Leatherman SIDEKICK / WINGMAN Owners Club
-
Thanks Gareth. Do you happen to know if the uk knife law is cast iron. The way I see it your allowed a non locking blade of a maximum length of 3 inches with no exceptions? . The reason I ask is I used to carry the old Sideclip about with me on my belt, did that for years, so much so that its become a force of habit to have it on me. I always thought that the cops would be lenient if it was pretty obvious that you were maybe on your way to work, and you used it there. Or if you needed the blade for fishing. In fact, mates and I got stopped by the cops a while back when we were heading home from a fishing trip, I had a big filleting knife in a sheath on my belt. Cops were ok about it as it was obvious we had been usin it for choppin up bait
-
First off I will say that I am no lawyer so this is all a matter of personal opinion. If you truly are carrying a locking MT to and from work you should be OK, but I don't think that covers you for any stops on the way, so if you are going home via the shops I think you are on thin ice.
If you are carrying it for a specific (and legal) reason again I believe you should be just fine. So your fishing trip or similar sounds perfectly reasonable to me. For my own part I feel perfectly justified in carrying a fixed blade and an axe if I am heading out on a weekend of wild camping.
Long and short of it is though that by carrying a slip joint over 3" long, locking or fixed blade without a specific and good reason you are going to be on the wrong side of the law. I would also think just how stringently enforced the law is might depend on exactly where you are in Scotland. Live in Glasgow? No way on Earth I'd risk being caught with a locking knife. Live in rural Sutherland? Chances are you'll not encounter any issues, but I'm still not sure I'd risk a stay in prison to test that theory. ;)
One thought I have had would be to remove the blade on your MT altogether and carry a small non-locking knife as a companion.
-
I wasn't sure before but now I am. Just came out of the cinema after watching Oblivion and thought "Did Jack Harper cut those wires with a Leatherman Skeletool?" YES, HE DID, THE LEATHERMAN SKELETOOL SILVER AAARRRGGGHHH!! :)
Gareth, I was of course speaking hypothetically, I would never knowingly carry such an implement :)
-
Bought a Wingman and it came in the mail today with a few other goodies. It seems decent enough from initial handling, although the scissors require a bit of extra effort to fully open and engage the lock, but maybe that'll improve if I play around with it...

-
My scissors were a little stiff to start with. After a couple of months they are better. When I open the scissors I push the final open toward the cutting end of the scissors and they lock easily. It is kind of like if the scissors are open they lock easier.

-
I used a Gerber Octane for the longest time. It performed well for what it was. I purchased a Leatherman Sidekick and came back home. I'm so happy. I promised myself I wouldn't cry :'(
-
@THE_LONGBOW said:
"It is kind of like if the scissors are open they lock easier."
Yep, that does the trick, thanks! If the scissors are still in the compact position when folded out, the lock doesn't want to pop into place... :)
-
I do own a Sidekick and 2 Wingmen, so I´m in, i´d say.
I did not carry the tools a lot.One had a loose Plier Pivot that i made a bit tigther with a Center punch and a flat punch.
You can see the punchmark in the Pivot.At the Moment one of the Wingman tools is apart as I´m thinking about modding it.
I do have a Gerber Strata Plier head which has replaceable carbide cutters and which look as if they will work with minor reprofiling.

-
@lowtech said:
I do own a Sidekick and 2 Wingmen, so I´m in, i´d say.
I did not carry the tools a lot.One had a loose Plier Pivot that i made a bit tigther with a Center punch and a flat punch.
You can see the punchmark in the Pivot.At the Moment one of the Wingman tools is apart as I´m thinking about modding it.
I do have a Gerber Strata Plier head which has replaceable carbide cutters and which look as if they will work with minor reprofiling.
If I had known what you do to wingmen before I sent one... :P Is mine the one that is not dismantled? I was aware some modding would take place.
-
I promise, i won´t hurt the poor thing.
Unless you think mixing in Gerber parts actually is hurting it, but i don´t suppose this is the case.
I´m not sure, i believe your´s had a plier head with nearly no play, so i left it alone.I would like to make a blunt nose out of one of teh pliers, but i know noone with a mill and i am afraid any fast cutting tools (like an angle grinder or a belt sander) will bugge up the heat treat.
The other "modding" will be a Mix and matching of tools of the Sidekick and Wingman, i guess. And I´m thinking about (partially) mediablasting the frame of one of the tools.
-
All is good. You are a better home for it, my wave sees all the use. I want to see your finished mods with them!
-
I'd like my Sidekick a lot more if it didn't have sprung pliers. :-\
-
-
i've spotted the 'survival tin' , not seen them before, need more info. time to share

-

thanks ! -
I bought it just for the tin. I wanted to fit a few other essentials in it being that it is a little larger than the Altoids tin.
-
Well dragging this up to the top again. I have been using my Wingman for a lot of different chores around my house the last month, more than usual. I have to say it has become my go to tool. It was cheap enough that I don't feel guilty to use it for any thing. The other day I was out on my property and saw some nasty weeds I tried to pull them but the roots stayed. So out comes the Wingman pushed into the dirt and pulled the root.
In my house I have been doing some minor remodeling and it has been very handy for outlet screws, cutting old phone lines, to pulling a stir stick that fell in to the can of stain. Not to mention scrapping and cutting.
Needless to say I am pleased with my Wingman. -
I thought this tool looked like a crappy tool, UNTIL I got one. my hardware store has them for $19.99, so I bought one. the next day I went back and got another! yes, my Surge is better, yes I do not care for the combo blade, but for $20 I cannot even get a PS4!
is it my favorite LM? no
is is a good tool? yes
do I think $20 is an awesome price? YES! -
well said !

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
