58mm split ring size?
-
Hi all,
I'm not entirely sure how it happened, but the ring on my much used and abused Classic snagged a thread on the living room carpet, and became bent out of shape when I picked it back up. It's still riding shotgun in my pocket, but feels kind of weird without the requisite split ring.
So, rather than spend 5 or 6 bucks on half a dozen split rings from Vic, I figure I would spend 5 or 6 bucks on 50 or 100 split rings of the appropriate size from Amazon. The inside diameter appears to be about 10mm, although the measurement may be skewed due the ring being bent. If someone would so indulge me, may I have the measurements of the 58mm split rings, and if anyone has a favorite brand, I'm willing to take a look into them.
While I'm at it, what is the size of the straight pin that fits into the 91mm scales. I have a few empty slots I need to fill, as well.
Thanks!
Keith
-
I just tried a few different dress making pins from the supply we have here - one of them fitted fine!
As for the split rings, I did what you are suggesting and bought a bunch of non-Vic ones :)
Can't remember the exact size, but I would guess around 6mm internal diameter. -
Outside diameter 9 to 9.5 mm (some variability in my samples). 3/8 inch is very close. Inside diameter just under 8mm.
Thickness about 1.3 mm: It must go thru a ring-hole of width about 2mm. -
For the pin size Dritz 20 comes to mind. It is the standard pin to hold fabric together for sewing.
-
I discovered a good supply in a local security shop for 13p each but are a tad wider but I prefer them ad easy to slide on and off my carabiner

-
I bought a bag of 100 Stainless Steel split rings from a fishing tackle seller on eBay for $8.00. Better than $1.00 each as Vic spares from the knife shop.
They are 12mm for larger SAKs but they had 9mm ones as well.
As far as the straight pin goes, have a look at "glass head" pins. They are usually made from a sewing needle with a glass or plastic bead on the eye end. They are stronger and sharper than a dressmaker's pin and you can usually remove the bead and then you have a needle for emergency sewing tasks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login