Rebar file
-
Have Leatherman changed how they finish the file at the tip on the Rebar or did I just get a short file ?

-
And there was me thinking the Rebar was a popular tool lol
-
That's odd. Here's mine.

-
My Rebar file is also that way but more of an angle than yours. When closing the Rebar the end of the file is close to the handle.


-
I just scavenged the jaws and Phillips out of mine and chucked the carcass in a drawer

I don't think I even looked at the file lol -
And there was me thinking the Rebar was a popular tool lol
And then 3 posts in 2 minutes.

Just like buses
stand there for ages and then 3 come along all at once :D -
It does look like the end of your file may be different than ours. More squared. The longest part of the file is 7mm from handle to tip.
Short part (bottom) is 6.5mm. -
The thing is its finished very neatly and square , you can see the faint machine marks in it and its coated in BO
-
I just scavenged the jaws and Phillips out of mine and chucked the carcass in a drawer

I don't think I even looked at the file lolIs that a fairly simple Mod??
I have a B/O Wave MkII and a B/O Rebar. I could actually be tempted.
How easy/hard was it??Super easy. Google metros black tide.
-
I posted a pic on LMs Facebook page and they said its looks ok to them
I don't think it's worth sending it back for , there's still a chance this could be new stock. -
@Dunc said:
Have Leatherman changed how they finish the file at the tip on the Rebar or did I just get a short file ?
Think I know the answer to your question. Yours is the black oxide version, correct? If you work the file up & down in the channel you would probably notice that it just misses the pliers. Reason for this is to keep the file from scraping up against the pliers head - thus reducing the possibility of it scratching up the finish on the pliers.
With the shiny stainless steel version the file is longer but passes closely between the handle & the pliers. Though most probably would never make contact with either side, there is no chance in marring up an already shiny surface, as opposed to a blackened surface.
-
@Xelkos said:
Have Leatherman changed how they finish the file at the tip on the Rebar or did I just get a short file ?

Think I know the answer to your question. Yours is the black oxide version, correct? If you work the file up & down in the channel you would probably notice that it just misses the pliers. Reason for this is to keep the file from scraping up against the pliers head - thus reducing the possibility of it scratching up the finish on the pliers.
With the shiny stainless steel version the file is longer but passes closely between the handle & the pliers. Though most probably would never make contact with either side, there is no chance in marring up an already shiny surface, as opposed to a blackened surface.
That's a very good point , so someone with a BO Rebar should be able to confirm they have one the same
-
@Xelkos said:
Have Leatherman changed how they finish the file at the tip on the Rebar or did I just get a short file ?
Think I know the answer to your question. Yours is the black oxide version, correct? If you work the file up & down in the channel you would probably notice that it just misses the pliers. Reason for this is to keep the file from scraping up against the pliers head - thus reducing the possibility of it scratching up the finish on the pliers.
With the shiny stainless steel version the file is longer but passes closely between the handle & the pliers. Though most probably would never make contact with either side, there is no chance in marring up an already shiny surface, as opposed to a blackened surface.
That's a very good point , so someone with a BO Rebar should be able to confirm they have one the same
Took a couple of photos to show what am getting at. Some people would fold the pliers all the way out, yet others would just slide the pliers up just enough (like me) to get the file. Then close the tool back up, or extend it out.
Showing a possible scraping issue

Distance of file between the handle & pliers

Hope this helps in your inquiry. Since Leatherman is closed for the weekend I doubt they will answer. Depending upon how many facebook posts are applied between your post and Monday yours might get buried a bit.
-
Your country doesn't by chance have some obscure law against long files does it?

Possible you ended up with a fluke, revision, or just flat out got the short end of the
. Have you contacted the reseller and seen about getting a replacement? Not sure what the shipping is like over there across the big pond. -
Mine's the same as the other SS ones.
Sent from my XT901 using Tapatalk 2

-
I think you got an factory goof. Unless its a revision that is just surfacing.
The BO rebar in this youtube video has the file the normal way.
-
What is the file length? Can you tell if the tip is missing? Is it an older model, maybe it is an original design that was changed.
-
It measures 64mm from handle to tip , I'm going to send it back.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login