Got my tool today.
-
I'm putting this in General discussion because I know alot of people have heard me rant and rave against this tool in the past, but I just got the Swisstool that a friend sent me, and I have to admit, I was wrong. Like I said, it was my first multitool, and I never had anything to compare it too, but after having dabbled a bit, I now believe the hype. This is a GREAT multitool. Mine is well used, and it shows (the red Victorinox label is comming off, and there are scuff and scratch marks everywhere), but it's all good. It adds to the character, you know? Everything is still fully functional, and it is not nearly as heavy as I remember it being. Holding them in my hand, the weight difference between my Wave and the Swisstool isn't really that great. It's actually THINNER then my Wave and my Blast, and while a little tough, the tools aren't that bad to take out. Granted, this is an original Swisstool, so it might be over ten years old and the springs might have given a little, but they are still plenty stiff. One thing I noticed, though, when using the pliers. The handles seemed a little off center. I thought it was because alot of torque had been put on it and it bent up, but when looking at the under side of the handles, THEY were perfectly aligned. I then measured them and one side of each handle is a little wider then the other. Is this normal? I thought it was a malfunction, but it appears to be by design. I have to say, for all the times I put this tool down, and for all I may have offended with my comments, YOU GUYS ARE RIGHT!! The Swisstool friggin rules. Heavy, tough, pretty (even my old lady) and functional. This just might be the KING of Multitools.
My name is Navajero316, and I am now a Swisstool addict. -
Took you long enough to come around Knife-User! :D
-
what a man, admit his mistakes! congrats bro
, how about some pictures! -
Yes, some pics if it's possible.
-
Good man, I think the Swisstool is one of those tool you need time with before it's greatness becomes really apparent :)
-
Some pics would be really great . As for the handles being out of line I think I know what you mean .Let me try to explain . The side of the handle that has 1cm to 11cm measure on it is wider the the side with the red label and the same for the other handle . I took these pics in a rush coz I should be somewhere else ::) Hope they help



Dunc
-
SwissTool handles are not all one piece. The side panels are not all the same part as on a Leatherman for example. Notice how one side wraps under the little backspring fingers, and the other side folds on top of the first one. (if that makes sense)
So all SwissTool handles have one side that is slightly wider than the other.
-
I'm glad you have fallen for the Swisstool in the end. :)
And yeah, like the guys have already said, the handles are just like that.
-
The handles are however made for right handed people, the high sides are on the wrong side for lefties. Not that its uncomfortable it's just an observation.
-
That's interesting about the handles. It's something I hadn't noticed first ime around. Good to know. If they are all like that, I wonder if there is a practical/functional reason behind it
-
I dunno ???
The Spirit is made that way too, so there is probably a reason.

-
Swisstools are funny things , its easy to take them for granted but you soon miss them if you dont have one with you .
Dunc
-
I used mine today at work a ton. From using the pliers to take apart animal enclosures, to the knife for cutting up lunch, my Swisstool saw alot of action, and it performed like a champ. Funny, I was worrying about scratching it up and all, but then remembered this particular tool is about ten years old, and still looks good. I rubbed the red label off the side, as it was all chipped and faded when I got the tool, but other then those scratches that I put on the handle, it looks great. I was definietly wrong about this tool. After having a Wave SOG Power pliers, and Blast, it feels so thin. A little heavy, but not the huge, obtrusive tool I remembered. I haven't been this excited about a tool since I got my Wave and it was a novelty.I am looking forward to life with this Swiss girl.

-
Congrats on your first MT,but I'm sure it is not going to be your last one!!!
-
@Smitty44 said:
Congrats on your first MT,but I'm sure it is not going to be your last one!!!Actually, Smitty, the Swisstool (not this one in particular) was my first multitool, many years ago, and I didn't like it at all. I had never had one before, so I thought it was too heavy and the tools were too tough to get out, etc. I gave it away and have had many other tools over the years, whether owned or borrowed, and now that I have returned to the Swisstool, I have a new found appreciation for it. It is everything I have been looking for in a tool. To go back to your post, it's not my first, but it just might be my last. LOL. Although there are other Swisstool models. And the Spirit. Hmmmmmmmmmm....................................
-
Multiple Spirit models....

Def
-
Well, I've had my Swisstool for over a week now, and man has it been put to use. We just got a wild, 10 foot crocodile at Gatorland this week, and when it had been caught, they used some steel cables to keep it's mouth shut. No, actually it was biting it, as it was in it's mouth when it was taped up (I have no idea why they used the cable, but there it was) and when it came time for us to release the croc in our park, one of our guys was using a $10 chinese Winchester multitool to cut the cable. It just wasn't working. The threaded steel was warping and twisting. He couldn;t get any purchase on it. So out comes the Swisstool, and snip snip, I cut the cables like butter. I had to use more cuts, since the wire cutters on the swisstool are small, but whatever, it worked like a charm. I then used the pliers to pull the cable out of the croc's mouth (he was still taped up so we wouldn't get killed, but with the sever ends of the cable loose, it just slid out of his mouth). I then used the tool as in impromtu hammer to stick a protruding nail on the enclosure's door back in, and the saw to cut a piece of wood to use as a bar on said door. I later used the screw drivers (Phillip's head and large flathead) to fix our golf cart, and the knife blade to cut up some food for lunch. I find myself using the tool everyday, and again, it feels alot lighter then i remember it. Also, it's slim profile makes it comfortable for me to handle. And it's such a tank, I am not afraid to lean on it a little bit. I am so glad to have given this tool a second chance. It is my favorite tool to date. Surge? Core? Swisstool is the ultimate multitool. It rules.
-
WRONG! The SURGE!! is the ultimate MT!
-
Good to hear you're getting on with it so well Navajero.
How about the blades? Is it any problem to get them open in the wet environment you work in?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



