Displaced Bail
-
Its hard to figure out how that got past QC..? Maybe its supposed to be that way?
-
Someone had to do that intentionally, I just cant figure out why.

-
I can tell you why. It could be for two reasons:
-
The SI bail is very floppy and loose, it can be a bit distracting. The way it is in the picture, it might be less noisy. I removed the bail on one of my SIs and I have to say it is, for me, generally better than with the bail. So hollow rivet > bail > keyring.
-
Maybe it is to restrict the range of motion so that the blade doesn't bite so much on the bail? The way it is arranged it looks like the bail is more likely to bite the tip area rather than the blade area?
Cheers
-
-
You know the hollow rivet had a purpose, it was used to aid in aiming a rifle mounted grenade launcher. So maybe this was done to have the bail and still keep the function of a hollow rivet.

-
The bail version is the civilian version. If the owner had a rifle mounted grenade launcher, he must have been a real BA.
:P
-
-
The bail version is the civilian version. If the owner had a rifle mounted grenade launcher, he must have been a real BA.
:P
No it isn't. It even has a wk stamp.
I see no WK mark on the SI posted by PTRSAK at the beginning of this topic. Only the square place where the mark would go. I assume Wenger did not do different sets of front scales for the Army version and the civilian SI and that at the time all scales had that square.
I also saw some old Wenger SAKs that did have the WK stamp while being obviously never military issued (some Tahara variations coming to mind). Based on that it look to me there that at some point the WK stamps were applied at the factory by default on all SI-type scales.
Just couple of observations based on individual knives. This may very well not apply to all.

-
And to me how the bails end up moved it sounds like an accident first (bail getting out of the hole) and then the owner not paying attention and leaving the bail moved, the bail digging its way into the soft aluminium. To me it looks that it's relatively easy for one with his bare hands to get a bail pop up and move from the original holes, not that easy to remove the bail completely off the SAK. So there the bail remains and digs new holes. Just a theory.
:D
-
I have seen that odd angle on the inside of the caplifter on one of my old Pioneers. I thought it was a mod, but I suppose not. Was that common and what was it for?
-
My bail sits in pretty deep holes. Mine looks to done on purpose.
-
Papercut, that's the old-style wire stripper.

-
The bail version is the civilian version. If the owner had a rifle mounted grenade launcher, he must have been a real BA.
:P
No it isn't. It even has a wk stamp.
I see no WK mark on the SI posted by PTRSAK at the beginning of this topic. Only the square place where the mark would go. I assume Wenger did not do different sets of front scales for the Army version and the civilian SI and that at the time all scales had that square.
I also saw some old Wenger SAKs that did have the WK stamp while being obviously never military issued (some Tahara variations coming to mind). Based on that it look to me there that at some point the WK stamps were applied at the factory by default on all SI-type scales.
Just couple of observations based on individual knives. This may very well not apply to all.

I think it's just worn, interestingly this one says it was issued in '88 and the WK stamp was used till '87 when they stopped using it entirely. This is how the last version of the WK stamp looked like.

The army issued SI's officially never had a bail, so maybe some of the soldier added the bails to their knives, but had to keep the hollow rivet for aiming and so had to make some new holes for the rivet.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login