The Raspberry Pi
-
@Grant Lamontagne said:
Is there a decent kit you could recommend for a quad that would lift a GoPro? I'm not terribly skilled when it comes to electronics, so anything more than plugging part A into part B is a bit beyond me.Def
Fortunately, plugging things into other things is pretty much all you need to do. No soldering or anything. The hard part is trimming it yourself. That can take a while, but you'll be done in an hour if you're new to it. The KK board that is in my quad at the moment has its own lcd screen which you can use to set it up right on the quad itself, whereas some of the more advanced controllers require you to plug it into a computer to do that.
All the parts that make up the quad in the picture came from Hobbyking, a Hong Kong based site with local warehouses in a number of countries that lots of people have good luck with, but there are some not-so-good stories of people who ended up with missing parts, or broken boxes, so bear that in mind. I've not had any problems with them, but the risk is always there. They've a good enough returns policy, though. There are plenty of other sources for the components, though. RCGroups and Ebay are good places to start.
Anyway, warnings aside - these are the components. Prices are in US dollars:
50w 5A Balance Charger - $17.99
SK450 Frame - $17.99
KK2.0 Board - this is about the most basic flight controller you can get. Doesn't allow for addons like gps, altitude hold, camera gimbal control, but it'll get you in the air to see if quads are for you - $29.99
Turnigy 2200 mAh 3s Battery - $8.99
Turnigy 9X transmitter & receiver combo - $54
NTM Motors - $59.96 (for four)
Turnigy Plush 30A Speed Controllers - $48.76 (for four) note that these are a bit overspecced for the motors, but they were cheaper than the 25A ones, so for future proofing sake and being a cheapskate I went with these.
8045 Right hand props - $2.85 for a pack of four (the spares will always come in handy!)
8045 Left hand props - $2.85Total, to get you into the air - $243.38 US. A bit more than in my original post, but still less than an AR Drone. I guess prices have gone up a bit since I bought.
The quad, as is, will lift about 650 grams. For comparison purposes, a Nikon D5100 DSLR body weighs about 560 grams, and a GoPro 3 (without case) only 74 grams
Also not included is a raised landing gear so the camera clears, or a dedicated mount for the gopro. I tend to tie mine to the frame and move the battery back to counteract the change in centre of gravity, while the landing gear is something I lashed together from bits of carbon fibre and plastic rod. Will do something more professional at some point. You can pick up suitable gear from ebay starting about $12 or so.
-
I'm not worried about frame/body parts, landing gear or stuff like that. I've built enough things around my house, model kits when I was a kid and so on that I can manage that sort of thing.
What type of flight time do you get out of a setup like that? The Parrot only gets between 12 and 18 minutes.
Def
-
seriously cool toys... makes me wish I had a workshop even more...
-
@Grant Lamontagne said:
What type of flight time do you get out of a setup like that? The Parrot only gets between 12 and 18 minutes.Def
About twelve minutes if you're lucky and don't run full throttle all the time. , With batteries being cheap I carry several, charged and ready to go. The charger can also charge from car batteries.
Remember that the batteries are lithium polymer. They don't go wrong a lot, but it does happen, and when they do they can be quite dangerous - see also the problems that Boeing Dreamliners are having. When in the car I store mine in an airtight old ammo box with non flammable padding to keep them from rattling around.
If one does catch fire it is worth remembering what metals at the fun end of the periodic table do when exposed to water. A powder extinguisher is probably better.
-
For people still wanting a Pi and having trouble, it's worth noting that CPC have a load of the cheaper Model As in stock, when I got my Model B it arrived quickly and they're doing free shipping at the moment.
RS are usually great with customer service but they usually deal with businesses rather than consumers, CPC are a bit more consumer friendly IMO. We get a lot of stuff from RS at work and when you have a problem it's almost always a case of "no problem, we'll have a replacement with you tomorrow" - you really can't say fairer than that.
-
ironically I discovered RS components via a banner on this site... I bookmarked the Spanish site in case I needed parts for any future projects, and had planned to do an order once I had a nice healthy list of items to get at once, shame it seems to split to a different website for the RPi...
As for other project parts, I only really need a replacement rocker switch for one of our lamps as the existing one is a bit flakey.
-
yet another reason to get a RPi:

http://hackaday.com/2013/03/23/hacked-interactive-r2d2-controlled-by-raspberry-pi/R2D2 Robot Powered by Raspberry Pi

-
That is pretty cool! I'd love to have something like that, although I'd also build in an empty port to carry a multitool. Just imagine...
Me: "R2- Spirit!"
R2: Whistles happily, compartment pops open, shiny SwissTool Spirit is extended out on mechanical arm
Me: "Thanks R2!"
:D
Def
-
http://www.amazon.com/Star-Interactive-Astromech-Droid-Robot/dp/B001E95SQ2 seems to be his starting point... and it seems to have lots of features to start... a bit small however!
-
I almost bought one like that at Costco a couple of years ago. :D
Def
-
That R2-D2 builder is a very good boyfriend :D
-
I did not know they were made in Wales?
so go on you brits, support the local economy!
-
Bought a raspberry pie a couple of weeks ago, finally got round to loading the raspbian wheeze operating system onto an sd card, only to discover that my keyboard and mouse are not USB!
two more things to get, I'm sure I'll get to turn it on one day. -
There's been some discussion on the Raspberry Pi in couple of other threads, if you haven't seen it yet.
</topic/43580
Do you have an end plan for it, or just playing around?
-
Cheers for the link, just going to play and see what I can do. I hope to use it to learn more about general computing? I also like the ideology, and they now make them in an old Sony factory a few miles from my house. Sadly mine says made in china, but the newer models say made in WALES!
-
Philby, instead of buying a new keyboard and mouse, just get a PS/2 to USB adapter dongle for a couple dollars, and use the already-present input devices. :)
-
Cheers! got one on the way

-
I prefer a rhubarb pie... oh wait.. :D
-
I've got one I primarly use as a audio streaming device in the living room. It runs, headless connected to my home network and a set of speakers. I control it via ssh using MOC audio player to play live on line audio streaming or downloaded podcasts.
https://www.youtube.com/watch?v=XDPOpNVS_tg
I've used RaspBMC in the past and it plays very well.
-
I hook mine up occasionally for various programming projects, though I use my Arduino more and more often for the sake of convenience.
I never bought a monitor specifically for the Pi, I used either a television or computer monitor I already owned. I bought a presentation keyboard/trackpad combo off Amazon for it so I could have a USB port free (Original B model Pi), or I SSH into it from one of my other devices. The Pi is easiest to interact with via command line anyway; the desktop environment is so slow.
Anyone bought a Pi 2 yet?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login