The Dremel (or clone ) Owners Club
-
@Xelkos said:
Wanted to get the Workstation for it, but never really found a need to justify getting one. if only could use this as a lathe of some sort for small hobbies like chopsticks.
The flexible shaft heard has a problem that if it gets stuck on high speed, or hits a jam the shaft will break. Not sure if that is true or not, haven't heard of a safety break to prevent such damage should it ever occur.the only problem ive ever had with that shaft is if it bends too far it cuts it off, but just unbend it and it zips back to speed, JR
Oh and as far as a lathe you mean something like this, cause this i think would be perfect, especially for like pens?
http://s3images.coroflot.com/user_files/individual_files/original_13921_fKOx0Qesi2AQqUYGi5XOGknBY.jpg -
My setup, the Dremel 3000 with the flex shaft is relatively new, used for probably closed to 4 months, no issues so far. The drawback with the cordless 8200 is short battery life and slightly on the heavy side. It's also longer to accommodate the battery. This is the old model with the 10.8v battery, the new models come with 12v.


-
I have three Dremels but I can't remember which ones they are. I know that two of them are small battery powered and bright blue. The other is corded and dual speed. When I get back from vacay here in Indy I'll check them out and post nomenclature stuff and images. (note to self: check Dremels when you get back from Indy)
-
@stealth007s said:
I have three Dremels but I can't remember which ones they are. I know that two of them are small battery powered and bright blue. The other is corded and dual speed. When I get back from vacay here in Indy I'll check them out and post nomenclature stuff and images. (note to self: check Dremels when you get back from Indy)
hey stealth007, dont forget to check out your dremels when you get back! LOL -
Thanks JR!¡!
Remind me in three days or so

-
has it been 3 days yet?

-
No, but keep bumping this thread until then :D
-
it's been over an hour... I better bump it.
-
-
Thanks Peter

-
No toolkit is complete without a Dremel rotary tool. It was the first power tool I bought and I've had one ever since. There really are a wealth of things you can do with one.
-
@Xelkos said:
Wanted to get the Workstation for it, but never really found a need to justify getting one. if only could use this as a lathe of some sort for small hobbies like chopsticks.
The flexible shaft heard has a problem that if it gets stuck on high speed, or hits a jam the shaft will break. Not sure if that is true or not, haven't heard of a safety break to prevent such damage should it ever occur.the only problem ive ever had with that shaft is if it bends too far it cuts it off, but just unbend it and it zips back to speed, JR
Oh and as far as a lathe you mean something like this, cause this i think would be perfect, especially for like pens?
Where did you find that, and how much did it set you back for?
Seen another on eBay, used, only does 6 inches. Would want 14 inches for a project I wanted. Supposedly there is a company wanting more hardwood chopsticks which was looking into how much is would cost for materials vs. profit. Think will either resort to a Jimmy-rigged setup, or just do them by hand and forget the possible side-profit idea.
Makes one wish for a foot powered model like old grinder wheels & Singer sewing machines had. Less energy cost, just as much production. Then if applying oil by friction/cloth method would work that would save even more time. If I only had a sugar momma.

-
It didn't set me back any thing. Cause I don't think it's ever been made, I think it's just a pic done on a comp. but I sure would like to get my hands on it though! Whats the mfg of the lathe that only does 6"? JR
-
surely it'd be better to have a purpose build mini lathe vs using a dremel like that? A lathe is something you want all elements to be firmly attached... having an easily detachable item like that might be a bit disastrous/dangerous...
-
@MadPlumbarian said:
It didn't set me back any thing. Cause I don't think it's ever been made, I think it's just a pic done on a comp. but I sure would like to get my hands on it though! Whats the mfg of the lathe that only does 6"? JRSays Dremel, about $150ish. One of the rare ones. EBay: Listing 1, Listing 2

There's an infamous harbor Freight one at the $500 I heard was a royal POS. It would heat up the plastic parts without a load and was falsely labeled at 3/4 Hp and found out to be 0.34 HP - a clever typo.
-
that looks a lot better!
-
I've always been a multi person, lol. I had a shed as a workshop which didn't give me much room to work, I made a special table, in which could do multi things using normal items, a circular saw attached underneath to make a table saw, same with a jig, to make a scroll, also a router, and on top I had a jig to use a normal drill and turned into a drill press, along with the grinder, mounted the drill and used grinder/sander wheel. But there are a few things that shouldn't be jiged like a lathe, although a router would make a good one! Sorry no pics when we moved I had to put it in storage and don't think ill ever get to it.. JR
-
I'm getting huge Dremel jealousy now!
Um, well, i guess you guys are going to get "jealous/envy" cause i got everything taken care of and it should be here possibly by Friday! :D heres a pic for you guys to
over! my bad! JR

I hate you!!!

-
didn't think this thread would go this far. guess we like our dremels ( and clones)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
