The Splash - LM Squirt Mod
-
Nice to see a linear progression - these things evolve so fast in your bat cave! :ahhh
-
Ordered the new SPLASH and MQB branded scales with Tritium tube openings, fingers crossed the new details pass the gateway for small features (sometimes they are too small and they won't pass the check point).
My plan is to make a Scissor based SPLASH and a wirestripper based SPLASH.
-
No emails from Shapeways telling me the file's weird. Looks like we will be seeing the words SPLASH and MQB on the next scales.
More importantly, you'll see them on a tightly kerned, bold Helvetica. :D
-
What if....(I'll need to start a new thread...)




-
I was hoping youd start the mental gears turning on how to utilize dual plier heads. When you first started this thread my mind was trying to figure out how to fit the scissor and plier heads in one tool... I think there are few ways to try it.
And also... cool and keep it up! :D
-
@Syph007 said:
I was hoping youd start the mental gears turning on how to utilize dual plier heads. When you first started this thread my mind was trying to figure out how to fit the scissor and plier heads in one tool... I think there are few ways to try it.And also... cool and keep it up! :D
One way could be making a double stack in the other direction (thickness wise) but I would end up being WAY too think, almost comical.
This at least will be the length of pen..

-
You evil man Eric
I now fear for the long term future of my Gerber Vise and Splice which weren't doing a great deal. The benefit of that is they come with better (IMHO) blades than the Squirts. I'm just glad I'm WAYYYYY too busy to actually doing anything about the crazy thoughts you just put in my head .... particularly as they involve components from other manufacturers due to the lack of variety of tools between the two AND the difficulties of filling the "inner" short tool slots.HINT: If the mini driver on the Vise/Splice was moved onto the long fixed arm on your mock up, that would leave enough channel length for a 91mm Victorinox file, and the slightly longer Phillips with file would probably leave enough room for an 84mm saw (the distance from back springs to pivots would need carefully condidering though). A Vic 93 awl could possibly sit in a long tool slot on a short arm with the lip riding inwards instead of outwards probably giving enough clearance beneath for the action of the springs, and although a Vic nail file could possibly fill the final short armed long slot nicely, that would leave the tool short of a flat bladed driver and bottle opener. Of course a pocket clip for pen type carry would also be a necessity

-
Witchcraft :ahhh
-
@50ft-trad said:
You evil man Eric
I now fear for the long term future of my Gerber Vise and Splice which weren't doing a great deal. The benefit of that is they come with better (IMHO) blades than the Squirts. I'm just glad I'm WAYYYYY too busy to actually doing anything about the crazy thoughts you just put in my head .... particularly as they involve components from other manufacturers due to the lack of variety of tools between the two AND the difficulties of filling the "inner" short tool slots.HINT: If the mini driver on the Vise/Splice was moved onto the long fixed arm on your mock up, that would leave enough channel length for a 91mm Victorinox file, and the slightly longer Phillips with file would probably leave enough room for an 84mm saw (the distance from back springs to pivots would need carefully condidering though). A Vic 93 awl could possibly sit in a long tool slot on a short arm with the lip riding inwards instead of outwards probably giving enough clearance beneath for the action of the springs, and although a Vic nail file could possibly fill the final short armed long slot nicely, that would leave the tool short of a flat bladed driver and bottle opener. Of course a pocket clip for pen type carry would also be a necessity

Can't be done. The pivots needed to keep the plier/scissor back spring in check interfere with anything longer than the existing Squirt tools.
Speaking of gerbers. I bought a whole bunch of shortcuts, clutches and bear tools and took some apart. The mechanisms are similar but what really is the kick in the pants is the pivot size is a very odd size.
-
I ordered a set of alumide double long scales. In 10 days we will see how good/bad, cumber/awesome this idea is.
It will call for another thread to be started.
-
Is this what you were thinking would be too wide? If the fold out handle parts were half as thick as the middle section is 'seems' like it would work. But I guess it would end up being a square bar when folded...

-
@50ft-trad said:
You evil man Eric
I now fear for the long term future of my Gerber Vise and Splice which weren't doing a great deal. The benefit of that is they come with better (IMHO) blades than the Squirts. I'm just glad I'm WAYYYYY too busy to actually doing anything about the crazy thoughts you just put in my head .... particularly as they involve components from other manufacturers due to the lack of variety of tools between the two AND the difficulties of filling the "inner" short tool slots.HINT: If the mini driver on the Vise/Splice was moved onto the long fixed arm on your mock up, that would leave enough channel length for a 91mm Victorinox file, and the slightly longer Phillips with file would probably leave enough room for an 84mm saw (the distance from back springs to pivots would need carefully condidering though). A Vic 93 awl could possibly sit in a long tool slot on a short arm with the lip riding inwards instead of outwards probably giving enough clearance beneath for the action of the springs, and although a Vic nail file could possibly fill the final short armed long slot nicely, that would leave the tool short of a flat bladed driver and bottle opener. Of course a pocket clip for pen type carry would also be a necessity

Can't be done. The pivots needed to keep the plier/scissor back spring in check interfere with anything longer than the existing Squirt tools.
Speaking of gerbers. I bought a whole bunch of shortcuts, clutches and bear tools and took some apart. The mechanisms are similar but what really is the kick in the pants is the pivot size is a very odd size.
Yep, the inner pivots would need to be peened to a full length liner to create the clearance, and custom full length backsprings would be needed too
-
@50ft-trad said:
@50ft-trad said:
You evil man Eric
I now fear for the long term future of my Gerber Vise and Splice which weren't doing a great deal. The benefit of that is they come with better (IMHO) blades than the Squirts. I'm just glad I'm WAYYYYY too busy to actually doing anything about the crazy thoughts you just put in my head .... particularly as they involve components from other manufacturers due to the lack of variety of tools between the two AND the difficulties of filling the "inner" short tool slots.HINT: If the mini driver on the Vise/Splice was moved onto the long fixed arm on your mock up, that would leave enough channel length for a 91mm Victorinox file, and the slightly longer Phillips with file would probably leave enough room for an 84mm saw (the distance from back springs to pivots would need carefully condidering though). A Vic 93 awl could possibly sit in a long tool slot on a short arm with the lip riding inwards instead of outwards probably giving enough clearance beneath for the action of the springs, and although a Vic nail file could possibly fill the final short armed long slot nicely, that would leave the tool short of a flat bladed driver and bottle opener. Of course a pocket clip for pen type carry would also be a necessity

Can't be done. The pivots needed to keep the plier/scissor back spring in check interfere with anything longer than the existing Squirt tools.
Speaking of gerbers. I bought a whole bunch of shortcuts, clutches and bear tools and took some apart. The mechanisms are similar but what really is the kick in the pants is the pivot size is a very odd size.
Yep, the inner pivots would need to be peened to a full length liner to create the clearance, and custom full length backsprings would be needed too
Hmmmmmm.
-
..... although I have just realised something .... I need some mini torx drivers now

Can you remember what the pivot size was?
-
OK cheers
Hopefully the Vise and Splice won't be too obscure ::) -
Yep, that's what I was going to do 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login









