What Did You Use Your Multitool For Today?
-
I have used my multitool every day on and off work.
I'll try to get a post here letting you know what I'm up to
today
swisstool RS at work.
I removed some old broken commercial clothes dryers in a closed laundry that I'm turning into a storage building. Cut power wires, removed wire brackets, capped some gas lines. It took a pipe wrench to remove the gas lines.
tonight I used leatherman charge tti
cut open a plastic package, used the Phillips on my screen door
-
I just used my PSTII pliers to remove an envelope that was jammed inside our folding/inserting machine here at work. It was in a hard to reach area (most areas in this machine are hard to reach with just my hands), so I pulled out the PSTII and used the tip to grab what little bit I could and slowly work the envelope out of the jammed up area. This is an example of me needing the more needlenose like Leatherman pliers as opposed to the Spirit's pliers for this type of finer work. However, like a fool, I am carrying my Spirit as well, and should have tried it out to see how it would have been able to handle this issue. I think another contributing factor was how slim the PSTII is, which allowed me to maneuver it just right to get to the envelope. Good job to my PSTII

-
Cutting caught materials off the laser cutter with my Splash.

-
No tool kit, but my trusty Charge helped me remove clip on dog lead and replace with a more secure Karabiner.

-
Yesterday
I removed and reinstalled some water meters. Opening up a few houses. Fixed a set of stairs.
today I tighten up a few screws on my carpet shampooer and cut a few things open with a skeletool.
-
SOG Powerlock awl.... making a bigger hole around IR receiver in my very cheap Media player!
-
I used my Wingman to work on my BuckTool display.

I used the file to smooth the hole for the power cord. The pliers to hold a couple of bolts.
-
Just had to use my Pioneer to break into my own home ::) We decided to go for a family walk and locked the door, but forgot the key. I was able to pry the back door open with the bottle opener/flathead and let the girls in ;)
-
Just had to use my Pioneer to break into my own home ::) We decided to go for a family walk and locked the door, but forgot the key. I was able to pry the back door open with the bottle opener/flathead and let the girls in ;)
Chalk one up for the Pioneer Mon

Yes indeed. That bottle opener/flathead is a rather solid prybar really. I did a lot of prying with it on the front door first, then the back door. Not a scratch on it, but I may have a tiny chip in the black color. That's the price I pay I guess ;)
-
The mvp's of my day. I also had to use the Kf4's Phillips driver to tighten the latch plates for each door after the prying I did;)
Sent from my XT901 using Tapatalk 2


-
Use my Juice S2 to Push/Pop the collar off my Opinel. I'm thinking about a Mustard Patina Job.

-
MT: SOG PowerAssist
TASK: fixed the broken plug off an extension cable
RATING: 9 out of 10*i guess my leatherman squirt PS4 would've been sufficient but the SOG was the one within reach
also installed some fixtures with:
MT: Leatherman Skeletool CX
Task: Installing hooks
Rating: 7/10I think I really need to get an Octane

-
Wife used my Micra to cut tags off of some new baby clothes

-
Sideclip's pliers allowed me to adjust the mirrors on my work vehicle this morning.
-
Doing some laser cutting with some help from my new, old wave.
Still not done modding it but its close. I added an awl from a PST last night.

-
Today I used my S2 to put a new wick into my Zippo pipe lighter.

-
I tightened up some cabinets with my ST200. I swear the owner of my condo is a DIY moron. There are paint lines on every wall from poor masking, all the towel racks were loose when we moved in, and there is no cover on the fan light in my bedroom. With the hardware that was with it there is no way it would fit on the fixture. Constant projects for me!
-
Used my Wingman to tighten some screws on the seat of a substitute bus I was driving today.
-
I used my Spirit to remove a broken coldroom controller from a coldroom (it had decided to to freeze all the cheese inside and wasn't sure whether it was -10 or +20C, it was actually -3) and replace it with something that used to be controlling a boiler on the farm. A mixture of removing the old box, mounting a new one and doing a load of electrical work.
I've set up alarms in all the stores so they send out an alarm text if they stop working and go over temperature, but never thought to put an equivalent under temperature alarm in!
It wasn't how I planned to spend a decent chunk of my day but it needed doing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login