SAK Sheaths?
-
Aha! Did a Google search and found a Sergemaster posting. Wonder if Firefox has a MultiTool.Org search engine add-on??
@sergemaster said:
Amici,
Although I technically could have posted the following images in a new thread, I decided not too since it still falls into the realm of what Smaug originally posted.What you see is the latest leather pouch offered by Wenger, this is a large that I currently use to carry my evowood S557. When it arrived, it came with a beautiful natural finish which was quite acceptable if you like that type of style of leather. But being the wild and crazy guy that I am, I had to apply several coats of leather darkening solution to of course darken it up a bit, followed by copious amounts of olive oil to not only further darken the leather, but also soften it up as well.
I have inserted through the slots in the back, a portable strop to illustrate the size of the belt that cane be worn if anyone here decides to purchase one for their Wenger.
I find it very wear-friendly as well as quite sharp looking. This current configuration is now my official bush carry supplemented by a Folts Minimalist around the neck and outta sight.
-
Here's a leather sheath, I built for my Vic Craftsman. I modded the large flat screwdriver to fit a Gerber magnetic bit holder shown in the photo.

-
@Randyc1974 said:
Here's a leather sheath, I built for my Vic Craftsman. I modded the large flat screwdriver to fit a Gerber magnetic bit holder shown in the photo.
Does anyone have a link to the Gerber bit adaptor? I've looked on Amazon and they have a bit holder but I want to make sure the adaptor comes with it. Great idea Randy!
-
Does anyone know of any of the Voctorinox Swiss Army Zermatt X-Large Pouches will fit the Wenger Evo S557? Had noticed these larger pouches come with steels.

Probably too long... oh well, guess will go with the large square Wenger 805 and darken it with some mink oil with silicone.
-
@Xelkos said:
Does anyone know of any of the Voctorinox Swiss Army Zermatt X-Large Pouches will fit the Wenger Evo S557? Had noticed these larger pouches come with steels. :tu:Probably too long... oh well, guess will go with the large square Wenger 805 and darken it with some mink oil with silicone.
Says here;
http://www.knife-depot.com/knife-433502.html
That it fits the follow Vic models; Craftsman, CyberTool 34, CyberTool 41, CyberTool Lite, Handyman, Hunstman Lite, Ranger, SwissChamp, Voyager Lite and Traveler Lite.
How do they compare in size with the S557?
-
Dug up something on the Zermatt X-Large Pouch, and even people with the larger knives said the fit is very tight. They would have to struggle getting their knives out.
Done went ahead and ordered the Large Wenger 805 pouch in a natural color, along with two mini corkscrew drivers for the Blackout 63 & Evo S557. Wonder why Wenger never used the hidden pin feature?

May not have needed the leather pouch, but I wanted to help protect the scales.Wenger 805 Large Pouch

Note: 804 is the slimmer one, for 4 layer knives/tools.
-
Here's a leather sheath, I built for my Vic Craftsman. I modded the large flat screwdriver to fit a Gerber magnetic bit holder shown in the photo.

Does anyone have a link to the Gerber bit adaptor? I've looked on Amazon and they have a bit holder but I want to make sure the adaptor comes with it. Great idea Randy!
Sog do a similiar item
-
The Wenger 805 large sheath came in from Swiss Knife Shop. Treated it with a few coats of Tung oil first, followed by Kiwi Mink oil (mink oil, silicone, and lanolin). There's a bit of slack space in there which will be taken up for when I get a far better lanyard attached to it. :D

Here's a before photo.

-
Another photo showing the rattlesnake knotted lanyard slid in beside the S557. Hook attached to the keyring for safety.

And what the lanyard I put together a bit ago for the Wenger S557.

-
Fellow Sirs,
Searching the forum for the theme, this topic was the best for my questions... If there is another one, please, excuse me.
I carry my old Victorinox Outrider in that little pocket from my jeans (right side over the front pocket) and, now with all the scratches, almost everywhere.
All other SAKs with no scratches go inside a molle, protected by a hachimaki (that japanese head handkerchief). Pictures below...
I want to buy some sheaths for my SAKs. That Victorinox green one for the 111mm; Victorinox leather for the 58mm and 91mm and, if it fits (it is a question here) some rawhide ones made in Brazil, not Victorinox. Also that pistol magazine pockets for belt.
The important question is...
Do they make scratches on celidor, alox and nylon scales???
I worry about this, because I collect SAKs but I want to use them without making scratches on the scales. The new ones (not necessarily new, like old Victorinox and Wenger Soldiers) must remain like new, for the collection, and usable too, for me.
I thank for the answers!!!
Greetings from Brazil


-
And that's the point when you start to buy back-ups... :D
In my opinion, there's no such thing as a user that has to remain as new, or a NIB SAK that was a user in the past.
You can try as hard as you want, but cellidor will scratch when handled, and I'm talking handled, not even used.
I noticed that the cellidor scales even developed small scratches from handling them when I took pics from them, nothing more (the old style Wenger scales are the worst in my opinion,so easily scratched).
So now I use a soft "anti dust" rag to handle my NIB SAKs while taking pics. And on the rare occasion that one of these SAKs goes along for a hike, it is stored in a soft rag, inside a larger pouch, and I will always carry a user on a belt hanger in my pocket.
I would suggest that, instead of spending money on different types of sheaths, you get a Swisschamp or a Cybertool L, put it in your pocket and don't mind if it develops scratches (my trusty Swisschamp is full of them, and it's one of my most loved SAKs, just because we've been through so much together).
But hey, that's just me, I'm that crazy... ;)
And to answer your question, the "new style" vinyl sheaths are quite soft on the inside, softer than the leather or the older leather/vinyl ones in my opinion, but still, they will scratch
I'm talking about the one on the left, that's the softest (but most fragile one in my opinion), the one on the right is quite soft and feels much sturdier, and the one in the middle is very sturdy, but feels kinda rough on the inside, just my humble opinion.










