The Splash - LM Squirt Mod
-
@50ft-trad said:
I must be honest, I'm not grasping this at the minute ... though I might just be having a dense moment ::) I look forward to you getting the actual articles so the penny will drop

Just for you Al, some pics of how the parts fit into the Squirt.
Cheers mate
Scissors rest is all clear now .... so the other part is an infill which takes the place of one of the smaller tools and acts as a carrier for the tweezers and pin, yeah? I think the "in place of another tool" is the bit that was missing in my mental image -
@50ft-trad said:
Cheers mate
Scissors rest is all clear now .... so the other part is an infill which takes the place of one of the smaller tools and acts as a carrier for the tweezers and pin, yeah? I think the "in place of another tool" is the bit that was missing in my mental imageYah. It's paired with the eyeglass driver exclusively.
-
Nice job on all you've done but I don't care for the red...

-
Nice job on all you've done but I don't care for the red...

Me neither. I just stripped it off and they feel a lot better now.
:D

-

Always worth trying stuff like colouring, especially if it's not a total pain to get it off again :D
-
Some taxonomy images.

Left to right:
Standard ps4, user Splash, original Splash, Hex Driver Splash, plastic scale Splash and the current mini TTi Splash.

-
The red didn't do it for me. An hour bath in acetone returned the scales back to their stainless glory. The 'frames' have been wet sanded to 400 for a nice flush finish. I think I am going to get another set done up, I like the finish and I really want to build a crazy 6 layer one mirroring the load out of a normal Charge TTi (yah...saw too!)


-
I always look forward to your updates Eric
You're a mad scientist!¡! I love the finish on this, though the red was quite nice too. Looks like the Charge's little brother 
-
@stealth007s said:
I always look forward to your updates Eric
You're a mad scientist!¡! I love the finish on this, though the red was quite nice too. Looks like the Charge's little brother 
Thanks Terry!
My next step is to get some Tritium into these scales...and some model notation (that's MQB, Metro's Q-Branch)

-
@Metropolicity said:
.....and I really want to build a crazy 6 layer one mirroring the load out of a normal Charge TTi (yah...saw too!)Keep up the good work, we all enjoy watching you have creative fun with your new MTs (you've gone way past what I class as "mods" to existing tools, now they are just raw material for your flights of fancy)

-
Nice to see a linear progression - these things evolve so fast in your bat cave! :ahhh
-
Ordered the new SPLASH and MQB branded scales with Tritium tube openings, fingers crossed the new details pass the gateway for small features (sometimes they are too small and they won't pass the check point).
My plan is to make a Scissor based SPLASH and a wirestripper based SPLASH.
-
No emails from Shapeways telling me the file's weird. Looks like we will be seeing the words SPLASH and MQB on the next scales.
More importantly, you'll see them on a tightly kerned, bold Helvetica. :D
-
What if....(I'll need to start a new thread...)




-
I was hoping youd start the mental gears turning on how to utilize dual plier heads. When you first started this thread my mind was trying to figure out how to fit the scissor and plier heads in one tool... I think there are few ways to try it.
And also... cool and keep it up! :D
-
@Syph007 said:
I was hoping youd start the mental gears turning on how to utilize dual plier heads. When you first started this thread my mind was trying to figure out how to fit the scissor and plier heads in one tool... I think there are few ways to try it.And also... cool and keep it up! :D
One way could be making a double stack in the other direction (thickness wise) but I would end up being WAY too think, almost comical.
This at least will be the length of pen..

-
You evil man Eric
I now fear for the long term future of my Gerber Vise and Splice which weren't doing a great deal. The benefit of that is they come with better (IMHO) blades than the Squirts. I'm just glad I'm WAYYYYY too busy to actually doing anything about the crazy thoughts you just put in my head .... particularly as they involve components from other manufacturers due to the lack of variety of tools between the two AND the difficulties of filling the "inner" short tool slots.HINT: If the mini driver on the Vise/Splice was moved onto the long fixed arm on your mock up, that would leave enough channel length for a 91mm Victorinox file, and the slightly longer Phillips with file would probably leave enough room for an 84mm saw (the distance from back springs to pivots would need carefully condidering though). A Vic 93 awl could possibly sit in a long tool slot on a short arm with the lip riding inwards instead of outwards probably giving enough clearance beneath for the action of the springs, and although a Vic nail file could possibly fill the final short armed long slot nicely, that would leave the tool short of a flat bladed driver and bottle opener. Of course a pocket clip for pen type carry would also be a necessity

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


