Got Paracord?
-
Look at the post above yours. ;) Ashley does great work.

-
Done asked. She says she don't know the rattlesnake knot yet. :(
Wonder if there is a paracord color that's outback sand colored? :o Like that sand color on my avatar's picture.
Edit: Seen this Leopard Camo (color) one on eBay, but not the type of knot was wanting. Only had black, or that horrid Home Depot junk. Took some tries, going back when I lost track, till I got the rhythm. Keeping it tight was another story. Once I got to a set size had went back to tighten with the Climber's hook till there was enough slack. Guess it is good enough for the first try. Will finish it off with a friendship knot - too bad couldn't tuck the end of that through to made a double end. - Baby steps. :D Also grabbed the pliers from the S557 that this lanyard is going to attach to. Will have to do till I find some more colorful paracord to work with. Interesting knot, but a few tries and rewinds I got it. Back leg, wrap, tuck under to left leg, wrap, **then** middle, wrap - repeat. That was what was getting me. No bead to stick up top yet, though I did have an aluminum collar around here. Think I have some silky oak scraps I could fancy a bead out of. Perty happy that I got it. Sorry for being windy. :D
-
I believe I have some of that color maybe in my scrap box. If you want I'll look into the rattlesnake knot asap and let you know. I've been wanting to learn it but I've been so busy. I work 5 days a week, sell at gun shows on weekends so limited free time. I also have a couple other projects people have ask about.
Ash's mobile on the move.
-
Ashley, no hurry at all, really. Just like to support the local talent rather than end up hog-tying my thumbs. :D You sent a couple of PMs in the past so why I had asked, as didn't see a rattlesnake version. Wanted a thicker and less common lanyard was all.
I threw one together between projects. The bottom side, where the cord continues, not sure it is supposed to look like that. As such I tossed in a ABOK 782 in there to keep the stands together. Looks better than the lanyard/friendship knot that I had in there.
Could not find a knot to tie the gate hook on with, so improvised with what I think is a square knot. Is better than what I was using beforehand.Have something that works for now. Lacking the talent for uniform fit and looks, but open to suggestions and critique on this one I put together tonight. Edit: Added a photo of the cord end that bothers me; does it look right?


Carved one Australian silky oak bead, the other one broke. Was looking at the paracord and thought, hmm... add a bead on each segment. But I dunno, what do you folks think? Or putting the bead between the rattlesnake knot & the ABOK 782??
-
White man balls?


Ash's mobile on the move.
-
Yea blue means someone is hurting... Back to paracord.
Ash's mobile on the move.
-
Is that one of them Indian ball knockers that you move up and down and makes clapping sounds? Hey, you know... there are those musical balls that Asians, and others into holistic healing, would move around their hands and made music. If there were some small enough you could make musical monkey ball lanyards. :D
Chinese Exercise balls, musical balls, or boading balls. Thought I would throw that in there.

-
Purple/black, pink, and white keyring.

Ash's mobile on the move.
-
Hi All,
Does anyone have a step through of making these? A link to a website or such would be great.

Also I'm looking for instructions on how to make a lanyard for my ID badge with around 4" of weave above the connector then back to a single loop to go over my head. Again a link would be great.
Searching for these items is a nightmare as I dont know what there actually called and google brings up trillions of results!
Cheers,
Andy
-
Similar lanyard design to this but not as thick on the weave.


Andy
-
@Andi licious said:
Hi All,Does anyone have a step through of making these? A link to a website or such would be great.

Also I'm looking for instructions on how to make a lanyard for my ID badge with around 4" of weave above the connector then back to a single loop to go over my head. Again a link would be great.
Searching for these items is a nightmare as I dont know what there actually called and google brings up trillions of results!
Cheers,
Andy
Nice photo Andy :D
The red knot under the loop is a matthew walker knot ( two strand) see here - http://www.atwoodknives.com/home/16390018.php
See here for how to make the box weave http://www.lighthound.com/Square-Weave-Paracord-Lanyard_ep_40-1.html
for the knot at the end google "completion stitch" or see here - http://www.boondoggleman.com/prj_completion.htm
The ones above were made short as the customer wanted them for zip pulls.
Hope that helps
-
I will check out those links when I get to my wifi!
Gotta bit of time, plenty of green & black paracord and lots of sun to sit in so I might as well make something!
Cheers, I'll post up some pics when iv done them!
Andy
-
He's got you well covered there Andy... good luck with it

If you get more adventurous and want to learn other stuff too, I highly recommend a read of our friend Stormdrane's blog: http://stormdrane.blogspot.com
-
Hi guys,
Knocked this up today, first try at anything like this so I'm happy for starters!
Ill have a play round tomorrow and see what else I can make!
Andy

-
Great start!

Ash's mobile on the move.
-
Was multitasking again, and altered the rattlesnake & ABOK 782 knot lanyard from my previous attempt.
Had backed out one end, tucked it under, and my heart skipped a beat when I lost a link. Put the silky oak wooden bead between the the two knots, which I personally think looks a lot better. Finished the lanyard off with a gated snap with a version of the ABOK 782 (close enough) and tucking the two ends out through the same loop. Singed, and used my Zippo to cold press the melted ends down.
What do you think??
One side of the lanyard

Other side of the same lanyard

Just redone the same lanyard has posted above. Lanyard is slightly shorter... as I have a time adjusting the positioning of the knots. If had more cord would of done another ABOK 782 in the slack space before finishing off the lanyard. Then it would have looked better, and still be long enough as a workable safety lanyard - usable while still snapped to the keyring or another contact point.
-
Looks fine to me. I honestly love a good challenge and think to myself, "man, I just did that" and show it off with pride. So, show it off with pride!¡! Knotting/ weaving isn't something that just anybody can do, takes a little skill, as I'm sure that you can attest to.
Sent from Endor via Schlapatok
-
Oh yes, I kept losing track of that 782 knot, trying to snug it up. Was listening to Joel Osteen on believing you can, and when he was talking about obstacles I was looking at one in the knot. Said just to believe, and to have faith, and I rolled the knot over and gave a tug, there it was! :D
People that can think several steps ahead and have great dexterity (AND PATIENCE) probably do a lot better at this.
-
Nice work, looks good to me, love the bead.
You're spot on there, it's not just making knots, it's working out how to make the knots that takes time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
at least there not blue
lol JR