-
@Top-Gear-24 said:
And that's the point when you start to buy back-ups... :DIn my opinion, there's no such thing as a user that has to remain as new, or a NIB SAK that was a user in the past.
You can try as hard as you want, but cellidor will scratch when handled, and I'm talking handled, not even used.
I noticed that the cellidor scales even developed small scratches from handling them when I took pics from them, nothing more (the old style Wenger scales are the worst in my opinion,so easily scratched).
So now I use a soft "anti dust" rag to handle my NIB SAKs while taking pics. And on the rare occasion that one of these SAKs goes along for a hike, it is stored in a soft rag, inside a larger pouch, and I will always carry a user on a belt hanger in my pocket.
I would suggest that, instead of spending money on different types of sheaths, you get a Swisschamp or a Cybertool L, put it in your pocket and don't mind if it develops scratches (my trusty Swisschamp is full of them, and it's one of my most loved SAKs, just because we've been through so much together).
But hey, that's just me, I'm that crazy... ;)
And to answer your question, the "new style" vinyl sheaths are quite soft on the inside, softer than the leather or the older leather/vinyl ones in my opinion, but still, they will scratch
I'm talking about the one on the left, that's the softest (but most fragile one in my opinion), the one on the right is quite soft and feels much sturdier, and the one in the middle is very sturdy, but feels kinda rough on the inside, just my humble opinion.
Dear Sir Top Gear,
You gave me, indeed, top ideas here!!! And thanks a lot for the work that you had taking the pictures etc!
You are right when you say that it is the point when I have to start to buy backups…
Cosidering that, after start to collect Victorinox SAKs, I avoid using the new ones because of the scratches; the fact that is really impossible to avoid them; the trouble that it is to do, here, in my own way, the same procedure that you do with the soft "anti dust" rag; my hate for scratches, scars and other "battle marks" and, at the same time, the pleasure to see this signs of use in my SAKs; the urge I feel to collect and use them etc., etc… The panacea is the backup!
The panacea is the backup! The panacea is the backup!! The panacea is the backup!!! (echoes…)
Especially for the cost of the sheats, that are something about 40% of the price of a brand new. Here in Brazil, the Victorinox "new style" vinyl sheaths costs about 40% of the price for a Trekmaster OH considering that it has the average price between an Alpineer and a WorkChamp, it is much better to buy a backup than a sheath.
Even though I do not have to buy a sheath for each SAK, the delight of having a backup, at least for the ones that are retired therefore harder to get brand new ones, worhts the price.
The idea of having two SAKs to use is very good! But, I need to use them all… Is it a kind of disease??? If so, now, it is too late...
Greetings from Brazil!

-
**(...) **P.S. It is funny that one question leads to several thoughts and considerations...
::)
It is easyer to save some money in the backups for the SAKs that have colours or images etc. because I can have only one to back up several. For example the Wenger Soldier that I bought can backup the one that I have (both from the same year), the 94 Victorinox soldier and others, that I plan to buy (Pioneer, Pioneer X in some special edition colours etc)
. The same with the red Cadet 2018 edition, that I have (and did not use yet) and, for its backup and the other colours that I will buy, I can get a Cadet with the traditional silver colour.I will buy the new style green Victorinox sheath to put the Outrider, that is the one that I use 90% of the time. As you described it, this is the sheath I need and, eventually, protected by a soft cloth, it can serve other 111 mm SAKs.
.
At least to me, for the fact that I do not have the illusion of completeness for anything, I feel good to collect SAKs from different sizes and colours for different models.
I truly expect that buying this sheath will not cause a sheath collection urge. I am (almost :ahhh) sure it will not. ???
Thanks again Sir Top Gear!
Greetings from Brazil!
-
@RicardoBorges said:
...
I truly expect that buying this sheath will not cause a sheath collection urge. I am (almost :ahhh) sure it will not. ???Thanks again Sir Top Gear!
Greetings from Brazil!
Collecting sheaths, now that would be crazy...
Spoiler:




;)
-
Wow some great looking sheaths there Eric

-
@Top-Gear-24 said:
Collecting sheaths, now that would be crazy...Spoiler:




;)


:ahhhAnd that's the point when you start to buy back-up sheaths...

... -
MiniChamp and Crochet sheath from Mamma Cacilda!!!
:D





-
@RicardoBorges said:
MiniChamp and Crochet sheath from Mamma Cacilda!!!:D


Now, I do like that. I spent a lot of internet time, last week, trying to find a Victorinox pouch for a MiniChamp. Finally had to modify an old Tandy Leather sheath, to fit.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

