Geek SAK
-
Does this SAK have a name, or will it be Geek SAK?
-
Stamp the Victorinox shield on it, and this is how the new Cybertools should be manufactured.

-
Lol, a good way to dispose of ewaste!
-
@TurkTeen said:
Stamp the Victorinox shield on it, and this is how the new Cybertools should be manufactured.
Tritium vials would really bring this idea to a new light. Then too... hmm... a working PCB version that used a battery for surface mounted LEDs in flashed in a patterns when the Vic shield button was pressed, though that would <u>not</u> be recycling as much as a light vial could be.
You could even experiment with various glow in the dark colors, paint the various surface resistors.
Was thinking of this resin with grains of sand, small rocks, chopped beach sea shells, or even leaves enclosed within. With that be molded, one could even fabricate molds for normal and Plus scales, and snap on replacements maybe? Not sure how tough scales would be from that resin in comparison to cellidor.
Edit: Missed the "<u>not</u>" due to a distraction. Watching a Jackie Chan movie. :D
-
Wasn't there already a "Show off your SAK mods"-post, showing such knifes? Long, long ago.

-
@HankSolon said:
Wasn't there already a "Show off your SAK mods"-post, showing such knifes? Long, long ago.
This isn't a mod, it is just another form of scales. A separate post helps clarify the concept rather than a basket of everything thrown together. We've had a few discussions on various types of scales in the not so recent past, but hard to include them all without it getting messy. Not unless the moderators gave us a Scales forum.

-
That's a lot of fun - nice work

-
Very geekycool
is it made for Sheldon from big bang :D -
@Xelkos said:
This isn't a mod, it is just another form of scales.Which is a mod.

:D
Nah, a mod is a modification of the tool. Scales is like a paint job, or upholstery.
Something that changes the overall tools & drivers. Like adding an awl to Wave, taking stuff out & replacing it with stuff that should of been there. That's a mod, where ya take it apart and try to put it back together without having extra parts. 
-
@Xelkos said:
Nah, a mod is a modification of the tool. Scales is like a paint job, or upholstery.
Your definition is kind a special....
;) :DHowever, what I learned is, "there's no correct or wrong definition but suitable or not suitable". You want your scales forum, so you decide that a quick tools echchange and repin of less than half hour is more a mod, than a > 8 hours ebony plus scales mod with shield inlay. ::)
Or speaking in results: You say that a mod is an exchange of tools, so that you get a knife which either hasn't been produced in that way or changes the set of tools of your originally knife. But replacing a scale, like getting absolutely custom wood scales, with extra tools like needle and pen is NOT a mod. Yes. I totally agree, that's not a mod. That's just a paint job, or upholstery. Because the result is in both cases a knife which hasn't produced before, but it cannot be a mod, because it's no mod.

:D
-
Really great. The scales would suit better a Cybertool of course but you could always make more since you have the skills.
-
Nice work Peter 8) 8)
I do have a big soft spot for 'Cyber Knives' 8) 8)
-
What Syph & Metro do to their tools are mods, imo at least. If one charges upwards of $300 for a swapping of tools I doubt that would be considered simple half and hour task. They have the task-specific tools to do them conversions, so yeah I would say for someone that only possesses limited knowledge and tools could <u>not</u> replace tools with such ease, and for them to be fully functional too.
This work you cannot just buy from a retailer and slap into your SAK without some knowledge & tools, least I would think. Not sure I would even feel comfortable attempting any knife mod without working with spare junkers before attempting something beneficial or suitable for bragging rights.
In comparison to the handmade custom scales that I derived from blocks of wood into Plus scales; working with old plastic scales, drawings, pictures, and a lot of help from the forum to make something that I otherwise had no idea what it looked like - still don't see it as a mod. That was more of customizing or accessorizing, and even put a Vic emblem in them. Hour wise, yeah, over a week and lots of work. Even altered them again, ground a thumb groove making it easier to open the corkscrew.
Could have bought the scales far cheaper than what it cost to make them, but I wanted a certain wood that no one else would make from. Scales can be plain, carved, or contain scale tools that are available perty much anywhere if not looking for a specific type of material. Those can be obtained without much effort, if not looking for a specific material.
Now if the scales popped out and became a camera tripod, turning the SAK into an assault crossbow, would fling string beans across the room to wake up a snoring pooch, would concentrate the suns rays into a portable solar furnace, or would form some otherwise specific duty then I could see that as a mod.
If you dress your lady friend or wife up in lingerie, a pretty dress, latex or leather, get her hair dyed red, that is accessorizing. Get her upgraded with a new set of hooters, a firm butt, and could make her purr - THAT is definitely a mod. :D

-
So how do we go seeing that this has "through the scales" exposed rivets and a hidden 4th pin. Also the scales are bonded to the side liners and the encapsulating resin flows round the sides and covers the edges of the liners... are we modding yet?
these are not a pair of clip on, clip off scales. To get them of you need a drill.
I have done knives with snap on scales in wood, bone and plastic. But most of my custom scales jobs are now done on knives that are broken down and rebuilt with new pins peened through the scales as exposed rivets. Often I use old knives with poor snap due to worn pivots. The new pins fixes that.
I guess you could say is more correctly customizing than modding. But it is the same as the difference between putting stick on pinstripes on a car and a full respray in candy red over gold base with 14 coats of clear. Almost any Joe can make a reasonable job of the former but you need a little more skill for the latter.
I don't mean to sound bitchy but I don't think the line is as clear as "mods involve changing tools"
-
Another grey area one...

technically it's just an Explorer, but the scales and side liners have been replaced with hand made ribbed aluminium side plates like an alox SAK.
mod or not mod?
-
@PTRSAK said:
I don't mean to sound bitchy but I don't think the line is as clear as "mods involve changing tools"That's it! English is not my first language, so it's difficult to express myself. But the statement above is what I wanted to say. :)
It's absolutely off topic now. But if there was a scale forum, we definitely would have difficulties to distinguish between "modding" and "customizing" and "scale change", since those words are sets which are overlapping. (I'm a computer scientist, thus half mathematician)
-
Well technically a mod is modifying something, or some part of something, usually in a way the original manufacture doesn't do (or doesn't want you to do). If you voided the warranty its for sure a mod! :D
-
Clip on scales I would think would not be customizing - as with everything I posted here was my in opinion. That is what is great here, many opinions, feedback, varied opinions - so as long one doesn't get their feathers ruffled. :D Where you had altered the knife structurally to attach them, then I would be consider it a mod. In contrast, the Australian Silky Oak scales I made I do not consider a mod as they can be removed without affecting the performance of the knife parts.
Removable scales that do not involve structurally modifying the knife, i.e. pin replacement, I would not consider a mod. Not unless the scales were structurally altered to perform something different than what common scales would. As if one put a miniature GPS unit into a scale, added a light or laser, then that is a scale mod for sure.
Guess I will coincide that the word mod is in the eye of the beholder & creator as to what they consider a mod.
Past that will try and not offer any further comments on other people's work.

Good night :)
@Syph007 said:
Well technically a mod is modifying something, or some part of something,** usually in a way the original manufacture doesn't do (or doesn't want you to do). If you voided the warranty its for sure a mod**! :D+1

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login