And so it begins.... (My adventures into Alox!)
-
Excellent stuff Robert - you're amongst a bloody great line up of prized there

-
If I won, there would only be a few things higher than your sak on the list- The rifle, the damascus Bowie (I am a sucker for it), and the hand forged knife (also a sucker). So you would be #4 :) . In fact, I might just pony up some scratch for the chance.
Cheers
-
I had more Ti work to do today so I needed to solve my Ti dust makes scary fires problem.
This 4x36 belt grinder is what I do most of my roughing work with and it had a plastic housing underneath that just really got in the way. I ripped that off and bolted on a meat loaf pan from the dollar store and filled it with water. Worked great as the hot Ti dust ended up in the water pan and no fires today! :D

This project is a 4 layer full 84mm conversion. Cadet with saw and scissors. After I rough cut the scales and liners, I make a Ti sandwich and sand it all together.


Doing it this way is an nice way to make sure all the liners and scales mate up perfectly.



And the result of lots of grinding. Still needs surface finishing and scales need profiling though. But at least I dont have to worry about Ti dust building up and combusting now. :D

-
Great work!
The thing that is really great about Bob is that he makes custom knives. If you look around on the net, there are many knife makers, and knives, listed as 'custom.' Just ask one of these makers to change a small detail on one of their designs. They won't do it, and usually won't even respond to the request. They are not custom knife makers. They make high quality knives by hand, but they are not custom.
Want a knife out of certain materials, with certain colors, with certain... Bob just says... OK, you got it.
I am going to need a second mortgage when he starts designing/creating his own tools.
I feel like a new parent, looking at ultra-sound pictures.

-
seems like you once mentioned the possibility of ti back springs.
any progress finding the proper alloy there?id like to do a stripped down hiker, all in ti and carbon fiber... ultralite hiker.
-p
-
@byksm said:
seems like you once mentioned the possibility of ti back springs.
any progress finding the proper alloy there?id like to do a stripped down hiker, all in ti and carbon fiber... ultralite hiker.
-p
Im going to try making a blade backspring first and see how that goes. I have the right thickness here to try. I'll use the 4-6 alloy first and see how that goes. Now that I can carbidize the springs I dont see a problem with making them. Im curious if I make them the exact same profile if they will have more or less snap than stock ones.

The nice thing about Ti is you can heat and bend fairly easily too.
I can see the appeal of an ultralight for backpacking for sure.

-
Seems like you have new fans, welcome Dean and Byksm!
-
It feels like I have a million things going on, but Im trying to make progress on all fronts at least. I've been wanting to do a BO run for ages to see how that goes and I finally finished prepping all the parts for a test run.
Here's the before shot, hopefully the after one turns out. :D

-
^ oh, this gonna be good.

-
@Syph007 said:
Here's a very different one from my typical jobs. It was a request by a user with the use of only one hand. He wanted a one hand opener but just the electrician blade and nothing else.This uses my custom spring for a type of solo electrician. The blade was straightened out as normally they are bent to fit with the cap lifter. I also rounded out the hump on the pivot on one side to require less force to start the opening process since the blade is shorter and there is less leverage. I also peened this one. Crazy I know... :D The customer wanted it so I obliged.



My cat and I took some video to show the action. (He was just taunting the neighbours dogs which is why they were barking)
Cheers
Do you ever follow up this design with further models? It seems very cool and useful. A pioneer with oho main blade would be most interesting!
-
@papercut said:
Do you ever follow up this design with further models? It seems very cool and useful. A pioneer with oho main blade would be most interesting!No one else has ever asked for anything similar yet. This method would really only work on single layer mods though as this thumb stud was large.
I haven't done too many single layer mods really, but here is a new one by request. 93mm bantam with pocket clip.


-
Could the stud only be on one side? If not, oho 93mm bantam would be cool too!
-
Actually a 93mm Bantam, or Chicken as I call it, is a quite handy piece of gear.
It just about disappears in your pocket like a solo but has the advantage of the combo tool.
I just love that 93mm blade, tough as nails. -
Something like this could make the farmer into the coulda woulda shoulda 2009 soldier:
http://www.knifekits.com/vcom/product_info.php?cPath=60_94_531&products_id=4350
-
Do you ever follow up this design with further models? It seems very cool and useful. A pioneer with oho main blade would be most interesting!
No one else has ever asked for anything similar yet. This method would really only work on single layer mods though as this thumb stud was large.
I haven't done too many single layer mods really, but here is a new one by request. 93mm bantam with pocket clip.


If you'd want a multiple layer one, I guess you'll have to do something weird with the order of layers, too, as the blade is actually positioned on the left side of the knife, right?
-
Ive had a couple more orange cerakote mod requests. Here's an interesting 2 layer one. :D



-
Nice job as normal
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


