Any love for Wenger?
-
@basilio said:
Some interesting knives I bought from Japan.
Not 100% sure about the black Motorist, but for the others I suspect they were only sold in Japan.
Top view pictures on the wiki.<img src="http://www.sakwiki.com/show_image.php?id=2796" />
<img src="http://www.sakwiki.com/show_image.php?id=2798" />
<img src="http://www.sakwiki.com/show_image.php?id=2800" />
<img src="http://www.sakwiki.com/show_image.php?id=2801" />
Some great looking stuff there!

How did you get knives out of Japan? Every time I've tried I've been told they can't ship because of a) Japanese regulations, b) US regulations, and/or c) Victorinox regulations.
-
@ColoSwiss said:
Some great looking stuff there!
How did you get knives out of Japan? Every time I've tried I've been told they can't ship because of a) Japanese regulations, b) US regulations, and/or c) Victorinox regulations.
Thanks!
I honestly did not have any problems, and I'm pretty sure that japanese regulations do allow export of knives.
For shops not willing to ship internationally there is this service, which seems to be quite popular
http://www.tenso.com/en/
I registered there, but had no need to use it (so can't really give an opinion) -
Super knifes.
my congratulations -
Some great looking stuff there!

How did you get knives out of Japan? Every time I've tried I've been told they can't ship because of a) Japanese regulations, b) US regulations, and/or c) Victorinox regulations.
Thanks!
I honestly did not have any problems, and I'm pretty sure that japanese regulations do allow export of knives.
For shops not willing to ship internationally there is this service, which seems to be quite popular
http://www.tenso.com/en/
I registered there, but had no need to use it (so can't really give an opinion)Made another attempt. Set up an account with Amazon Japan. Ordered two Wengers and three Vics. Went to pay for them and all had a message saying they could not be shipped to my area. Probably the fourth time I've tried a Japanese dealer, and all with the same negative results.
-
Some great looking stuff there!

How did you get knives out of Japan? Every time I've tried I've been told they can't ship because of a) Japanese regulations, b) US regulations, and/or c) Victorinox regulations.
Thanks!
I honestly did not have any problems, and I'm pretty sure that japanese regulations do allow export of knives.
For shops not willing to ship internationally there is this service, which seems to be quite popular
http://http://www.tenso.com/en/
I registered there, but had no need to use it (so can't really give an opinion)Has anyone actually dealt with Tenso?
-
@basilio said:
Some interesting knives I bought from Japan.
Not 100% sure about the black Motorist, but for the others I suspect they were only sold in Japan.
Top view pictures on the wiki.**Those are fabulous! ** LOVE the black scales with the imprints. :drool: Congradulatons on some great knives.
-
Some great looking stuff there!

How did you get knives out of Japan? Every time I've tried I've been told they can't ship because of a) Japanese regulations, b) US regulations, and/or c) Victorinox regulations.
Thanks!
I honestly did not have any problems, and I'm pretty sure that japanese regulations do allow export of knives.
For shops not willing to ship internationally there is this service, which seems to be quite popular
http://http://www.tenso.com/en/
I registered there, but had no need to use it (so can't really give an opinion)Has anyone actually dealt with Tenso?
Went to register with Tenso, and their agreement said they could share my data with anyone for any reason. Pass on that. Guess I won't be getting any knives from Japan in the near future.
-
Any members in Japan?
-
With much surprise, I found the original image patterns used for the hardwoods, ap balze and snow camo models.
As you can see, the new snow pattern is exactly the same as the orange "ap blaze", with just different colors. :D :D


-
Still using my AP Blaze 10 for EDC. Not easy to see on picture, however it hold just fine. Just some smoother surface. See the different pattern or different part of it.
The bottom one is the EDC one :)Also another on my knives, by luck i found an older Mora Carbon blade, 70s or 80s they are 3,5mm to almost 3,8mm thick at the tip..

-
Good combination of knives, SAKs do work so well outdoors in combination with a good fixed-blade.
My latest treasure is an 82mm 2-layer Wenger. Whoever was in charge at the time they made this knife seems to know their stuff as it is top quality.

-
@ICanFixThat said:
Good combination of knives, SAKs do work so well outdoors in combination with a good fixed-blade.My latest treasure is an 82mm 2-layer Wenger. Whoever was in charge at the time they made this knife seems to know their stuff as it is top quality.
lovely find

Absolutely they knew/know their stuff :), -
Nice pictures and knives!
-
I found two interesting old brochures.
One is for the Lithos written in german.
The other is titled "Argyros" and is about the Sterling and Imperial models.
@ Francis: I would upload them directly to the wiki, but I can't see the option.
In fact, I am only allowed to upload pictures to the knives gallery, but not to the catalog section.
I also don't see any option to make small edits.
Anyway, here are the pictures



-
more Lithos




-
Argyros




-
@basilio said:
I found two interesting old brochures.
One is for the Lithos written in german.
The other is titled "Argyros" and is about the Sterling and Imperial models.
@ Francis: I would upload them directly to the wiki, but I can't see the option.
In fact, I am only allowed to upload pictures to the knives gallery, but not to the catalog section.
I also don't see any option to make small edits.
Anyway, here are the picturesvery nice Basilio

-
@ICanFixThat said:
Good combination of knives, SAKs do work so well outdoors in combination with a good fixed-blade.My latest treasure is an 82mm 2-layer Wenger. Whoever was in charge at the time they made this knife seems to know their stuff as it is top quality.
Yes i also feel a fixed blade and a SAK go hand in hand, actually the handle i made on the 70s or 80s Mora is inspired some from a SAK aswell. Different layers of wood is not new, however a SAK is a layer design. So it did fit my idea. Every part is glued to eachother and to the tang. I used a bolt in the back to tighten and to peen some aswell. And one can use the SAK in the making of a handle aswell if one want.
I also got some inspirations from the Argyros today, i will see if i can put on some metal on the next knife. It will be in a few months since fishing is for this summer. -
@basilio said:
I found two interesting old brochures.
One is for the Lithos written in german.
The other is titled "Argyros" and is about the Sterling and Imperial models.
@ Francis: I would upload them directly to the wiki, but I can't see the option.
In fact, I am only allowed to upload pictures to the knives gallery, but not to the catalog section.
I also don't see any option to make small edits.
Anyway, here are the picturesThat's a great find.

You should be able to upload them to the wenger catalog gallery just as you would to any othe open gallery. If not I'll put them somewhere, need to reorganize that gallery a bit; maybe consolidate the single pages into a sub-gallery. Were you trying to put them somewhere else?
What do you mean by small edits? to you mean to image names and descriptions? That might be restricted, but you should be able to edit the pages.
if you have higher resolution images it would be great if you emailed them to me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login