Surge Owners Club
-
Some blades are shorter than the LM's (metal and fine wood usually) so you can store them, others are longer (wood fast and regular) and you have to take them out or cut the tip of them ( but longer is more efficient). About how they last I don't know but, since they are cheap by the dozen, who cares?
-
With the old style Surge the Bosch blades wiggle a bit cause they are thinner than the LM blades so a shim of some sorts to keep it from wiggling is useful. The 2013 updated Surge now has that problem fixed. As for the length of the blades, kkokkolis has it right.

-
@kkokkolis said:
Some blades are shorter than the LM's (metal and fine wood usually) so you can store them, others are longer (wood fast and regular) and you have to take them out or cut the tip of them ( but longer is more efficient). About how they last I don't know but, since they are cheap by the dozen, who cares?@enki_ck said:
With the old style Surge the Bosch blades wiggle a bit cause they are thinner than the LM blades so a shim of some sorts to keep it from wiggling is useful. The 2013 updated Surge now has that problem fixed. As for the length of the blades, kkokkolis has it right.
Ok thanks the Bosch blades sound like the cheap way to go!
-
I tried the wood saws. All worked fine but the Leatherman is the most aggressive. I wonder if the Bosch blades are better (these I got were cheap Chinese generic saws). If so I would get just two, metal and fast wood.

-
I´m in, too.
Until now, i did not carry the Surge at work, as i regularly need a Bluntnose Plier.Metro did help me out and provided a blunted head which i dropped in.
iIwill tear the whole tool apart, as i have seen quite some lint/oil muck inside upon closer inspection.Maybe i´ll round some edges while it is apart and i will definetely bend the one leg a bit inwards so it sits flush with it´s cast end piece.

-
Very nice Thomas,eric is great for helping us realise our dream mt

-
In other places he would be called an enabler, but i like to think of him as a friendly guy supplying my fix ;-)
His Skinth´s are super awesome and the Bluntnose Plier head is very well made - Although he made me a very good price on it, he put some work in it and not only milled the head down but chamfered the edges and gave everything a once over with sanding paper to get an even and stock looking surface.
-
@lowtech said:
In other places he would be called an enabler, but i like to think of him as a friendly guy supplying my fix ;-)His Skinth´s are super awesome and the Bluntnose Plier head is very well made - Although he made me a very good price on it, he put soem work in it and not only milled teh head down but chamfered the edges and gave everything a once over with sanding paper to get an even and stock looking surface.
Erics skinths are on my list 
-
Very nice. A blunt nose is handy for nails and working with wire. But for general purpose a needle nose is more suited.
Needing both is an excuse for carrying two Multitools! -
I looked for a post or topic about this but didn't see one, I was wondering what you all use to clean/de-rust your tools. I was thinking of a good penetrating oil or gun oil?
PS: I love the blunt nose pliers!
-
I use my tool at work to loosen and tighthen small diameter pipe fixings. The room is so tight that a needleneose will hit the wall behind the pipe instead of letting me turn it.
Apart from that, i came to like Bluntnosed tools when doing roadside repairs on my bikes. -
@JD15 said:
I looked for a post or topic about this but didn't see one, I was wondering what you all use to clean/de-rust your tools. I was thinking of a good penetrating oil or gun oil?PS: I love the blunt nose pliers!
I bath my mt's in washing up liquid and bicycle oil, then wash off and dry,then I use nano oil for joints and tools, i've never in 16 years suffered rust issues with my lm's

-
-
Did you do the jimmping on the blade spines? Looks good man!

-
-
I cannot wait the new Surge, but I have a questions to all MUT and ST300 users.
What are your impressions regarding new plier head? Replaceable cutters are obvious advantage but how obout strenght? I hate the flex in my current Surge when you are trying to bend something. Are they much bigger/hard to work in small spaces?Any thoughts would be nice.
-
@BigMatt said:
I cannot wait the new Surge, but I have a questions to all MUT and ST300 users.
What are your impressions regarding new plier head? Replaceable cutters are obvious advantage but how obout strenght?** I hate the flex in my current Surge when you are trying to bend something.** Are they much bigger/hard to work in small spaces?Any thoughts would be nice.
I don't own a Surge myself, but I guess any flex would be in the handles, not in the plier head...
-
Plier head itself. It's longer than fe Charge so when you grab something thick that's sticking out and try to bend it to the side the "prongs" of the pliers start to offset.
Or when you reach for a nut from the top with plier tips and try to tighten it they will flex and slip.
I'm not saying Surge is soft, it happends when you really lean on it with both hands. -
Sounds like you are putting a lot of rotational force on the plier head, which they aren't designed for, particularly needle-nose pliers (and you run the risk of tweaking the joint or breaking the head altogether, they are only cast, not forged).
Would a blunt-nose conversion (milling off the narrow ends) make them better suited to the way you use them ? It would increase the strength in two ways - more metal at the working point, plus significantly less leverage.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



