Alox Yeoman
-
That's looking very good! -
This is powder coated?
Looks pretty rough. -
blade prep

-
Ewwww...be careful around that blade edge! Them things are sharp!

-
Your etch masking does look like the aftermath of a horrible accident there Rick... :ahhh :ahhhGood to see the depth of modding that you're getting in to. Some real nice gear that you're turning out there.

-
Nice Rick. Can explain that process again please?
-
Grand Canyon panorama. :D
-
PCB etchant from radio shack and distilled water. I mixed 1:3. nail polish whatever you want shiny and the edge. Especially the edge. All pivots as well. This one I dipped for 45 min. Remove nail polish. Green scotch pad to get the tone you want. It will be very dark coming out of solution. I repeated this process 3 times for a layered look.
This guy here explains the process.
Acid Etching the Knife Blade TutorialWhat really would interest me is photo etching into the metal. Next process I hope to find some info on.
Build is moving forward. Scales/liners have been drilled. Now a wait for the remaining parts to put this guy together.
Stay tuned.
-
hmm, wonder if the laser printer toner transfer trick would work?

-
I really like that blade

Really interesting idea :)
-
That blade looks awesome.
The ethcing process looks fairly straight forward as well. Very cool.
The only thing I am thinking about is how this affects the rust resistance of the steel? -
Progress. Many thanks to Syph, Tattosteve and Ptrsak for basically building this for me via messages. Fitting the mag glass

-
Rough draft. Still needs final touches.

-
Rough draft? If it were an essay in English class, I'd give it an A.

Better yet, send it to me and I'll grade it for you.

Can't really miss with the black alox and red shield...I've yet to see a knife with that setup that I don't like. Good job.
-
Looks good to me. Are you going to get brave and counter sink the screws flush? Since you might ask what to use for that, here you go! :D
I use that before I reanodize, but Ive used it on stock vic scales too. If you go slow its doenst mess up the coating.
The other option is to spin the screws on a belt sander, while holding them in a cordless drill and reduce the head size so they sit flush. That was my old way of doing it before I got tired of manually grinding 6 screws per sak mod. :D
-
found one at harbor freight I can use with a 1/4 hand driver so I can take it nice and slow. I gave it a go on some throw away cadet scales and it was perfect.
THANK YOU very much for the info though. This build would not have been possible without the help of this community.
-
Nice work. That's zeroing in on the perfect urban EDC SAK of you ask me...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


