Saw test
-
Thank you for that

I have some of the the same tools myself (or similar) and my OHT would definitely be 1st choice for it's saw

-
I think the Leatherman OHT's saw would be a bit of a joke in comparison to the Vic OHT :tool:
-
[quote author=Lynn LeFey link=topic=37422.msg601471#msg601471 date=1336593001]
A brief saw test.Do u have this test on video? I'd like to see it if u do. Thnx 4 sharing
-
Using the LM Wave Saw. Worked fantastic on a 3/4 hardwood (poplar) dowell.


-
No, no video version, sorry. Watching me sawing an old branch sounds pretty horrifying to me as a video.
"And here I am..."
Vfff, vfff, vfff, vfff..... vfff, vfff, vfff, vfff..
(Fast forward 4 minutes)
"And that was the Berkley. Pretty slow. Let's try the next."
Vfff... Vfff... Vfff...
(Fast forward ten minutes)
Vfff... Vfff.... Vffff...
(Pause video, go get beer... drink beer, read a few e-mails, surf I-Am-Bored... come back to video)
Vfff.... Vfff... Vfff...:D
EDIT: yep, I liked the Wave saw too.
-
Thanks for the testing Lynn. Sensible and realistic as always.
Here is a saw test from The Swiss Army Knife Owner's Manual (with Mr. Young's permission):"In a test of 30 seconds cutting with sharp wood saws on 1 ½ inch square redwood the new-design Wenger was the winner, barely ahead of Victorinox; then the Chinese and the Spanish Aitor about tied, just ahead of the old-design Wenger; the German Korium proved to be rather ineffective. On 3-inch plastic pipe the Victorinox saw was the winner. The only saw to cut worse than the old Wenger design was the Spanish Aitor. The German Korium placed in the middle of the group. The modern-design Wenger was almost as good as the Victorinox, just beating out the Chinese."

-
@Lynn LeFey said:
No, no video version, sorry. Watching me sawing an old branch sounds pretty horrifying to me as a video."And here I am..."
Vfff, vfff, vfff, vfff..... vfff, vfff, vfff, vfff..
(Fast forward 4 minutes)
"And that was the Berkley. Pretty slow. Let's try the next."
Vfff... Vfff... Vfff...
(Fast forward ten minutes)
Vfff... Vfff.... Vffff...
(Pause video, go get beer... drink beer, read a few e-mails, surf I-Am-Bored... come back to video)
Vfff.... Vfff... Vfff...:D
EDIT: yep, I liked the Wave saw too.
Um, I'm pretty sure I would watch the whole thing.

-
@Lynn LeFey said:
No, no video version, sorry. Watching me sawing an old branch sounds pretty horrifying to me as a video."And here I am..."
Vfff, vfff, vfff, vfff..... vfff, vfff, vfff, vfff..
(Fast forward 4 minutes)
"And that was the Berkley. Pretty slow. Let's try the next."
Vfff... Vfff... Vfff...
(Fast forward ten minutes)
Vfff... Vfff.... Vffff...
(Pause video, go get beer... drink beer, read a few e-mails, surf I-Am-Bored... come back to video)
Vfff.... Vfff... Vfff...:D
EDIT: yep, I liked the Wave saw too.
Ummmm yes I'd watch it!
-
Another round of tests.
Same test 'subject' as all the previous. I found a deadfall branch off of our oak tree, about 1/2" (13mm) to 3/4" (19mm) through the solid wood section, not including the bark.
The contestants today were the Leatherman Sidekick, Wenger Handyman, Victorinox Spirit X, Victorinox Farmer (coming back as a standard for comparison), and the Wenger Ranger 58. In the first pic, I arranged them by saw length, shortest on the left. If I recall correctly, the Wenger Handyman and Vic Spirit's saw are so close to the same length that I can't tell the difference.
Sadly, I don't currently have a Vic 111mm to compare against the Wenger Ranger, but I have a Rucksack on the way, and hope to do a head-to-head when it arrives.

So, I think this is the first time I've done this kind of test, and not had a junky saw in the bunch.
The second pic is approximately in order of how they performed. No different from the initial organization. I think this leads me more strongly to believe that among good saws, length is the real determining factor. With a couple caveats.
The Sidekick has a pretty good saw, and the tool was comfortable in-hand, with a nice large handle to grip on. I wasn't super thrilled with the pull-only cut of the blade, though.
The Handyman cut the same as the previously tested Eco S17, except it has an annoying chain flopping around, and really enraging me. Also, I didn't remember it from the previous test, but the handle seemed REALLY hard to hang onto. The grip and chain are the only two things that set it below the performance of the Spirit's saw, IMO.
The Spirit X's saw, despite being a good deal wider than the Wenger 85mm saw, cut just as well. With more tool to grip onto, and maybe I was just less afraid of using it aggressively, particularly on the push stroke. I wasn't afraid of busting up plastic scales.
Farmer. Wow. Great grip, solid. No fear of banging it up, I just let 'er rip, and it cuts so amazingly well.
The Ranger was a beast. It cut SO fast. I am rather excited to give it a run against a 111mm Vic. I suspect the Ranger will clearly take the match. As I recall, the Trekker was a tad better than the Farmer. The Ranger was clearly better. I had some concerns about the OHO 'loop' on the Ranger's blade possibly getting in the way, but it didn't seem to cause a problem. The grip on the tool while cutting was so solid.
The only issue here is... how much weight do you want to cart around for a good saw. I think for the weight, maybe the Farmer is winning? Sure, the Ranger is better, but it's a LOT heavier, and more bulky, where the farmer slips right in a pocket. So... Hmmm... Still testing.
I also noticed today that the test, on a stick, pinned to my railing with one hand, and cutting with the other, might not be the best test for the bigger saws, where it might be possible to get a lot more force applied. I might see if I can find a little tree around to cut on to really push them.

