Slip Joint Safety
-
@gustophersmob said:
That looks nice! How does it work? By putting pressure on the backspring?
Thanks,,,,, The catch is a cam that stops the springs from moving. See the two images on the left hand side of the pic above,,, Top image is with the catch extended and the gap to the springs can be seen,,,,,, bottom pic the catch is folded down against springs and the gap has gone. I had to file the end of the springs to allow a 4mm radius around the third screw
[/quote]That's a very clever design. What size screws did you use for the pivots? Did you have to drill out the tools? More importantly, want to make me one?
;) -
3mm screws and a 2.5mm drill cut off for the centre pin so didn't have to drill out any of the blades or springs. 2.5mm is the correct size drill to use for a 3mm thread so that worked out well.
Sorry,,,,,, I just wouldn't have the same enthusiasm for somebody else's knife
-
@Boyo17 said:
3mm screws and a 2.5mm drill cut off for the centre pin so didn't have to drill out any of the blades or springs. 2.5mm is the correct size drill to use for a 3mm thread so that worked out well.Sorry,,,,,, I just wouldn't have the same enthusiasm for somebody else's knife
I'm confused, the threads are a larger diameter than the drill hole

I was kidding about you making one, but I may have a go at it myself. Really is a simple, but genius idea

-
There are no nuts on the other side of the knife,,,,, the threads are tapped directly into the scale,,,,,, so drill 2.5mm and tap 3mm
If you can't tap the threads yourself then 3mm dome nuts could be used on the back side,,,,

-
Ahh, I see. So the holes in the tools are 3mm?
I like this idea quite a bit and am looking at nickel silver and brass stock right now.
-
if you want to put an M3 bolt through, you drill 3mm. If you want to tap an M3 thread, you have to drill slightly smaller so it has something to bite on.
On topic, I had a scarily close encounter with my Kick whilst cutting cable ties off trussing standing at the top of a scaff tower. Depending on how you're using it, you can get in to a situation where the blade pings shut when the cable tie brakes, particularly if you're tired, in a hurry and not really thinking about it. When it happened I jumped, and that sent the whole tower wobbling around which really put the wind up me. I sold the Kick after that and haven't carried a non-locking bladed tool for heavy use/abuse since.
-
I may be the only idiot to have a Swiss Champ split my thumb about a half inch deep. I was making a hole in a plastic buckle to thread paracord through and the main blade folded in on me. Looking back, I should've used the awl and it wouldn't have happened. Roughly a dozen stitches and remarkably no scaring. Oh yeah, it hurt bad. I try not to use many slip joints now, only lockers for me. This may be why I don't have many SAKs (only 2).
-
Yes, you are being a little paranoid, but that is good, as it will make you cautious. I've been using slip joints all my life, and I'm a social security senior citizen now. I've worked in the blue collar trades where a sharp pocket knife is part of your tools. But I have never ever cut myself when using the slip joint for a cutting tool as it was designed.
But...
I have seen two very disastrous accidents with young guys using a locking blade knife, and having total fatih that it would not fold over on them, and they got careless. One case was a young guy using a Buck 110 folding hunter. He leaned on it, andit collapsed, and neatly amputated his right index finger, and almost took off his middle finger. He'd been told not to do that, but hs smart a-- answer was "It's Buck knife, it's meant to take it." In addition to loosing his finger, he was fired for violating shop safety rules, so it was a loose/loose day for him.
The second case was, I needed some minor surgery on my leftthumb for a tendon problem. My better half and I were at a hand surgery clinic waiting in the waiting room to be called back. Sitting in the room wuth us was a young man with his mother. He had his right hand bandaged up, and in conversation it came out that he was messing around with one of those tactical kind of knives the young kids like, and the blade lock failed, and almost cut off his finger, but severed some very impotant ligiments and tendons. The surgons were going to try to give him back some use of his damaged fingers.
I'll put it this way, with a slip joint, I know as sure as the sun rises in the east, it's going to close on me if I do something stupid. So it makes me be careful and conscious of what I'm ding. A lockbnlade is only as strong as the pounds of torgue it takes to over power the lock. It will fail, and when it does, it will fail suddenly and totally.
If I want a knife that I know will not fail on me, then it's time to use a fixed blade. A small pocket fixed blade is safe, all others are not. I view a locking blade knife as a accident waiting to happen from bad knife handing habits getting started because of a false sense of security.
-
As above, treat every slipjoint with respect, and treat every folder as a slipjoint, only then will you come to no harm.
-
cbl51 makes an excellent point.
I use every folding knife as I would a slip joint, whether there happens to be a lock on it or not. -
Ive never folded a slipjoint on myself ever. My dad taught me how to work one with I was 6 and Ive been using them ever since. I dont actually tend to like lockblade knives. I like poicket slipjoints and fixed blades. Ive never needed anthing in between. The worse injuries ive had are from the saws on SAKs. They tear flesh alot more than a plain blade, and is another reason I dont like serrated blades.
-
-
@Essexman said:
As above, treat every slipjoint with respect, and treat every folder as a slipjoint, only then will you come to no harm.Well said Mark

