My small adventure into 58mm SAK modding!
-
Tapping those small threads in Ti must have been an adventure.
I did some 1-72 threads in stainless a few years ago and I'm sure I was on the verge of breaking the tap constantly.
-
@PTRSAK said:
Tapping those small threads in Ti must have been an adventure.I did some 1-72 threads in stainless a few years ago and I'm sure I was on the verge of breaking the tap constantly.
YES! But I at least has the foresight enough to drill and tap before I cut them out of the stock sheet.
If I messed up a hole after spending all the effort to cut the scale out first I would have been double mad. I only have 1 tap as well, but I used an excessive amount of oil and I had no problems. Also for tapping, I use a cordless drill with the clutch set to very low value, so it wont force the tap if it's binding and cause it to break. Still it's nerve wracking. Tapping with a hand T handle is disaster for me, Ive never been able to use those well.
-
That's SUPER cool.
Sooooo. how much for just a set of scales?

NO!!! MUST NOT SPEND MORE MONEY ON 58s!!!!
-
@oreogaborio said:
That's SUPER cool.Sooooo. how much for just a set of scales?

NO!!! MUST NOT SPEND MORE MONEY ON 58s!!!!
Ya making the scales is the bulk of the work, so probably more than you want to spend. I kept track of supplies while making this and I blew $30 on sand paper and sanding belts alone. Ti is very aggressive on abrasives and takes a lot of work to get just right. For a comparison, I probably used about $4 of sandpaper to shape and finish the brass.
Im assembling the Ti minichamp right now, pics to follow in a few minutes.
-
That's SUPER cool.
Sooooo. how much for just a set of scales?

NO!!! MUST NOT SPEND MORE MONEY ON 58s!!!!
Ya making the scales is the bulk of the work, so probably more than you want to spend. I kept track of supplies while making this and I blew $30 on sand paper and sanding belts alone. Ti is very aggressive on abrasives and takes a lot of work to get just right. For a comparison, I probably used about $4 of sandpaper to shape and finish the brass.
Im assembling the Ti minichamp right now, pics to follow in a few minutes.
the anticipation is killing me....but where are the Ti scales for your S2 ;)
-
That's SUPER cool.
Sooooo. how much for just a set of scales?

NO!!! MUST NOT SPEND MORE MONEY ON 58s!!!!
Ya making the scales is the bulk of the work, so probably more than you want to spend. I kept track of supplies while making this and I blew $30 on sand paper and sanding belts alone. Ti is very aggressive on abrasives and takes a lot of work to get just right. For a comparison, I probably used about $4 of sandpaper to shape and finish the brass.
Im assembling the Ti minichamp right now, pics to follow in a few minutes.
the anticipation is killing me....but where are the Ti scales for your S2 ;)
Omg my wrist is killing from doing these. Maybe I need to invest in a proper metal cutting band saw, that would make like easier I think. :D
I even took video of the mini champ, its uploading now. More in a few minutes.
-
Here are some build progress pics first. The carbide deposits look rought, but they are actually super smooth the the touch.







Final pics next...
-
Nice!
-
Here we go all done!








And some cell phone quality video! I was mostly trying to show off how nice the snap is. Trying it without the carbidizing is really not so good.
-
That's fantastic. Love the threaded scales.
-
That's just flat out purty. I have to ask though, how did you manage to get the screw ends flush with the scales?
-
@jrp316 said:
That's just flat out purty. I have to ask though, how did you manage to get the screw ends flush with the scales?I held the SAK fully assembled against a belt sander with 600 grit belt. :D Then took the back scale back off and finished the edges, polished and reassembled.
Holding a tiny object like that, that I spent so many hours on, against a belt sander, did feel a littler nerve wracking!
-
Bloody lovely Robert

-
Very nice mate.
-
WOW!
-
This was a for hire job, but I'm building more once I get some more mini champs in. My keychain needs one!
-
Stunning stuff mate.

-
Great job !
-
That ti minichamp is so nice! Great work Robert
-
What screws are appropriate for the 58mm saks? Are they commonly available? I would love to have a alox rambler, but +B price is a bit high. If it is an easy swap, I might give it a go myself.
Cheers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login