-
Hi Lynn
Glad to see the Wenger Ranger finally made it into the test :)
I think the combination of the longer blade with the very comfortable handle makes it a clear winner for sawing.
Although I take your point about the size weight etcIf you know you have some serious cutting to do (eg backpacking trip when you will cut lots of wood for a fire) then the Ranger is what you should have in your pack/on the belt.
When I got my first Ranger I thought the handles were too big and a bit ridiculous.
Now I have had it a while, and used it for jobs like this I can see why they designed the handles the way they did.
As you say - it fits so comfortably in the hand.
It will beat all the others on this criteria...
Then add in the longer length = quicker cutting time = WinnerThanks for taking the time to do the test and making the post.
-
Thanks. It's been a long time coming to get to the Ranger. This thread is almost 3 years old.

-
A few years ago I modded a saw blade to fit in the jaws of my Crunch securely: the Dremelled slot in the end of the blade is ground till the wire cutters close perfectly into it, preventing rotation of the blade.
I also made a sheath for the blade, even chose the blade length to fit the Crunch's sheath perfectly, if you have it with you when you need it it might be useful...........though a longer blade would probably be better at cutting.
Obviously there's quite a variety of blades out there. I chose one called "Remgrit" which is supposed to be able to cut through pretty much anything.
The negative factor with using a saw blade in the Crunch's plier head is that the "handle" part of the saw(the Crunch, opened), isn't very ergonomic. Either wear work gloves, or restrict sawing to short bursts.
http://blogericious.blogspot.com/2013/06/leatherman-crunch-saw-mod.html -
Excellent test, Lynn!
I'm interested to see how the Ranger does head to head against the 111mm Vic.
Last week I was tidying the front garden a little and I was sawing up some branches, so I took the opportunity to compare the saws on the several different tools that I seem to have amassed. I too found that the Farmer seems handle really nicely, in particular I found it was binding up very little compared to the others. The wood I was cutting was pretty green, for what it's worth.
-
Just a
for actually doing the experiment and sharing the result with us. Thanks! -
Like for the scissors tests, i can only say: thank you!

-
So, I got a 111mm Victorinox with saw (Rucksack) the other day, and decided to go out in the back yard to do a final head to head against the Wenger Ranger 58.
I'd also gotten a Rebar in, and decided to give it a go against the (virtually identical in size) Sidekick.
So, here are today's participants...

I was using a thicker branch than I'd used before. I wanted one to give a better test to the longer saw blades. Unlike previous posts, I was wearing gloves during the test, because it was frickin' cold. This may have some effect on my perception of the ergonomics of each tool, but I can't say how much. I was also being more aggressive with my cuts. It was cold, and I was 'highly motivated' to get back inside, so I was bearing down much harder than previously, and the gloves allowed it with a lot less wear on my hands.
And the findings:
The Rebar and Sidekick were identical in cutting ability. And I was shocked how well both of them cut. I ripped through the oak branch pretty easily with each. The difference in blade position (one being inside open, one outside open) didn't make a difference. The handle on each tool also gave a good grip. the pull-cut teeth appear to like the more aggressive cutting technique.
Next up was the Rucksack. It was even MORE comfortable in-hand, with longer saw blade, but the lighter weight made it easier to handle. It was awesome.
And finally, the Ranger 58. It... uh... Hmmm. I really expected it to do better than the Rucksack. I'm not sure if the saw blade cut noticeably better. What I AM certain of is that it was a much heavier, more cumbersome tool, and for some reason, the size of the grip made my hand cramp.
Okay, maybe I'd just done all that OTHER cutting, and it was messing with me. So, back to the Rucksack, and... no. No problem with the Rucksack. Huh.
I think the extra width of the Ranger was causing me problems. The much higher weight of the tool was certainly an issue. In any case, if the blade was cutting better, the benefit was offset by the worse ergo.
I have to give this round to the Rucksack.
It might be different for people with larger hands, that find the size of the Ranger a more perfect fit. It might also be that a vic 111mm with a lot more layers would be less comfortable in-hand, or that a Ranger without the safety blade layer would have been more comfortable. In any case, for me, the added length of the Ranger blade didn't make up for the discomfort of the tool in hand compared to the Vic.

And, finally, here's a look at the 'test subject', the branch that was used. It's oak with a solid center about 1 1/4" (32mm) thick, and a total thickness, including bark of about 1 3/4" (44mm)

-
I also feel a need to say that a Reber, Sidekick, Rucksack, and Ranger 58 all in the same pocket are not a comfortable EDC carry. :D
-

funny that!
-
Thanks for the saw test Lynn! Can't wait to try out my Workchamp and Outrider this summer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login