Slipjoints (or spring knives as they were originally called here) have been in use for centuries. The only thing that's changed is the levels of common sense of their operators. Used with respect, these tools will keep working and working safely. Locking knives are a misnomer in many ways as excellently pointed out by cbl51. Not only do they lull people into a false sense of security that their blade is now "fixed", but with many locks (liner and backlock especially) you have to put your fingers under the path of the folding blade to release them.

Aside from the odd multitool or two
that has a locking blade, generally speaking I'll be carrying a slipjoint blade or fixed blade. Even if I do have a locking bladed multi, I'll often have a secondary knife which doesn't have a stupid lock on it for doing things safely. I'll be honest, occasionally I do carry a locking blade as a dedicated knife, but at no point will I treat it any differently to a slippy. Locking blades have bit me many more times than slippies, and I wasn't even abusing them - they're EVIL!!! -
ONE wise old member already mentioned the 'false sense of security' you can get with lock-knives on this thread

-
Keep in mind, that simple folding knives with not even a back spring like a slip joint, have been in use for 2000 years. All the way back to the time of the Romans. Simple friction folders have been in use in Europe for common everyday cutting for hundreds of years. I've been using more and more friction folders in my day to day life, and not having even a back spring to hold the knife open is not a problem. The dynamic forces in the action of cutting hold even a strait friction folder open.
My Sardinian Pattada is a very good day to day pocket knife with zero springs. Just a firm friction fit
http://farm9.staticflickr.com/8400/8687660896_630e4799f6_c.jpg -
It's like "a rite of passage" to have a blade close on you.
-
I've never injured myself putting a slip joint knife away.
That being said I don't trust them as a potential emergency defensive weapon... heck I don't even really trust liner lock knives in emergency defensive situations, only tri-ad locks or axis locks (or their variations).
I do have one edc knife that I carry that is a liner lock but I've trained myself to hold it in such a way that my fingers don't get in front of the path of the blade in case the liner were to fail in an emergency defensive situation. It's less than ideal.
I should also add I don't trust slip joints or liner locks for heavy field craft such as batoning. I'll thump on a tri-ad or ram lock but I prefer a fixed blade.
-
@Philthy said:
I've never injured myself putting a slip joint knife away.That being said I don't trust them as a potential emergency defensive weapon... heck I don't even really trust liner lock knives in emergency defensive situations, only tri-ad locks or axis locks (or their variations).
I do have one edc knife that I carry that is a liner lock but I've trained myself to hold it in such a way that my fingers don't get in front of the path of the blade in case the liner were to fail in an emergency defensive situation. It's less than ideal.
I should also add I don't trust slip joints or liner locks for heavy field craft such as batoning. I'll thump on a tri-ad or ram lock but I prefer a fixed blade.
I am always at a loss to understand the role of a pocket knife as a defensive weapon. Any folding knife is about as poor a weapon as you can get. When that mugger pulls a knife and demands your wallet, are you under the misguided idea you will have time to grab for your folding knife, and then get it open before you get knifed??? And if you do by some stroke of luck get your knife open, are you ready to engage in a knife fight with some idiot on drugs? If you need a weapon, some sort of blunt force truma weapon is far superior to the folding knife that you may not have time to open. A club of some sort is easy to have around, a stout walking stick, pool stick, a nice master lock with a bandana through it, bicycle lock, and lots of other items. Stone breaks knife. Not to mention pepper spray. When I went through the police academy, we learned how a blunt force truma weapon is effective immediately when bones are broken, nerves smashed. There's a reason police are issued sticks, they work.
And as far as batoning with a folder, That's a good way to break what may be your only cutting tool. They make unfolding knives for combat use as well as survival, called fixed blades. They work really well for heavy duty use and you don't haver to worry about them folding up on you.
