Wenger universal wrench replacing Magnifier
-
What you see is part of my next project. I had a universal wrench left and have my girlfriend who doesn't need a magnifier on her swisschamp. Here we go. :)
Used an old Scissors spring without backtool. No big deal with grinding down the spring. But there's one issue with the phillips. It would close too much.
Here's my solution (used an previously damaged back spring to get a spacer):


-
Ha, using the fourth pivot is mighty brilliant.
-
This mod might become very popular. I have heard lots of people here wanting a universal wrench in a vic. Is that the new or old phillips?
-
That's the new style, note the notch in the back, the old style doesn't have this and it is longer. Very nice mod!!
-
Exactly, that's the new phillips.
Here it is, (not my, no) "her" new Swisschamp with Cybertool Bit-Driver and Magnifier replaced with a Wenger Universal wrench.
By the way, you could also have used the standard backspring from the phillips/mag, but here the snap of the wrench would have been poor.




-
Brilliant

-
I love it! I loathe the plastic mag 'glass' so it would be a great idea if Vic would do away with in and put in a wrench like you have. Looks like it 'just' fits but it looks great in your final build!

Ive got one wrench to use in a mod, I just cant decide exactly what I want to make with it yet.. but pairing it with a phillips driver as you have makes the most sense I think.
Great work!
-
Thx all. It fit's right now. But I had to do a little spacer trick on the wrench too. Grinded a little too much. ;)
But, grinding down a spring and getting spacers (I think I saw it with a phillips or scissor before - has anyone a link for it?) is nothing new. Just a variation of existing techniques. So credits go to this forum. :)
Ohh and Robert, wrenches are not that good after all. But here in Germany we have a good recycling system, so @all just send them to me. Good for environment and stuff.... :-D
-
That is a sweet mod! Good work.
sent from Ducttapetech's roaming device
-
@HankSolon said:
... wrenches are not that good after all. But here in Germany we have a good recycling system, so @all just send them to me. Good for environment and stuff.... :-DI'm quite happy to handle the environmentally safe disposal of Wenger Wrenches for the southern hemisphere.
Just my little way of making the world a better place.
-
I have always wanted to have the inline phillips, mag glass and the LED on a same SAK...this might be the solution!
Just pair the wrench with the phillips; and the LED with the mag...
Hmm...
-base set(spartan)
-scissors
-LED
-Mag glass(old one preferred)
-Wrench
-inline phillips
-Pliers(optional)
IS MY DREAM COMING TRUE?! :ahhh :ahhh :ahhh
-
... wrenches are not that good after all. But here in Germany we have a good recycling system, so @all just send them to me. Good for environment and stuff.... :-D
I'm quite happy to handle the environmentally safe disposal of Wenger Wrenches for the southern hemisphere.
Just my little way of making the world a better place.
Has anyone opened them up to 9.5mm (3/8") and sized them inwardly? Would gladly accept a few for this test for the North-Western US territory. :D
-
@TurkTeen said:
I have always wanted to have the inline phillips, mag glass and the LED on a same SAK...this might be the solution!Just pair the wrench with the phillips; and the LED with the mag...
This is a very possible setup. My extended swisschamp has a LED paired with a mag. An additional layer with phillips and wrench is reasonable. But don't underestimate the width of these 4 tools. Will result in a fat knife. ;)
-
I hope the wrench part wont be discontinued with Vic absorbing the wenger lineup. If it is, I think that might be the next custom part I make up with the next waterjet run.
-
@Syph007 said:
I hope the wrench part wont be discontinued with Vic absorbing the wenger lineup. If it is, I think that might be the next custom part I make up with the next waterjet run.Will hope so too. A custom wrench... hmm sounds good, maybe you can adjust it a bit, so that a standard phillips/mag spring will fit too.
But again... there should be a test run made in Germany, too. Too tired to find a good reason, but there is one. :-D
-
That would be an excellent layer to add to a Compact. Excellent work!
-
Really interesting. Is nearly the perfect Champ.
-
Question:
I have a wrench I pulled out of my Wenger because I thought it was useless. It's not wide enough to fit over any of the real heavy duty bolts or couplers I encounter, and the stuff small enough to fit can be better serviced by pliers. Why do people like this tool? What am I missing?
-
I have a wrench I pulled out of my Wenger because I thought it was useless. It's not wide enough to fit over any of the real heavy duty bolts or couplers I encounter, and the stuff small enough to fit can be better serviced by pliers. Why do people like this tool? What am I missing?
I am thinking the exact same question.
-
Question:
I have a wrench I pulled out of my Wenger because I thought it was useless. It's not wide enough to fit over any of the real heavy duty bolts or couplers I encounter, and the stuff small enough to fit can be better serviced by pliers. Why do people like this tool? What am I missing?
I am thinking the exact same question.
Works on lots of little bolts Ive come accorss. There are many different versions of it, some have more fine steps to work on more bolts. The biggest perk its its metal and can fit accross from a phillips and not have that awful plastic magnifier. ANYTHING is better than that piece of plastic in a nice SAK.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login