Show off your Sak mod's!
-
Not really a SAK mod, but what the hell.
As soon as I touched my first Alox SAK I knew there was no going back. However, I wanted to keep the nice scale tools: pen, tweezers and needle. I tried different approaches, but nothing could recreate the ease of use like on cellidor SAKs. So why not just slim down a cellidor SAK as much as possible and only retain the tool slots? Said and done. And it disappears nicely in my wallet. :D



-
Nice idea

-
I'm still looking for that perfect EDC
This is my latest try at finding it.
I managed to put the Philips and flat driver on the same layer. It is not 100% tidy but works great for a user knife, both half stop works well and no play with a spacer.
-
That's great Zag

Did you see the mods where both openers were opposite the Philips instead of a spacer?
-
That's great Zag

Did you see the mods where both openers were opposite the Philips instead of a spacer?
Will that work with 91mm?
I have idea - we need a modder to answer that! :D
It will yes, but not as easy as on the 93 since the springs arent symmetrical. You would have to modify the profile of the cap lifter to match that of the can opener.
-
That's great Zag

Did you see the mods where both openers were opposite the Philips instead of a spacer?
Will that work with 91mm?
I have idea - we need a modder to answer that! :D
It will yes, but not as easy as on the 93 since the springs arent symmetrical. You would have to modify the profile of the cap lifter to match that of the can opener.
There's my weekend project.
-
@Sr.Multiherramienta said:
Wonderful!

Cool 8)
Did you salvage the awl, shield and scales from a vintage SAK, or handmade new?
-
Last night, I decided that I liked that blue alox USB Rambler that I made for my coworker so much that I wanted a similar one for myself. I had a pair of leftover blue alox scales from the Midnite Manager build and some leftover parts from a couple of recent teardowns. With all of that, I built up a blue alox Drifter (one of those +B exclusive models)...and of course, you know me...I had to have the USB module in there. Very nice extension to the Rambler, could very well be the 58mm EDC for me. Basically, it's an alox Rambler with USB, emergency blade, pointy nail file and flat head with ruler markings. Here's a couple of pics:


In regards to my coworker's mod, I presented it to him today and told him of what went into the creation of the mod...specifically, his dad's Rally knife. Definitely some sentimental moments there.
-
Tease

-
Wonderful!


Cool 8)
Did you salvage the awl, shield and scales from a vintage SAK, or handmade new?
The parts came from an old busted up knife.
-
Nothing more to it worth mentioning?
-
Ok I present my first ever sak build. It is a brass scaled Rogue, or as I have been referring to it ( inferior Syph knock off). Everything has snap on closing apart from the scissors, but for my use it is fine. Now just trying to find more 58mm for donors.

-
Oh wow, you didn't mess about with the first one!
Lovely

-
@nuphoria said:
Oh wow, you didn't mess about with the first one!Lovely

Well my peening is best described as industrial. However using brass scales allowed you to sand away the incriminating evidence. Therefore making up brass scales was the best option for me. Thanks to syph for the heads up on the thickness of the brass. Also the how to sticky (sorry cannot remember who did it) really help.
-
Oh wow, you didn't mess about with the first one!
Lovely

Well my peening is best described as industrial. However using brass scales allowed you to sand away the incriminating evidence. Therefore making up brass scales was the best option for me. Thanks to syph for the heads up on the thickness of the brass. Also the how to sticky (sorry cannot remember who did it) really help.
Good job! I found peening the little guys pretty tough too, and sanding away the bruises really helps! :D My problem was that I was peening too much so that the tools ended up too tight so I had to redo a few rivets before I was happy. Next time I'm going to put in some stainless steel shim stock, peen, then pull out the shim so that there is some free play.
-
Oh wow, you didn't mess about with the first one!
Lovely

Well my peening is best described as industrial. However using brass scales allowed you to sand away the incriminating evidence. Therefore making up brass scales was the best option for me. Thanks to syph for the heads up on the thickness of the brass. Also the how to sticky (sorry cannot remember who did it) really help.
Good job! I found peening the little guys pretty tough too, and sanding away the bruises really helps! :D My problem was that I was peening too much so that the tools ended up too tight so I had to redo a few rivets before I was happy. Next time I'm going to put in some stainless steel shim stock, peen, then pull out the shim so that there is some free play.
Yep that's the problem with the scissors on mine and I think shim may be the solution. Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



