Slip Joint Safety
-
Not sure if this is the best sub-forum for this...
As I am wont to do, I tend to over analyze things. The last couple of days I've been thinking about slip joints, and their safety. I've been carrying and using a SAK for many years, and thankfully have yet to get bitten. But the thought of that strong backspring snapping that blade closed on my fingers makes my skin crawl.
This is primarily why I am trying out a Rebar as a possible EDC replacement for my Pioneer. It would be very hard to close the Rebar blades on my fingers.
I know this is overly paranoid, and any knife is only as safe as the operator, but I was wondering what you folks thought? Has anyone been bitten by a slip joint that they weren't abusing?
I really like my SAKs and I'm making myself overly paranoid, I think

-
In short,no!
I've had SAKs since I was twelve,never had it happen.Drivers yes,but only when I've been using them in inappropriate manners.
Had a UKPK close up on me too,which made me rethink OHO slip pies,but in fairness,it was getting into the abuse range of use too
-
I've never caught myself with a closing blade but have had too many close calls when the blade has slipped and started to close. So I don't like slipjoints.
However,,,,, the SAK's offer the best selection of blades for my use and the steel is good enough to get a shaving edge so I love them.
I modified my Wenger Alox Soldier to have a blade that could be selectively secured in the open position. I don't think of it as a locker as such,, but as a knife that has a blade which will not shut unexpectedly. My definition might not be shared by the Police but my life-stye doesn't take me to situations that might bring me into contact with them so I've stopped worrying about legality
My knife also gained German Silver scales and brass liners,,,,,,

-
I was taught as a Cub Scout to lay the body in the palm of my hand and fold the blade right back into the body, hold it throughout. I still do it now, and have not been bitten yet. Cutting myself out of general clumsiness, well, that's another matter altogether :tool:

-
I haven't been bitten closing a blade, but that saw got me once and now it has developed a taste for blood... :ahhh
-
i managed a nice little gash a few years ago, still have the battle scar ::). i may have been partly at fault , i'm very heavy handed and slightly stooopid

i've managed to cut myself with most of my knives at some stage, so i can't say that slippies are the most dangerous. I'd think 'locks' do make things safer but there may be a case for a false sense of security as well. -
My only scar is on my right index finger and dates almost 19 years ago, when I was serving rural service and opened a corned beef can with my Swisschamp. But it wasn't the Vic that cut me, it was the barbarian can metal. Lots of blood and I traveled overnight to Athens with a tight bandage because my wife gave birth to my daughter soon after.
All my slipjoint cuts (around 10-12) healed easy without scars, because Vics cut very cleanly and the trauma lips touch each other very nicely. -
As long as you are not bearing straight down on the point I really don't see the problem with slip joints. Even if you do wish to push the tip of the knife into something all you need to do is keep in mind which way the knife might bend and use it at just a couple of degrees off true.
Great looking mod BTW Boyo.

-
Only ever been really cut up by a locking blade which I was trying to close in a stupid way ::)
<---- KLUTZ :D
-
I've never been bitten by slip joints, just locking blades. The combination of liner lock, stupidity, and being left handed is never good.
-
-
@Boyo17 said:
I've never caught myself with a closing blade but have had too many close calls when the blade has slipped and started to close. So I don't like slipjoints.However,,,,, the SAK's offer the best selection of blades for my use and the steel is good enough to get a shaving edge so I love them.
I modified my Wenger Alox Soldier to have a blade that could be selectively secured in the open position. I don't think of it as a locker as such,, but as a knife that has a blade which will not shut unexpectedly. My definition might not be shared by the Police but my life-stye doesn't take me to situations that might bring me into contact with them so I've stopped worrying about legality
My knife also gained German Silver scales and brass liners,,,,,,

That looks nice! How does it work? By putting pressure on the backspring?

-
Thanks, all! I think I am being overly paranoid, especially since I've never been bit ::)
Besides, I was taught early on how to use a knife safely.
If there is one thing good about my paranoia, it has lead me to discover friction folders
;) -
That looks nice! How does it work? By putting pressure on the backspring?

[/quote]Thanks,,,,, The catch is a cam that stops the springs from moving. See the two images on the left hand side of the pic above,,, Top image is with the catch extended and the gap to the springs can be seen,,,,,, bottom pic the catch is folded down against springs and the gap has gone. I had to file the end of the springs to allow a 4mm radius around the third screw
-
@gustophersmob said:
That looks nice! How does it work? By putting pressure on the backspring?
Thanks,,,,, The catch is a cam that stops the springs from moving. See the two images on the left hand side of the pic above,,, Top image is with the catch extended and the gap to the springs can be seen,,,,,, bottom pic the catch is folded down against springs and the gap has gone. I had to file the end of the springs to allow a 4mm radius around the third screw
[/quote]That's a very clever design. What size screws did you use for the pivots? Did you have to drill out the tools? More importantly, want to make me one?
;) -
3mm screws and a 2.5mm drill cut off for the centre pin so didn't have to drill out any of the blades or springs. 2.5mm is the correct size drill to use for a 3mm thread so that worked out well.
Sorry,,,,,, I just wouldn't have the same enthusiasm for somebody else's knife
-
@Boyo17 said:
3mm screws and a 2.5mm drill cut off for the centre pin so didn't have to drill out any of the blades or springs. 2.5mm is the correct size drill to use for a 3mm thread so that worked out well.Sorry,,,,,, I just wouldn't have the same enthusiasm for somebody else's knife
I'm confused, the threads are a larger diameter than the drill hole

I was kidding about you making one, but I may have a go at it myself. Really is a simple, but genius idea

-
There are no nuts on the other side of the knife,,,,, the threads are tapped directly into the scale,,,,,, so drill 2.5mm and tap 3mm
If you can't tap the threads yourself then 3mm dome nuts could be used on the back side,,,,

-
Ahh, I see. So the holes in the tools are 3mm?
I like this idea quite a bit and am looking at nickel silver and brass stock right now.
-
if you want to put an M3 bolt through, you drill 3mm. If you want to tap an M3 thread, you have to drill slightly smaller so it has something to bite on.
On topic, I had a scarily close encounter with my Kick whilst cutting cable ties off trussing standing at the top of a scaff tower. Depending on how you're using it, you can get in to a situation where the blade pings shut when the cable tie brakes, particularly if you're tired, in a hurry and not really thinking about it. When it happened I jumped, and that sent the whole tower wobbling around which really put the wind up me. I sold the Kick after that and haven't carried a non-locking bladed tool for heavy use/abuse since.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login