Scissors in a Skeletool
-
How are the Wenger scissors? Am I right in thinking they have micro-serrations and a better scissor profile for cutting than vic scissors? Can't speak about the quality since I've never handled a pair.
-
Neh, I just took apart a pair of modded Vic scissors and stuck it in a skeletool for demonstration. I'd like to see how a pair of Surge scissors would fit. I sold all the Surges I had so I can't check. :-\
-
Thanks so much for those pics Nikola - really useful

So the Vic ones aren't great which is a shame, because the scissors rock!No shortage of interesting ideas this far, but no solutions :(
Anyone got Gerber of SOG scissors around for reference?
-
Add on an awl, and I would have pretty much everything I would want on a tool.
-
@enki_ck said:
Here it is with a pair of 91mm Victorinox scissors.
Notice tha gap between the scissors rest and the liner lock back. Also the portion where the scissors schould rest in the open position is way off. Not the best option.
It looks really close though if you picture moving the pivot hole over as far as possible. The lock could be made to engage, and the rest would almost hit the right spot.
If I didnt have so many other projects on the go, Id give it a shot.
-
@Syph007 said:
Notice tha gap between the scissors rest and the liner lock back.It looks really close though if you picture moving the pivot hole over as far as possible. The lock could be made to engage, and the rest would almost hit the right spot.
If I didnt have so many other projects on the go, Id give it a shot.
Hmm. I have an extra pair of Vic scissors and a 3/16 carbide bit. Maybe on the weekend.
I have been meaning to take a look at the skele and see how I can make it mine.
-
go Metro

-
Notice tha gap between the scissors rest and the liner lock back.
It looks really close though if you picture moving the pivot hole over as far as possible. The lock could be made to engage, and the rest would almost hit the right spot.
If I didnt have so many other projects on the go, Id give it a shot.
Hmm. I have an extra pair of Vic scissors and a 3/16 carbide bit. Maybe on the weekend.
I have been meaning to take a look at the skele and see how I can make it mine.
Now we might be getting somewhere!
I'd love to commission anything that works from you Eric

-
Notice tha gap between the scissors rest and the liner lock back.
It looks really close though if you picture moving the pivot hole over as far as possible. The lock could be made to engage, and the rest would almost hit the right spot.
If I didnt have so many other projects on the go, Id give it a shot.
Hmm. I have an extra pair of Vic scissors and a 3/16 carbide bit. Maybe on the weekend.
I have been meaning to take a look at the skele and see how I can make it mine.
I doubt there would be enough meat on the scissors to do that, but I'll take them apart again tomorrow and measure.
-
Add on an awl, and I would have pretty much everything I would want on a tool.
You could make an awl for the bit driver fairly easily.

Yes indeed, and originally Bob did this for the Charge bit driver. It works well enough, but the whole point of the skeletool is its minimalist nature. Having an extra bit, with nowhere to store it, wouldn't be great.
I'm wondering if there would be space to introduce an awl somehow on the knife (to be replaced by scissors), pivot.
A while back a guy with username Evil was doing skeletool mods, among others, was a pretty dab hand at it as well.
-
Add on an awl, and I would have pretty much everything I would want on a tool.
You could make an awl for the bit driver fairly easily.

Yes indeed, and originally Bob did this for the Charge bit driver. It works well enough, but the whole point of the skeletool is its minimalist nature. Having an extra bit, with nowhere to store it, wouldn't be great.
I'm wondering if there would be space to introduce an awl somehow on the knife (to be replaced by scissors), pivot.
A while back a guy with username Evil was doing skeletool mods, among others, was a pretty dab hand at it as well.
I was thinking instead of having a separate phillips and flat bit, have one with both like on the wave then put the awl bit in the storage spot on the tool. That would be self contained.
-
That could work, and the other end of the awl bit could have a driver on it as required.
-
If i find the time, i can tear into my MP 600 and do a pic of teh scissors, but i can´t compare it to the Skele as i ain´t got one.
-
@lowtech said:
If i find the time, i can tear into my MP 600 and do a pic of teh scissors, but i can´t compare it to the Skele as i ain´t got one.I don't think any MP600's have scissors, the Diesel does and the freehand.
I think the Flik Scissors may work too, but the backspring will have to be peened into place like my Black Tide outside scissor mod.
I think a 2nd layer scissor would be awesome like Evil510s, the only thing stopping you is a spacer and a rivet.

-
@Metropolicity said:
I don't think any MP600's have scissors, the Diesel does and the freehand.The Pro Scout does.

-
I don't think any MP600's have scissors, the Diesel does and the freehand.
The Pro Scout does.

OOOO. Obviously I am missing this model!
Are they same same scissors on the MP400?
-
Yep they are. Nice tool overall, one of my favorites. Saw coupler, scissors, file...... Very useful setup.
-
??? talking about the Pro Scout... Can't find it on the gerber-site anymore... ??? Did they discontinue it?
-
It's still there.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login