A pocketknife is for those zillion little jobs that come up. Way back when I was growing up, men carried a pocket knife. If they went hunting they carried a sheath knife. When I was in the army and we went to a little fracas in Vietnam, we got issued the Camillus MK2. A nice sturdy 7 inch fixed blade. But I used my SAK at least several times a day for all those little jobs that outnumber the big ones by a 50 to one ratio.
There's two kinds of knives in the world, those that fold and those that don't fold. If you don't want to worry about your knife folding, don't have one of those.
-
Some great posts here chaps :)
My thoughts are similar to most here in that any tool is safe when used within its limitations, if you don't go stabbing bricks you shouldn't have to worry about
a knife folding on you :DSent from my Nexus 7 using Tapatalk
-
I think to an extent you misunderstand. Certaintly the situation you described is one instance where one might need to defend themself.
Here's another scenario for you, a dog, let's call it a pitbull is attacking you or someone next to you. While dog attacks can be vicious they are not necessarily instantaneous and it has been my experience that one might have time to react. I for one would rather have a knife than a stick against a pitbull because in short order I can defend myself with a knife. It would be weird if I carried a big enough stick to deal with a dog such as pitbull all of the time...if you're wondering yes I have slashed a pitbull in the face as it was lunging at me. I was on the phone with 911 as a friend of mine and his mom were being attacked, the dog tried to attack me as I was getting the address off of their mailbox when I slashed it the dog turned tail momentarily long enough for me to go back inside. I was a young teenager at the time and the whole situation was less than ideal. It wasn't my knife it was the biggest kitchen knife I could find, which wasn't very big (like a 3-4" paring knife). It was the first time I was over his home and I didn't know his address.
Not all defensive situations are caused by 2 legged predators. There are plenty of videos online of police officers hitting dogs with batons and essentially nothing happening. Slash a dog in the face or stab it a few times, the situation may be different...as it was in my case.
As far as people, no one can be prepared for everything and certainly not a situation where someone already has a weapon out ready to use against you. Situational awareness is by far the most important thing when trying to preempt any kind of defensive situation...but better to have options than not.
@cbl51 said:
I am always at a loss to understand the role of a pocket knife as a defensive weapon. Any folding knife is about as poor a weapon as you can get. When that mugger pulls a knife and demands your wallet, are you under the misguided idea you will have time to grab for your folding knife, and then get it open before you get knifed??? And if you do by some stroke of luck get your knife open, are you ready to engage in a knife fight with some idiot on drugs? If you need a weapon, some sort of blunt force truma weapon is far superior to the folding knife that you may not have time to open. A club of some sort is easy to have around, a stout walking stick, pool stick, a nice master lock with a bandana through it, bicycle lock, and lots of other items. Stone breaks knife. Not to mention pepper spray. When I went through the police academy, we learned how a blunt force truma weapon is effective immediately when bones are broken, nerves smashed. There's a reason police are issued sticks, they work.And as far as batoning with a folder, That's a good way to break what may be your only cutting tool. They make unfolding knives for combat use as well as survival, called fixed blades. They work really well for heavy duty use and you don't haver to worry about them folding up on you.
A pocketknife is for those zillion little jobs that come up. Way back when I was growing up, men carried a pocket knife. If they went hunting they carried a sheath knife. When I was in the army and we went to a little fracas in Vietnam, we got issued the Camillus MK2. A nice sturdy 7 inch fixed blade. But I used my SAK at least several times a day for all those little jobs that outnumber the big ones by a 50 to one ratio.
There's two kinds of knives in the world, those that fold and those that don't fold. If you don't want to worry about your knife folding, don't have one of those.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login