Bike porn thread
-
Blooper - Beautiful old bikes
--
sent via carrier pigeon from my secret hideout
'Buzz -
Now here is a great idea for a bike.

-
:D
My eBay watch list is getting depressingly full of old 3spds and tourers!
Sent from my Nexus 7 using Tapatalk 2
-
@chip said:
Just changed my tyres as the maxxis ardents that came on the bike tended to skate around a bit in the mud.Have put a highroller on the back and minion dhf on the front and it has made a big diference.
Low speed and thick mud they will clog,
But if you can keep the speed up they clear very well.Please excuse the soppy mudguards but they keep me remarkably clean so they will be staying until the weather changes.
ive always found mud gaurds more trouble then they're worth and havent fitted any to my current mtb. Maybe i never had a good set ???
-
The were quite cheap from halfords and worked well enough, kept me very clean. They are off now, maybe a bit prematurely.
Hopefully the weather is now on the up.

-
Way back in the early 90's, when my '69 Olds Delta 88 was having brake issues, went and bought a new form of transportation. Got a Specialized Rockhopper, in an 18" frame.
Had a Peugeot with a 21" frame at one time, but the head tube cracked. Got a tip from the big fellas back then to stick with a tighter frame, and to extend the stem & seat tube.
Sacramento, CAThe flexible mud flaps only work at very slow speeds and when going straight. Yet to find a decent mud/splatter front fender that works at 30+ MPH.

Folsom Dam, CALater on had gotten some rather expensive Night Sun 10w/30w lights which actually performed like the manufacturer claimed. Not once ever burned out either lights for having it over 15+ years. Did drop in once and lost the spot and got a large ring, but the light mechanisms started failing, then the battery, so after about 20+ years it got scrapped. Not bad for a $200 unit.
If I ever got back into serious riding again would invest in another Night Sun lighting system.Frame Art

The Rest Stop, Sacramento, CA.

Strange how stickers from way back then outlast the ones made anymore....
This bicycle sat in storage for another decade or more and I decided to get the cables replaced and get a tune up. Just got her back from Jdz Underground Bike & Board Shop in Wieser, Idaho for a serious tune-up & cable replacement/adjustment.

Had to buy new tubes recently and hoping to get some riding in soon. Also bought a bigger saddle with no horn to help break in my big butt and get back into cycling again before putting the horn saddle on again.Bought some new accessories: top bar bag, new grips, and a new speedometer. Still need to get a headlamp, and tail-light. Still have the old Blackburn luggage rack on the back, and two Rhode Gear thermal luggage packs, and a set of paniers I used to carry my uniform and supplies to and from work at Kaiser Hospital.

Don't have the transparent reflectors that had high intensity flashing LEDs in them anymore. Don't see anyone making them anymore, and I had such rave reviews from those at the hospital that passed me by - they could see them lights a mile away at night. - Can see the LED reflectors up in a top photo.Driver's Seat

Oh yeah, forgot, also have a Girvin FlexStem shock absorber stem system. Was the thing back then for bikes that did not have the newer spring absorbers. In the 90's those spring systems were closer to the $5,000 professional bicycles. Strange how things change in a few decades. :D

Not many safe places to ride here in Idaho like there was in California. Still hoping to get out some this year and get some weight off too. :)
-
Lovely shots there mate :)
As for mudguards, I'm never without them on any bicycle I own, but then I hardly ever off road :)
Sent from my Nexus 7 using Tapatalk 2
-
@Mike, Lord of the Spammers! said:
Lovely shots there mate :)As for mudguards, I'm never without them on any bicycle I own, but then I hardly ever off road :)
Sent from my Nexus 7 using Tapatalk 2
great pics mate and i had a girvin flex stem on my old kona explosive
as for mudguards im with mike,i dont drive so am a cyclist and mudguards are a must unless you live somewhere hot and dry :D i have full lengh guards on my road bike as i always did when i trained years ago on my winter bike as doesnt just keep you dryer but you dont throw water into your mates face :D on my MTB's ive always used crudcatchers, i prefer the older race guards over the newer model as lighter and not as bulky looking,i have got a spare green rear crudcatcher raceguard if anyone is interested 
-
Some bikes are fun because of the ride they provide and some are fun for because of what they carry.

-
@hiljentaa said:
So here's my road bike, which sees most of my mileage.
I also have a track bike, touring bike, and mountain bike, but no recent pictures of them.
What year model is your road bike? That is a great looking bike. I have an 88 Bianchi with an updated drivetrain and parts.
-
^
im looking for a new bike and fancy a steel frame and fork job so far this has caught my eye
its a charge hi juicer 2013.
anyone know of anything similar looking?
-
Cooper and Genesis do a decent range of bikes :)
Sent from my Nexus 7 using Tapatalk 2
-
i do love the look of the coopers but i like having a kidney more :D
-
You only need one mate :D
Sent from my Nexus 7 using Tapatalk 2
-
[quote author=MeadMaker link=topic=5435.msg715146#msg715146 date=1365464110]
Some bikes are fun because of the ride they provide and some are fun for because of what they carry.
[/quotethat is so cool
-
This is my baby, though nothing crazy, it's a really nice bike to ride, and yes, that is an old man seat on it!

Sent from my HTC One using Tapatalk 2

-
I've found one! Going to have a look at this tomorrow morning
All being good I'll have a new bike :-)
-
Just got the innertubes installed, some joker at Bell was bored or something. One valve core was in nearly 40 foot pounds. Broke both nylon vale core tools trying to loosen it up.
Tore up the shed, two tool boxes, and my tool shelf trying to find a metal core tool. Ended up invading my jewelery chest I had since was a teenager, sure enough one was there. Even then I had to use my Leatherman Charge to grab the side wall of the core tool to remove the valve! I so have to get a valve core removal bit for my Charge, and one to carry on a keychain.Put a hornless saddle on, and it sure does feel different. Since I gotten bigger the horns of other saddles made me black and blue between the legs. Got a Schwinn Cruiser saddle last winter. Doesn't quite feel right, but I didn't move the TCO seat tube, and stuck the saddle in the middle of the rocker.
Was going to go out this evening to the wildlife preserve I found earlier in the week and ride around, but after all my adventures today it's feeling like nap time - then it will be dark. :ahhh One issue of being over 50, naps seem to common place.
-
I've found one! Going to have a look at this tomorrow morning
All being good I'll have a new bike :-)
I like that one Ryan. Old school with the shifters on the down tube

might change them to sti shifters as ive never ridden one with down tube ones before but i will see how i get on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login