Juice Club
-
Hi all
been reading the forum for a few days and have a question about the XE6. Hope it is ok to post the question in this thread.I got an XE6 a week or so ago. Generally happy with it, but the straight scewdrivers were very stiff if not impossible to open by hand. After reading around it became apparant that this is a common problem, but some are worse than others. As I bought it from amazon, I decided to take a gamble on a replacement.
The new one is a bit better on the drivers - but the pliers are awful compared to the original. They catch a bit when the wire cutter jaws first engage, but then catch again and have maybe 0.5mm gap between the end of the jaws unless you squeeze very hard.
I had pretty much decided to keep the original (which have loosend up a bit with some repeated working) but gave them a good comparison first. The scissors are also noticeably looser on the newer one, but still cut paper ok.Now for my question... I noticed a difference in the writing on the backs of the tools. The original has "LEATHERMAN (R) PAT PEND" whereas the newer one has "LEATHERMAN" in a larger outline font if that makes sence. Sorry don't have a photo at the moment.
Does anyone know when this change occurred? I have read of people referring to date codes, but can't see any on mine. Where should I be looking?
At the moment I have them both and need to decide which one to keep and which to return.
Sorry for the lengthy post.
I will try and get a piccy up later and join the owners club properly.
Thanks. -
Got my XE6 today and not real happy with access to some of the tools. And some drivers are hard as hell and uncomfortable to pull out. Lack of quick access sucks. Would rather have another Wave instead for the price, this one is going back. Guess I am not ready for the Juice club..... :(
-
@stang87 said:
Got my XE6 today and not real happy with access to some of the tools. And some drivers are hard as hell and uncomfortable to pull out. Lack of quick access sucks. Would rather have another Wave instead for the price, this one is going back. Guess I am not ready for the Juice club..... :(Lubrication is the key. Work the tool parts in an out. The back springs are tough, and when you get them lubricated well enough they fly out - often leaving snake bites. So you learn to open the drivers from the side.
Snake (Love) Bites

-
date codes are hard to find on the Juice aren't they Mickey? :D Have a look on the liner beside the Phillips and the flat drivers. They are hidden from view by the drivers when they are closed. So open up the drivers, look down into the channel and the four digit code will be on the 'wall' of the channel. As you have done a bit of reading you'll likely know this but the four digits represent month and year; so 0313 would be March 2013. :) Hope that helps.
-
@Gareth said:
date codes are hard to find on the Juice aren't they Mickey? :D Have a look on the liner beside the Phillips and the flat drivers. They are hidden from view by the drivers when they are closed. So open up the drivers, look down into the channel and the four digit code will be on the 'wall' of the channel. As you have done a bit of reading you'll likely know this but the four digits represent month and year; so 0313 would be March 2013. :) Hope that helps.Thanks for the reply.
I did start a new thread, with photos, to avoid de-railing this one.
The older one is quite easy to see as it happens and is 0611 on both sides. The newer one is VERY faint, but I think it might be 0311 on one. Still trying to decide which one to keep, but I think the newer one with the sticking pliers are going back.Here are some pics of my (temporary) juice collection.



-
@Metal Mickey said:
date codes are hard to find on the Juice aren't they Mickey? :D Have a look on the liner beside the Phillips and the flat drivers. They are hidden from view by the drivers when they are closed. So open up the drivers, look down into the channel and the four digit code will be on the 'wall' of the channel. As you have done a bit of reading you'll likely know this but the four digits represent month and year; so 0313 would be March 2013. :) Hope that helps.
Thanks for the reply.
I did start a new thread, with photos, to avoid de-railing this one.
The older one is quite easy to see as it happens and is 0611 on both sides. The newer one is VERY faint, but I think it might be0311**0312 ** on one. Still trying to decide which one to keep, but I think the newer one with the sticking pliers are going back.Corrected my earlier post, it should have said 0312 for the newer one.
baja820, if that photo was for me - thanks.

Having two I can see where the marks are one one of them which is quite easy to read. It is at least as well defined as in your photo. The other one is much, much fainter and almost looks like it was an attempt at laseretching or something instead of stamping.
-
I know I'm being lazy in not reading back but I have an XE6 (says tool not USA) which doesn't have the date codes in the above place

Where else might they be hiding if at all?
-
Underneath the screwdrivers.
-
Ah, sneaky!

0302
-
KF4 0801 on both handles :D
Mine were on then pliers side of the handle.
-
I didn't realize they had date codes
My S2 has 0111, the KF4 has 0601 -
The Juice KF4 being my favorite juice....I didn't think it could get any better. Then I got one in solar yellow. ;D
Sent from my Galaxy Note II
-
@wndrstrck said:
The Juice KF4 being my favorite juice....I didn't think it could get any better. Then I got one in solar yellow. ;DSent from my Galaxy Note II
Mine too - bloody brilliant tool

I managed to pick up a grey one too, and mostly carry that one :)
-
The Juice KF4 being my favorite juice....I didn't think it could get any better. Then I got one in solar yellow. ;D
Sent from my Galaxy Note II
Mine too - bloody brilliant tool

I managed to pick up a grey one too, and mostly carry that one :)
Me too

I am working on polishing the grey one!
-
Polishing how, making it shiny silver with the paint off? :)
-
Ah, yes I can see that looking rather nice :D
-
It was in pretty good shape scale wise...I just didn't like the company logo on it. Besides I love shiny things ;D
Sent from my Galaxy Note II
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
