey a toy to take a chance on breaking. :ahhhDef
The Parrots are lots of fun, and they're reasonably crash proof - they have pretty aggressive stabilisation and safety features. But as you note they're quite expensive - the quad in my picture cost AU$140 less to get into the air than an AR Drone, and being bigger with more powerful motors can lift more. You can get ready to fly ones for a bit more.
Of course, you lose the nice 'control from your phone features', and accordingly flying will be a bit more involved unless you automate it a bit as I am intending to, but on the other hand, parts are plentiful, cheap and you can mod it to do lots of things. I am presently fighting with my inner sensible side to stop myself buying a motorised gimbal mount for the GoPro...
-
Is there a decent kit you could recommend for a quad that would lift a GoPro? I'm not terribly skilled when it comes to electronics, so anything more than plugging part A into part B is a bit beyond me.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login